USB Mapping about gigabyte-z490-vision-g-hackintosh-opencore

[5T33Z0]

Check the Additional Files Section for a List of mapped USB Ports and a zip with a USB Ports kext.

[mroncetwice]

I see this issue is closed, but hoping to get some help. This EFI is great, but I am not able to connect to USB-C devices nor am I seeing USB-C in System Report.

Everything else, besides ethernet, seems to work great. Im using a Z490 Vision G, i9-10850k, and Sapphire RX580.

EDIT:

Sorry, i saw 5T33Z0's comment in issue #2 and am learning Hackintool to make my own map.

Thank you so much, 5T33Z0, for this EFI repo.

[kuczynsky]

Hi, Due to the port limit, USB-C is not mapped there. I have tried to map it by sacrificing some other USB ports, but I have encountered the wakelocks and decided not to proceed - not a big deal for me as I do not have any devices that would connect to that port. Sent from Outlook for iOS<https://aka.ms/o0ukef>

…

________________________________ From: Jonathan Mills ***@***.***> Sent: Sunday, January 8, 2023 12:40:04 AM To: 5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore ***@***.***> Cc: kuczynsky ***@***.***>; Author ***@***.***> Subject: Re: [5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore] USB Mapping (Issue #30) I see this issue is closed, but hoping to get some help. This EFI is great, but I am not able to connect to USB-C devices nor am I seeing USB-C in System Report. Everything else, besides ethernet, seems to work great. Im using a Z490 Vision G, i9-10850k, and Sapphire RX580. — Reply to this email directly, view it on GitHub<#30 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A2SLPIQ7P7UJHBVIY2OR4ODWRIEGJANCNFSM6AAAAAASCHVRPQ>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[5T33Z0]

USB-C is not mapped since I don't use it. It has ports HS06 and SS06.

You can check the list of mapped ports here: https://github.com/5T33Z0/Gigabyte-Z490-Vision-G-Hackintosh-OpenCore/blob/main/Additional_Files/USB_Ports_List.pdf

You could – for example – disable the 2 USB 2.0-only ports HS 11 and SS 13 following my ACPI Port Mapping guide and then re-enable HS06 and SS06 by deleting the If (_OSI ("Darwin")) section from methods _UPC and _PLD. The port type is 0x09 (USB C with a switch).