unable to build pocketsphinx about adeept_picar-b

[adeept]

Hello Did you get an error when running setup.py? Is there a camera on the Raspberry Pi? Try to run the instructions a few more times? It may also be caused by network problems. Best! 2020-10-03 Adeept Technical Support Team Shenzhen Adeept Technology Co., Ltd. E-mail: [email protected] Website: www.adeept.com 发件人：Andrii Petrenko <[email protected]> 发送时间：2020-10-03 09:47 主题：[adeept/adeept_picar-b] unable to build pocketsphinx (#1) 收件人："adeept/adeept_picar-b"<[email protected]> 抄送："Subscribed"<[email protected]> hello, i have a problem building pocketsphinx Collecting pocketsphinx Using cached pocketsphinx-0.1.15.tar.gz (29.1 MB) Building wheels for collected packages: pocketsphinx Building wheel for pocketsphinx (setup.py) ... error ERROR: Command errored out with exit status 1: command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-3bxdmmdc/pocketsphinx/setup.py'"'"'; __file__='"'"'/tmp/pip-install-3bxdmmdc/pocketsphinx/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-l7rigx5b cwd: /tmp/pip-install-3bxdmmdc/pocketsphinx/ Complete output (239 lines): running bdist_wheel ..... building 'sphinxbase._ad_pulse' extension swigging swig/sphinxbase/ad_pulse.i to swig/sphinxbase/ad_pulse_wrap.c swig -python -modern -threads -Ideps/sphinxbase/include -Ideps/sphinxbase/include/sphinxbase -Ideps/sphinxbase/include/android -Ideps/sphinxbase/swig -outdir sphinxbase -o swig/sphinxbase/ad_pulse_wrap.c swig/sphinxbase/ad_pulse.i creating build/temp.linux-armv7l-3.7/swig creating build/temp.linux-armv7l-3.7/swig/sphinxbase creating build/temp.linux-armv7l-3.7/deps/sphinxbase/src/libsphinxad arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DSPHINXBASE_EXPORTS -DPOCKETSPHINX_EXPORTS -DSPHINX_DLL -DHAVE_CONFIG_H -Ideps/sphinxbase/include -Ideps/sphinxbase/include/sphinxbase -Ideps/sphinxbase/include/android -I/usr/include/python3.7m -c swig/sphinxbase/ad_pulse_wrap.c -o build/temp.linux-armv7l-3.7/swig/sphinxbase/ad_pulse_wrap.o -Wno-unused-label -Wno-strict-prototypes -Wno-parentheses -Wno-unused-but-set-variable -Wno-unused-variable -Wno-unused-result -Wno-sign-compare -Wno-misleading-indentation In file included from deps/sphinxbase/include/sphinxbase/ad.h:44, from swig/sphinxbase/ad_pulse_wrap.c:3046: deps/sphinxbase/include/android/sphinx_config.h:11: warning: "SIZEOF_LONG" redefined #define SIZEOF_LONG 8 In file included from /usr/include/python3.7m/pyconfig.h:13, from /usr/include/python3.7m/Python.h:8, from swig/sphinxbase/ad_pulse_wrap.c:150: /usr/include/arm-linux-gnueabihf/python3.7m/pyconfig.h:1363: note: this is the location of the previous definition #define SIZEOF_LONG 4 swig/sphinxbase/ad_pulse_wrap.c: In function ‘_wrap_Ad_readinto’: swig/sphinxbase/ad_pulse_wrap.c:3735:5: warning: ‘PyObject_AsWriteBuffer’ is deprecated [-Wdeprecated-declarations] res2 = PyObject_AsWriteBuffer(obj1, &buf2, &size2); ^~~~ In file included from /usr/include/python3.7m/Python.h:147, from swig/sphinxbase/ad_pulse_wrap.c:150: /usr/include/python3.7m/abstract.h:500:17: note: declared here PyAPI_FUNC(int) PyObject_AsWriteBuffer(PyObject *obj, ^~~~~~~~~~~~~~~~~~~~~~ arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DSPHINXBASE_EXPORTS -DPOCKETSPHINX_EXPORTS -DSPHINX_DLL -DHAVE_CONFIG_H -Ideps/sphinxbase/include -Ideps/sphinxbase/include/sphinxbase -Ideps/sphinxbase/include/android -I/usr/include/python3.7m -c deps/sphinxbase/src/libsphinxad/ad_pulse.c -o build/temp.linux-armv7l-3.7/deps/sphinxbase/src/libsphinxad/ad_pulse.o -Wno-unused-label -Wno-strict-prototypes -Wno-parentheses -Wno-unused-but-set-variable -Wno-unused-variable -Wno-unused-result -Wno-sign-compare -Wno-misleading-indentation deps/sphinxbase/src/libsphinxad/ad_pulse.c:44:10: fatal error: pulse/pulseaudio.h: No such file or directory #include <pulse/pulseaudio.h> ^~~~~~~~~~~~~~~~~~~~ compilation terminated. error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1 ---------------------------------------- ERROR: Failed building wheel for pocketsphinx Running setup.py clean for pocketsphinx Failed to build pocketsphinx — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[howardjensen]

Hi, I have had the same problem during the past week. I tried 4 more time, same problem. ‘ERROR compilation terminated.
Error : command ‘arm-Linux-gnueabilf-bcc’ failed with exit status 1

Adeept support said the problem is tied to the Speech Feature of the Mars Rover

[Tomascjek]

Hi, I have had the same problem during the past week. I tried 4 more time, same problem. ‘ERROR compilation terminated.
Error : command ‘arm-Linux-gnueabilf-bcc’ failed with exit status 1

Adeept support said the problem is tied to the Speech Feature of the Mars Rover

DITO

[howardjensen]

Hi, how is the rest of your Mars Rover progressing? Mine seems to be working pretty well. I have problems slowing it down to let the ultra sound control what to avoid. Support told me, the Python routine ‘functions.py’ at line 93 Is factory set to .7 meters. I also want to figure out how to stop the server.py from running at boot time, so I can better understand the start up process. If you examine some of the Python code, there are imbedded ‘print’ statements that are supposed to print to the ‘terminal’, what ever that means. Good luck....

…

Sent from my iPad

On Nov 11, 2020, at 12:11 PM, Tomascjek ***@***.***> wrote:  Hi, I have had the same problem during the past week. I tried 4 more time, same problem. ‘ERROR compilation terminated. Error : command ‘arm-Linux-gnueabilf-bcc’ failed with exit status 1 Adeept support said the problem is tied to the Speech Feature of the Mars Rover DITO — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

[detemp]

Just run the command:

sudo apt-get install libpulse-dev

team Adeept: I have a fix staged for the setup.py file, tested on RPI4-b and can push it into the master branch if you like.

[sbollaerts]

I tried to install pockesphinx directly with

sudo python3 -m pip install --upgrade pip setuptools wheel
sudo pip3 install --upgrade pocketsphinx

But it still causing an error. I then did

sudo apt-get install python3-pocketsphinx

I don't know if it is a valid workaround: to check if all examples work.