Andy4495/AY3891x
Platform-independent Arduino library for General Instrument AY-3-8910 / AY-3-8912 Programmable Sound Generator chip and its clones (YM2149, YM3439, T7766A, among others).
Arduino, MSP430, Z-80
Repositories
Andy4495/emulator-8-bit
CPU emulator and disassembler for 8-bit processors. Currently supports Z80 and my Homemade CPU.
Andy4495/skat-scoresheet
Scoresheet for the Skat card game.
Andy4495/timex-sinclair-1000
Notes on restoring and using a vintage Timex Sinclair 1000 / Sinclair ZX81 personal computer.
Andy4495/SWI2C
Software I2C interface library for Arduino. Does not use any platform-specific code, and has a much simpler API than standard Wire library.
Andy4495/TI_Platform_Cores_For_Arduino
Use Arduino as a replacement for Energia to develop on Texas Instruments LaunchPad products in the MSP430, MSP432, and Tiva families.
Andy4495/.github
General templates, starter workflows, and reusable workflows for my repos.
Andy4495/HCMS39xx
Arduino library to interface with Broadcom/Avago HCMS-39xx and HCMS-29xx series LED displays.
Andy4495/Repo-Status
A single place to check the status of all my repositories.
Andy4495/Homemade-CPU
Designing my own CPU.
Andy4495/act
Run your GitHub Actions locally 🚀
Andy4495/USB_Host_ASCII_Keyboard
Converts USB keyboard into plain ASCII over Arduino Serial port using USB Host Shield.
Andy4495/TI-30-Keypad-Interface
Hardware interface information and Arduino sketch to simulate the keypad of the original bubble-lens LED TI-30 calculator.
Andy4495/TIL306
Arduino library to control Texas Instruments TIL306 and TIL307 numeric LED displays.
Andy4495/Noritake-GU7000
Noritake GU7000 Vacuum Fluorescent Display (VFD)
Andy4495/PiMac
The "PiMac" -- converting a 2005 iMac G5 into a Raspberry Pi desktop.
Andy4495/matrix-keypad-library
Simple-to-use matrix keypad library.
Andy4495/OneMsTaskTimer
This is a copy of the OneMsTaskTimer library that is included with the Energia application.
Andy4495/Energia-EducationalBP_MKII
Educational BoosterPack MkII examples from Energia application packaged as a library so they can be loaded into Arduino.
Andy4495/MspTandV
Calculates calibrated chip temperature and Vcc voltage using factory calibration values stored in chip TLV structure in MSP430 controllers. Vcc measurement is useful for battery-operated operation to determine when the battery is running low. Also calculates calibrated ADC values when using the chip's internal voltage reference.
Andy4495/Energia-MultiTasking
Multi-tasking examples from Energia application packaged as a library so they can be loaded into Arduino.
Andy4495/ICM7218
Library to interface with Intersil/Renesas and Maxim ICM7218 and Intersil/Renesas ICM7228 LED driver chips. Compatible with Arduino and Energia.
Andy4495/GitHub-Actions-and-act
Summary of usage of GitHub Actions and the related tool act by nektos. Describes a fix for running Arduino compile-sketches workflow with act.
Andy4495/NewhavenOLED
Arduino library for Newhaven OLED displays using US2066 controller chip. Bit-bang SPI implementation allows selection of any I/O pins to control the display.
Andy4495/TLC591x
Library for Texas Instruments TLC5916 and TLC5917 constant current LED sink driver for Arduino.
Andy4495/Windows10-on-iMac2011
Install Windows 10 on 2011 iMac using Boot Camp. Also includes tips for replacing the HDD with an SSD.
Andy4495/Outdoor-Weather-Sensor
Outdoor wireless weather sensor based on TI MSP-EXP430G2 LaunchPad, SENSORHUB BoosterPack and CC110L BoosterPack. Optimized for low-power operation, 2xAA cells should be able to power the device for well over a year.
Andy4495/ESP-WiFi-DS18B20-Temp-Sensor
ESP8266-based WiFi temperature monitor using two DS18B20 1-Wire sensors.
Andy4495/BQ27441_SWI2C
This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using software I2C. This allows the device to be connected to any two available I/O pins instead of the hardware-specific I2C peripheral pins.
Andy4495/MSP430TempSensorLCD
Wireless temperature sensor which uses an MSP-EXP430FR4133 or MSP-EXPFR6989 LaunchPad, 430BOOST-CC110L wireless transceiver, and BOOSTXL-BATTPACK LiPo power source,.