PaulZC/SparkFun_u-blox_GNSS_v4
An Arduino Library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface
Paul Clark - SparkFun Engineer
Repositories
PaulZC/library-registry
Arduino Library Manager list
PaulZC/GDEM0097T61_Arduino
A fork of GoodDisplay's Arduino demo for the GDEM0097T61 0.97 inch e-paper display
PaulZC/ZED-F9P_FeatherWing_USB
A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
PaulZC/F9P_RAWX_Logger
A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates the u-blox ZED-F9P dual band (L1 + L2) GNSS receiver
PaulZC/ZED-F9P_FeatherWing
A GNSS FeatherWing incorporating the u-blox ZED-F9P
PaulZC/CTA_Calibration_Flasher_LED_Board_V3
A compact LED flasher board with digital pulse-width and current control
PaulZC/NEO-M8T_GNSS_FeatherWing
A clone of the Adafruit GPS FeatherWing incorporating the u-blox NEO-M8T (external antenna). Designed to work with the Adafruit Feather M0 Adalogger for RAWX GNSS post-process precise positioning.
PaulZC/CTA_Calibration_Flasher_Controller_Board_V3
An LED flasher controller board based on the SAMD21G18A and WIZnet W5500
PaulZC/GP2Y1010AU0F_Dust_Sensor
Hook-up guide for the Sharp GP2Y1010AU0F Optical Dust Sensor
PaulZC/Iridium_9603_Beacon
Lightweight Iridium 9603N Beacon / Tracker suitable for High Altitude Ballooning, asset tracking and other remote monitoring applications. With the option of solar power.
PaulZC/Iridium_9603N_Mini_Beacon
A miniature version of the Iridium 9603N Beacon (without eRIC4/9 radio)
PaulZC/Project-Desert-Tortoise
A demodulator written in C to decode IQ data from the 137.35Mhz/137.77Mhz telemetry beacons from NOAA-15, NOAA-18, and NOAA-19
PaulZC/Arduino_ZModem
Arduino SD Card file transfer over Serial using the ZModem protocol
PaulZC/Pi_Eyes
A remix of Adafruit's Animated Snake Eyes for Raspberry Pi
PaulZC/SRTM_to_STL
Converts NASA SRTM data into STL for 3D printing
PaulZC/Iridium_SBD_Tools
Python software tools to aid Iridium SBD tracker projects
PaulZC/hpg
This project demonstrates a full RTK solution with built in correction services.
PaulZC/Qwiic_PT100_Library
A library to support Platinum Resistance Thermometer measurements using the TI ADS122C04 24-bit ADC
PaulZC/Arctic_Circle_Crossing_Predictor
Python tools to help predict when a vessel will cross the Arctic Circle
PaulZC/Balloon_Calculator
Calculates burst altitudes and ascent rates for single and dual balloon launches
PaulZC/Data_Recovery_System
Repository for the SuperBIT Data Recovery System (a.k.a. the data drop capsule)
PaulZC/Iridium_Beacon_Radio_Board
An eRIC radio board for the Iridium 9603N Beacon, allowing remote control of other radio-enabled devices near the beacon
PaulZC/Absolute_Relativity
How to use absolute and relative imports in Python3
PaulZC/MAX-M8Q_GPS_FeatherWing
A clone of the Adafruit GPS FeatherWing incorporating the u-blox MAX-M8Q (external antenna). Includes GPX and CSV Logger code for the Adafruit Feather M0 Adalogger.
PaulZC/RAWX_Logger_Switches
A switch PCB for the ZED-F9P_FeatherWing and ZED-F9P_FeatherWing_USB
PaulZC/SAM-M8Q_GPS_FeatherWing
A clone of the Adafruit GPS FeatherWing incorporating the u-blox SAM-M8Q (built-in antenna). Includes GPX and CSV Logger code for the Adafruit Feather M0 Adalogger.
PaulZC/Iridium_9603N_Solar_Beacon
Lightweight solar-powered Iridium 9603N + GNSS beacon (tracker)
PaulZC/Dual_Color_SRTM_and_GPX_to_STL
Creates two STL files for 3D printing from NASA SRTM and a GPX route