Can’t connect my fader bank to the editor, need help !!! about 16n

[infovore]

Sure, let's go over some diagnostics:

• what version firmware is your 16n running?
• was the Teensy on it used for anything else beforehand?
• did you assemble the 16n yourself?

[Photozik]

Thanks Tom.
I didn't assemble the 16n myself. It's a second hand. It was originally made by Big T Music in UK but I bought it in US.
So I don't know if the Teensy was used before but I guess no, as it is a "factory" like unit.
The version mentioned on the advertisement is 2.0.0.

[infovore]

Ah, OK. You might need to upgrade the firmware to a more recent version, though this possibly gives me a clue to a bug on my end with the editor.

Latest firmware is 2.1.0, and you can download it here - you just need 16n_v210.hex. Instructions for updating are here - you just need to download a piece of software called Teensy Loader, hook up your 16n, and flash it - you don't need to compile any code or anything.

If you can upgrade it to 2.1.0, that'd help me continue debugging.

[Photozik]

ok. Great !
I will do that and tell you.
Thanks.

[Photozik]

It seems to work now ! The 16n interface is on.
I just see that some faders go from 0 to 122, and some from 0 to 123.

[infovore]

That's great. OK, so what you've got is a minor calibration that needs doing, which is what the editor's for. Plug in your 16n and in the editor, click Edit Config, then go to the Device Options tab. The "maximum raw value" might be set to 8135. Make that number a bit smaller - start with about 8000, I'm guessing - and hit "Update Controller" top right. Then, see how far the CC values alter. Keep bringing the "maximum raw value" down a bit until you get full 0-127 travel.

[Photozik]

Done ! Every fader at 127 !

[infovore]

Great news. I'm going to close this thread now, enjoy your faders!

[Photozik]

Thanks a lot Tom !!!
Have a nice day.