#28 · open · 45 comments
So sorry to ask, but is there any chance this will be ported to Python 3? I would like to incorporate this into the Social Media Macroscope (www.socialmediamacroscope.org), and open-source analytics environment for researching social media data built by academia (I am the PI).
there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection)
> > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3?
Thanks for converting Jia! How compute intense would you guys think this is to have the trained model stored and accessible to run via either an API call or just a direct call to the trained model (if that makes sense)? I'm trying to incorporate this into my open-source social media analytics science gateway (www.socialmediamacroscope.org). ------ Joseph T. Yun https://www.josephtyun.com On Wed, Nov 6, 2019 at 5:46 AM amirmohammadkz <[email protected]> wrote: > there seem to be quite a few issues apart from its incompatibility with > python3. The data processing was very memory intensive. so @amirmohammadkz > <https://github.com/amirmohammadkz> made some major improvements. I > forked his repo and made it python3 compatible > <https://github.com/ichenjia/personality-detection> > > Thanks for using my forked repo. Could you run the whole code, especially > the Theano model, on python 3? > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <https://github.com/SenticNet/personality-detection/issues/28?email_source=notifications&email_token=AD3SPHOLOJDOYFPST4E4WH3QSKVCPA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDGIMHY#issuecomment-550274591>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AD3SPHNJ5BW7XNAJKA6III3QSKVCPANCNFSM4IQLO6OA> > . >
> > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__`
> Thanks for converting Jia! How compute intense would you guys think this is to have the trained model stored and accessible to run via either an API call or just a direct call to the trained model (if that makes sense)? I'm trying to incorporate this into my open-source social media analytics science gateway ([www.socialmediamacroscope.org](http://www.socialmediamacroscope.org)). > […](#) > ------ Joseph T. Yun https://www.josephtyun.com > On Wed, Nov 6, 2019 at 5:46 AM amirmohammadkz ***@***.***> wrote: there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz <https://github.com/amirmohammadkz> made some major improvements. I forked his repo and made it python3 compatible <https://github.com/ichenjia/personality-detection> Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28?email_source=notifications&email_token=AD3SPHOLOJDOYFPST4E4WH3QSKVCPA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDGIMHY#issuecomment-550274591>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AD3SPHNJ5BW7XNAJKA6III3QSKVCPANCNFSM4IQLO6OA> . I am using a 1080 Ti GPU and 48G of RAM to train the model. It has been 12 hours and still running. It looks like it has done half of the training. But that said, it's getting gradually slower. I assume it may be a lot slower if I were using CPU. I plan to put the model in a flask server and call it via API. Not sure the type of server you have. Once the model is trained, the prediction should be a lot faster. The data prop may take a little more time as it is trying to embed the words.
by the way, did you figure out how to make the prediction yet? @amirmohammadkz The readme file only has info regarding data prep and training.
> > > > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > > > > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__` Actually, I had some problems with running `conv_net_train.py` ; it seems that Theano was incompatible with my system spec on python 3, so I preferred to use python 2.7 version.
> > > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > > > > > > > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > > > > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__` > > Actually, I had some problems with running `conv_net_train.py` ; it seems that Theano was incompatible with my system spec on python 3, so I preferred to use python 2.7 version. Hmm, not sure what's happening there. I used the GPU version and it was fine. What was the error? Not sure if you saw my earlier question, did you manage to get the prediction (given a blob of text) working? Do you have any code snippet showing how to do it?
> > > > Thanks for converting Jia! How compute intense would you guys think this is to have the trained model stored and accessible to run via either an API call or just a direct call to the trained model (if that makes sense)? I'm trying to incorporate this into my open-source social media analytics science gateway ([www.socialmediamacroscope.org](http://www.socialmediamacroscope.org)). > > […](#) > > ------ Joseph T. Yun https://www.josephtyun.com > > On Wed, Nov 6, 2019 at 5:46 AM amirmohammadkz _**@**_.***> wrote: there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz https://github.com/amirmohammadkz made some major improvements. I forked his repo and made it python3 compatible https://github.com/ichenjia/personality-detection Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28?email_source=notifications&email_token=AD3SPHOLOJDOYFPST4E4WH3QSKVCPA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDGIMHY#issuecomment-550274591>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3SPHNJ5BW7XNAJKA6III3QSKVCPANCNFSM4IQLO6OA . > > I am using a 1080 Ti GPU and 48G of RAM to train the model. It has been 12 hours and still running. It looks like it has done half of the training. But that said, it's getting gradually slower. I assume it may be a lot slower if I were using CPU. > > I plan to put the model in a flask server and call it via API. Not sure the type of server you have. Once the model is trained, the prediction should be a lot faster. The data prop may take a little more time as it is trying to embed the words. If you apply exactly the configuration I suggested in my `README.md`, it will take less than 42sec for each of your epochs. So, for every trait, you need about 5.83 hours. my spec was somehow weaker than yours (in RAM)
Jia, if you put it on a server and allow API access, would you be interested in allowing my open-source science gateway to connect to it for prediction? I am a research professor at University of Illinois Urbana Champaign and I built a science gateway for social media research so that academic researchers can analyze social media data without the need for coding skills. ------ Joseph T. Yun https://www.josephtyun.com On Wed, Nov 6, 2019 at 12:31 PM amirmohammadkz <[email protected]> wrote: > Thanks for converting Jia! How compute intense would you guys think this > is to have the trained model stored and accessible to run via either an API > call or just a direct call to the trained model (if that makes sense)? I'm > trying to incorporate this into my open-source social media analytics > science gateway (www.socialmediamacroscope.org). > … <#m_4894821366519155715_> > ------ Joseph T. Yun https://www.josephtyun.com > On Wed, Nov 6, 2019 at 5:46 AM amirmohammadkz *@*.***> wrote: there seem > to be quite a few issues apart from its incompatibility with python3. The > data processing was very memory intensive. so @amirmohammadkz > <https://github.com/amirmohammadkz> https://github.com/amirmohammadkz > made some major improvements. I forked his repo and made it python3 > compatible https://github.com/ichenjia/personality-detection Thanks for > using my forked repo. Could you run the whole code, especially the Theano > model, on python 3? — You are receiving this because you authored the > thread. Reply to this email directly, view it on GitHub <#28 > <https://github.com/SenticNet/personality-detection/issues/28>?email_source=notifications&email_token=AD3SPHOLOJDOYFPST4E4WH3QSKVCPA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDGIMHY#issuecomment-550274591>, > or unsubscribe > https://github.com/notifications/unsubscribe-auth/AD3SPHNJ5BW7XNAJKA6III3QSKVCPANCNFSM4IQLO6OA > . > > I am using a 1080 Ti GPU and 48G of RAM to train the model. It has been 12 > hours and still running. It looks like it has done half of the training. > But that said, it's getting gradually slower. I assume it may be a lot > slower if I were using CPU. > > I plan to put the model in a flask server and call it via API. Not sure > the type of server you have. Once the model is trained, the prediction > should be a lot faster. The data prop may take a little more time as it is > trying to embed the words. > > If you apply exactly the configuration I suggested in my README.md, it > will take less than 42sec for each of your epochs. So, for every trait, you > need about 5.83 hours. my spec was somehow weaker than yours (in RAM) > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <https://github.com/SenticNet/personality-detection/issues/28?email_source=notifications&email_token=AD3SPHJEGI42PKLPL6UOYDLQSMENHA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDHRBNI#issuecomment-550441141>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AD3SPHO4AM3DYNZV7ZBZ2B3QSMENHANCNFSM4IQLO6OA> > . >
> Jia, if you put it on a server and allow API access, would you be interested in allowing my open-source science gateway to connect to it for prediction? I am a research professor at University of Illinois Urbana Champaign and I built a science gateway for social media research so that academic researchers can analyze social media data without the need for coding skills. > […](#) > ------ Joseph T. Yun https://www.josephtyun.com On Wed, Nov 6, 2019 at 12:31 PM amirmohammadkz <[email protected]> wrote: > Thanks for converting Jia! How compute intense would you guys think this is to have the trained model stored and accessible to run via either an API call or just a direct call to the trained model (if that makes sense)? I'm trying to incorporate this into my open-source social media analytics science gateway ([www.socialmediamacroscope.org](http://www.socialmediamacroscope.org)). … <#m_4894821366519155715_> ------ Joseph T. Yun https://www.josephtyun.com On Wed, Nov 6, 2019 at 5:46 AM amirmohammadkz *@*.***> wrote: there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz <https://github.com/amirmohammadkz> https://github.com/amirmohammadkz made some major improvements. I forked his repo and made it python3 compatible https://github.com/ichenjia/personality-detection Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28 <#28>?email_source=notifications&email_token=AD3SPHOLOJDOYFPST4E4WH3QSKVCPA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDGIMHY#issuecomment-550274591>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3SPHNJ5BW7XNAJKA6III3QSKVCPANCNFSM4IQLO6OA . I am using a 1080 Ti GPU and 48G of RAM to train the model. It has been 12 hours and still running. It looks like it has done half of the training. But that said, it's getting gradually slower. I assume it may be a lot slower if I were using CPU. I plan to put the model in a flask server and call it via API. Not sure the type of server you have. Once the model is trained, the prediction should be a lot faster. The data prop may take a little more time as it is trying to embed the words. If you apply exactly the configuration I suggested in my README.md, it will take less than 42sec for each of your epochs. So, for every trait, you need about 5.83 hours. my spec was somehow weaker than yours (in RAM) — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#28?email_source=notifications&email_token=AD3SPHJEGI42PKLPL6UOYDLQSMENHA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDHRBNI#issuecomment-550441141>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AD3SPHO4AM3DYNZV7ZBZ2B3QSMENHANCNFSM4IQLO6OA> . Hi Joseph, Yes, we actually do social media analysis for enterprises for a living. So this is something we can definitely help with as long as it doesn't introduce an exuberant number of API calls. How about let me figure out how to do the prediction first and then I will put it on a server. Once that's done, I can email you an Auth key to call the API. wanna PM me your email address so I can keep you updated? Jia
> > > > > > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > > > > > > > > > > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > > > > > > > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__` > > > > > > Actually, I had some problems with running `conv_net_train.py` ; it seems that Theano was incompatible with my system spec on python 3, so I preferred to use python 2.7 version. > > Hmm, not sure what's happening there. I used the GPU version and it was fine. What was the error? > > Not sure if you saw my earlier question, did you manage to get the prediction (given a blob of text) working? Do you have any code snippet showing how to do it? I do not remember it precisely. I know that Theano has some problems with some hardware and operating systems. It is outdated now and will not get any updates. About the testing process, I am not sure about the detailed process. Theano testing process was so complicated, so we decided to reimplement the model with Keras and we used that. But you can get the accuracy of the model on your test dataset by replacing the original test set with yours
> > > > > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > > > > > > > > > > > > > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > > > > > > > > > > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__` > > > > > > > > > Actually, I had some problems with running `conv_net_train.py` ; it seems that Theano was incompatible with my system spec on python 3, so I preferred to use python 2.7 version. > > > > > > Hmm, not sure what's happening there. I used the GPU version and it was fine. What was the error? > > Not sure if you saw my earlier question, did you manage to get the prediction (given a blob of text) working? Do you have any code snippet showing how to do it? > > I do not remember it precisely. I know that Theano has some problems with some hardware and operating systems. It is outdated now and will not get any updates. > > About the testing process, I am not sure about the detailed process. Theano testing process was so complicated, so we decided to reimplement the model with Keras and we used that. But you can get the accuracy of the model on your test dataset by replacing the original test set with yours About Theano, although Yoshua Bengio said he wouldn't keep supporting it. It looks like Facebook team is taking over the maintenance. Although I agree with you that in the long run, this package should be rewritten with Keras or Torch. Do you have plans to open-source the Keras version? Thanks! J
> > > > > > > > > there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and [made it python3 compatible ](https://github.com/ichenjia/personality-detection) > > > > > > > > > > > > > > > > > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > > > > > > > > > > > > > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with `__name__` > > > > > > > > > > > > Actually, I had some problems with running `conv_net_train.py` ; it seems that Theano was incompatible with my system spec on python 3, so I preferred to use python 2.7 version. > > > > > > > > > Hmm, not sure what's happening there. I used the GPU version and it was fine. What was the error? > > > Not sure if you saw my earlier question, did you manage to get the prediction (given a blob of text) working? Do you have any code snippet showing how to do it? > > > > > > I do not remember it precisely. I know that Theano has some problems with some hardware and operating systems. It is outdated now and will not get any updates. > > About the testing process, I am not sure about the detailed process. Theano testing process was so complicated, so we decided to reimplement the model with Keras and we used that. But you can get the accuracy of the model on your test dataset by replacing the original test set with yours > > About Theano, although Yoshua Bengio said he wouldn't keep supporting it. It looks like Facebook team is taking over the maintenance. Although I agree with you that in the long run, this package should be rewritten with Keras or Torch. Do you have plans to open-source the Keras version? > > Thanks! > > J Yes; my colleague, @saminfatehir, was in charge of that. we will provide it for you and @jtyun in the coming days if you need.
Thank you both! Jia, I have emailed you from my university email.
> Yes; my colleague, @saminfatehir, was in charge of that. we will provide it for you and @jtyun in the coming days if you need. Fantastic. Look forward to seeing the Keras version and contribute. Thanks a lot
Your welcome :) Besides, we have implemented another model on this task which outperformed this model in both performance and accuracy on this dataset. If you are interested in its updates, you can send me a message.
Great. Let me do that now.
> > > > Yes; my colleague, @saminfatehir, was in charge of that. we will provide it for you and @jtyun in the coming days if you need. > > Fantastic. Look forward to seeing the Keras version and contribute. Thanks a lot The Keras version is now available on my forked repo.
What I can do is to train it with Keras on our machine and see how it works out. I will also try tune it with Python3 . Stay tuned. Jia > On Dec 4, 2019, at 12:41 AM, amirmohammadkz <[email protected]> wrote: > > Yes; my colleague, @saminfatehir <https://github.com/saminfatehir>, was in charge of that. we will provide it for you and @jtyun <https://github.com/jtyun> in the coming days if you need. > > Fantastic. Look forward to seeing the Keras version and contribute. Thanks a lot > > The Keras version is now available on my forked repo. > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub <https://github.com/SenticNet/personality-detection/issues/28?email_source=notifications&email_token=AA4MCG6CCGCB6VG3ZPBARNLQW5ULLA5CNFSM4IQLO6OKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEF4FZXI#issuecomment-561536221>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4MCG6AK3ZF7YJR5SKH3K3QW5ULLANCNFSM4IQLO6OA>. >
The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :)
check this https://github.com/laifi/Keras-BigFive-personality-traits
> there seem to be quite a few issues apart from its incompatibility with python3. The data processing was very memory intensive. so @amirmohammadkz made some major improvements. I forked his repo and made it python3 compatible > > Thanks for using my forked repo. Could you run the whole code, especially the Theano model, on python 3? > > Yeah, I got it working running with Python3. The error about func_name was fixed by replacing it with __name__ could you upload the modified code?
> Your welcome :) > Besides, we have implemented another model on this task which outperformed this model in both performance and accuracy on this dataset. If you are interested in its updates, you can send me a message. Hello, Could you add the link or send me the updated code with improvements
> The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) IndexError: list index out of range
> > > > Your welcome :) > > Besides, we have implemented another model on this task which outperformed this model in both performance and accuracy on this dataset. If you are interested in its updates, you can send me a message. > > Hello, > Could you add the link or send me the updated code with improvements We will publish it with the paper soon.
> > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > IndexError: list index out of range Could you please give us more information? The python file and error line?
> > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > IndexError: list index out of range > > Could you please give us more information? The python file and error line? 
> > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > IndexError: list index out of range > > > > > > Could you please give us more information? The python file and error line? > >  Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: `nano ~./theanorc` More information is here: http://deeplearning.net/software/theano/library/config.html If it solved your problem, we will be happy if you star our repo :)
> > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > >  > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > `nano ~./theanorc` > More information is here: > http://deeplearning.net/software/theano/library/config.html > If it solved your problem, we will be happy if you star our repo :)  no such file or directory is there how to solve this issue
> > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > >  > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > `nano ~./theanorc` > > More information is here: > > http://deeplearning.net/software/theano/library/config.html > > If it solved your problem, we will be happy if you star our repo :) > >  > no such file or directory is there how to solve this issue Create it! That is theano configuration file.
> > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > >  > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > `nano ~./theanorc` > > > More information is here: > > > http://deeplearning.net/software/theano/library/config.html > > > If it solved your problem, we will be happy if you star our repo :) > > > > > >  > > no such file or directory is there how to solve this issue > > Create it! That is theano configuration file. created but the process is killed again and again 
> > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > >  > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > `nano ~./theanorc` > More information is here: > http://deeplearning.net/software/theano/library/config.html > If it solved your problem, we will be happy if you star our repo :) created but the process is getting killed 
> > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > >  > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > `nano ~./theanorc` > > More information is here: > > http://deeplearning.net/software/theano/library/config.html > > If it solved your problem, we will be happy if you star our repo :) > > created but the process is getting killed >  There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code).
> > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > >  > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > `nano ~./theanorc` > > > More information is here: > > > http://deeplearning.net/software/theano/library/config.html > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > created but the process is getting killed > >  > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). I did it with batch size 40 but still the process is getting killed
> > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > >  > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > `nano ~./theanorc` > > > > More information is here: > > > > http://deeplearning.net/software/theano/library/config.html > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > created but the process is getting killed > > >  > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > I did it with batch size 40 but still the process is getting killed try batch size 1 and if it works, increase it. I tested this model with 16gb memory.
> > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > `nano ~./theanorc` > > > > > More information is here: > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > created but the process is getting killed > > > >  > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > I did it with batch size 40 but still the process is getting killed > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory.  I once run the code on cpu with batch size one and when i tried to run it with gpu i am getting this error. python setup.py build after running this code i am getting the error
> > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > > `nano ~./theanorc` > > > > > > More information is here: > > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > > > > created but the process is getting killed > > > > >  > > > > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > > > > I did it with batch size 40 but still the process is getting killed > > > > > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. > >  > I once run the code on cpu with batch size one and when i tried to run it with gpu i am getting this error. > python setup.py build after running this code i am getting the error one more doubt is that if i completely run the code using cpu what to do after completing training process or training output is the final result
> > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > `nano ~./theanorc` > > > > > More information is here: > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > created but the process is getting killed > > > >  > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > I did it with batch size 40 but still the process is getting killed > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. Help me regarding the issue posted above
> > > > > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > > > `nano ~./theanorc` > > > > > > > More information is here: > > > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > > > > > > > created but the process is getting killed > > > > > >  > > > > > > > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > > > > > > > I did it with batch size 40 but still the process is getting killed > > > > > > > > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. > > > > > >  > > I once run the code on cpu with batch size one and when i tried to run it with gpu i am getting this error. > > python setup.py build after running this code i am getting the error > > one more doubt is that if i completely run the code using cpu what to do after completing training process or training output is the final result The code evaluates the model on the test set and reports the result. If you want to use the trained model for another dataset, you can change it yourself
> > > > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > > `nano ~./theanorc` > > > > > > More information is here: > > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > > > > created but the process is getting killed > > > > >  > > > > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > > > > I did it with batch size 40 but still the process is getting killed > > > > > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. > > Help me regarding the issue posted above https://stackoverflow.com/a/726762/5661543
> > > > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > > `nano ~./theanorc` > > > > > > More information is here: > > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > > > > created but the process is getting killed > > > > >  > > > > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > > > > I did it with batch size 40 but still the process is getting killed > > > > > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. > >  > I once run the code on cpu with batch size one and when i tried to run it with gpu i am getting this error. > python setup.py build after running this code i am getting the error I recommend you to ask your question with full detail in the related repository: https://github.com/Theano/libgpuarray/issues
> > > > > > > > > > > The Keras code is written in python3. And a preprosessing python file is also added for it. So, you can enjoy using it without any modification :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > IndexError: list index out of range > > > > > > > > > > > > > > > > > > > > > > > > > > > Could you please give us more information? The python file and error line? > > > > > > > > > > > > > > > > > > > > > > > >  > > > > > > > > > > > > > > > > > > > > > Configure is not a terminal command. I meant that you must edit the ~./theanorc file. You can open it with nano or any other text editors. For example: > > > > > > > `nano ~./theanorc` > > > > > > > More information is here: > > > > > > > http://deeplearning.net/software/theano/library/config.html > > > > > > > If it solved your problem, we will be happy if you star our repo :) > > > > > > > > > > > > > > > > > > created but the process is getting killed > > > > > >  > > > > > > > > > > > > > > > There might be many reasons for it, like insuffìcient memory. Try running the model with lower batch size (edit the python code). > > > > > > > > > > > > I did it with batch size 40 but still the process is getting killed > > > > > > > > > try batch size 1 and if it works, increase it. I tested this model with 16gb memory. > > > > > >  > > I once run the code on cpu with batch size one and when i tried to run it with gpu i am getting this error. > > python setup.py build after running this code i am getting the error > > I recommend you to ask your question with full detail in the related repository: > https://github.com/Theano/libgpuarray/issues I have trained the model. Now my doubt is what is the command to test the model. Is it like python filname.py or we have to write some lines after filename.py.
Everything is available from [here](https://github.com/amirmohammadkz/personality-detection/blob/ebb8d28d1953093d9535ecff35b1c6cbc1a157af/conv_net_train_gpu.py#L217)
Hello, If you are looking for a faster version of personality detection with python 3 compatibility, our new paper, and its code is available here: https://github.com/amirmohammadkz/personality_detection The code is significantly faster and can be run on a regular computer/laptop. The accuracies are higher too.