TTN: Payload is not forwarded to the Application when the payload has more than seven bytes about adafruit_circuitpython_tinylora

[roamingthings]

Successfully tested with 32bytes payload

[ladyada]

not surprising - we've only use mini payloads. if you have a fix we'd super appreciate a PR, we cobbled this together from tinylora and it kinda works but is missing a lot :)

[jerryneedell]

FYI - I have confirmed this -- payload of 10 bytes fails -- I tried this fix, but it did not work:

diff --git a/adafruit_tinylora/adafruit_tinylora_encryption.py b/adafruit_tinylora/adafruit_tinylora_encryption.py
index 357c623..37de395 100755
--- a/adafruit_tinylora/adafruit_tinylora_encryption.py
+++ b/adafruit_tinylora/adafruit_tinylora_encryption.py
@@ -83,7 +83,7 @@ class AES():
         # k = data ptr
         k = 0
         i = 1
-        while i <= 1:
+        while i <= num_blocks:
             block_a[0] = 0x01
             block_a[1] = 0x00
             block_a[2] = 0x00

[jerryneedell]

Was tinylora ever tested with packets > 16 bytes either?

[roamingthings]

Some additional information:

I've attached a simple application that can be used for test purposes (you have to insert your keys, id and region). There are also two screenshots to illustrate whats getting to the gateway and what gets to the application at TTN.

What makes me wonder is that the data becomes "invalid" when the the full LoRa packet reaches 16bytes (two blocks mic). So I think it may have something to do with the encryption or calculation of the mic.

[roamingthings]

"""Simple program to demonstrate the issue with payloads larger than 7 bytes..
"""
import time
import busio
import digitalio
import board
from adafruit_tinylora.adafruit_tinylora import TTN, TinyLoRa

# Create library object using our bus SPI port for radio
spi = busio.SPI(board.SCK, MISO=board.MISO, MOSI=board.MOSI)

# RFM9x Breakout Pinouts (They are swapped compared to the original application since the tutorial had the pins swapped when it comes to soldering)
cs = digitalio.DigitalInOut(board.D6)
irq = digitalio.DigitalInOut(board.D5)

# TTN Device Address, 4 Bytes, MSB
devaddr = bytearray([0x00, 0x00, 0x00, 0x00])
 
# TTN Network Key, 16 Bytes, MSB
nwkey = bytearray([0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00])
 
# TTN Application Key, 16 Bytess, MSB
app = bytearray([0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00])

ttn_config = TTN(devaddr, nwkey, app, country='EU')
lora = TinyLoRa(spi, cs, irq, ttn_config)

# Data Packet to send to TTN
# 7 bytes of Payload are working
shortPayload = bytearray(7)
# 8 bytes and more won't
longPayload = bytearray(8)

while True:
        print('Sending short packet...')
        lora.send_data(shortPayload, len(shortPayload), lora.frame_counter)
        lora.frame_counter += 1
        print('Sending long packet...')
        lora.send_data(longPayload, len(longPayload), lora.frame_counter)
        lora.frame_counter += 1
        time.sleep(5)

[ladyada]

nope we only tested with very small packets - so this is probably a real bug

[jerryneedell]

OK -- I think I found the problem -- made these fixes

index 357c623..af8e388 100755
--- a/adafruit_tinylora/adafruit_tinylora_encryption.py
+++ b/adafruit_tinylora/adafruit_tinylora_encryption.py
@@ -83,7 +83,7 @@ class AES():
         # k = data ptr
         k = 0
         i = 1
-        while i <= 1:
+        while i <= num_blocks:
             block_a[0] = 0x01
             block_a[1] = 0x00
             block_a[2] = 0x00
@@ -272,11 +272,12 @@ class AES():
             old_data[i] = block_b[i]
         block_counter = 1
         # calculate until n-1 packet blocks
+        k = 0  # ptr
         while block_counter < num_blocks:
+#            k = 0  # ptr
             # copy data into array
-            k = 0  # ptr
             for i in range(16):
-                new_data[k] = lora_packet[i]
+                new_data[i] = lora_packet[k]
                 k += 1
             # XOR new_data with old_data
             self._xor_data(new_data, old_data)
@@ -290,7 +291,8 @@ class AES():
         # perform calculation on last block
         if incomplete_block_size == 0:
             for i in range(16):
-                new_data[i] = lora_packet[i]
+                new_data[i] = lora_packet[k]
+                k += 1
             # xor with key 1
             self._xor_data(new_data, key_k1)
             # xor with old data
@@ -299,10 +301,10 @@ class AES():
             self._aes_encrypt(new_data, self._network_key)
         else:
             # copy the remaining data
-            k = 0  # ptr
+ #           k = 0  # ptr
             for i in range(16):
                 if i < incomplete_block_size:
-                    new_data[k] = lora_packet[i]
+                    new_data[i] = lora_packet[k]
                     k += 1
                 if i == incomplete_block_size:
                     new_data[i] = 0x80

and my 10 byte payload is now getting to my appiicatiion

[jerryneedell]

I'll do a little more testing for larger packets then put in a PR

[roamingthings]

I can confirm that this patch works with a 15 byte payload

Great job @jerryneedell

[jerryneedell]

Great -- I also tested with a 30 byte payload and verified that it still works with a 6 byte payload. I'll create a PR later this evening or tomorrow.

[ladyada]

amazing! !!! thank you so much :)