如何购买开发板(mk3060模组)？ about alios-things

[chunhuajiang]

已找到购买链接，淘宝搜 MiCOKit3060

[rockzhouchina]

https://item.taobao.com/item.htm?spm=a1z09.2.0.0.4db6f7af99FiSP&id=559865094527&_u=nm4sjv3cab
我刚购买

[chunhuajiang]

@rockzhouchina 我也刚买了，thanks

[yuguitao]

有跑起来的硬件组合图吗？ 可以发来参考参考

[chunhuajiang]

@yuguitao 我的板子估计今天上午到，计划到时候写一些博客 http://iot-fans.xyz 😃

[kejinlu]

昨晚我试了下 死活烧不进去

[lluwang]

@kejinlu，请问你的操作步骤是什么？

[chunhuajiang]

@kejinlu

• 烧写时加参数 VERBOSE=1 看以看到详细的烧写命令
• out/openocd.log 文件中存放了烧写程序时的log，你看里面是啥，如果提示类似 error while loading shared libraries: libhidapi-hidraw.so.0的话，是因为从 https://files.alicdn.com/tpsservice/6b3d60f77fcfeb00979bbd27c16b17e3.zip 下载的 OpenOCD的 Linux64目录下面没这个库(Win32和OSX目录下有对应的这个库)，最简单的解决办法是在系统中单独安装一遍 OpenOCD:
  $ sudo apt-get install openocd
  然后这个库就随带被安装上了

@kejinlu apt-get install libhidapi-hidraw0 （ubuntu）, 解决提示error while loading shared libraries: libhidapi-hidraw.so.0`

[oujunli]

可以做如下尝试：
1、如果是Windows，确认JTAG驱动版本，比较稳定版本是4.8。
2、进入bootloader模式下烧写试试。（进入bootloader的方式：按住boot键，按一下reset键）
@kejinlu

[kejinlu]

我jlink还没到，所以直接 miniusb串口的

按照文档点击upload 出现如下信息

[INFO-Build] Run "C:\Users\Luke.vscode\extensions\alios.alios-studio-0.4.2\bin\aos_64.exe make helloworld@mk3060 JTAG=jlink download" on c:\Users\Luke\Documents\Projects\AliOS-Things
[INFO-Build] -------------OUTPUT START-------------
[INFO-Build] Build AOS Now
[INFO-Build]
[INFO-Build] Skipping building bootloader due to "total" is not set
[INFO-Build]
[INFO-Build]
[INFO-Build]
[INFO-Build]
[INFO-Build] AOS MEMORY MAP
[INFO-Build] |=================================================================|
[INFO-Build] | MODULE | ROM | RAM |
[INFO-Build] |=================================================================|
[INFO-Build] | armv5 | 460 | 0 |
[INFO-Build] | beken | 2254 | 4382 |
[INFO-Build] | board_mk3060 | 511 | 16 |
[INFO-Build] | cli | 6108 | 124 |
[INFO-Build] | digest_algorithm | 112 | 0 |
[INFO-Build] | framework | 376 | 12 |
[INFO-Build] | hal | 172 | 12 |
[INFO-Build] | helloworld | 130 | 0 |
[INFO-Build] | kv | 2977 | 36 |
[INFO-Build] | libalicrypto | 4078 | 0 |
[INFO-Build] | libbeken | 163390 | 51833 |
[INFO-Build] | libc_nano | 18288 | 464 |
[INFO-Build] | libgcc | 6088 | 0 |
[INFO-Build] | libmbedcrypto | 3582 | 8748 |
[INFO-Build] | libmbedtls | 12067 | 0 |
[INFO-Build] | libmesh | 520 | 396 |
[INFO-Build] | log | 40 | 4 |
[INFO-Build] | net | 43434 | 3374 |
[INFO-Build] | newlib_stub | 240 | 0 |
[INFO-Build] | rhino | 23673 | 6313 |
[INFO-Build] | vcall | 6659 | 4 |
[INFO-Build] | vfs | 1819 | 1109 |
[INFO-Build] | yloop | 1311 | 24 |
[INFO-Build] | fill | 335 | 103 |
[INFO-Build] |=================================================================|
[INFO-Build] | TOTAL (bytes) | 298624 | 76954 |
[INFO-Build] |=================================================================|
[INFO-Build]
[INFO-Build] Downloading Bootloader ...
[INFO-Build]
[INFO-Build] Skipping download bootloader due to "total" is not set
[INFO-Build]
[INFO-Build]
[INFO-Build]
[INFO-Build] Downloading application to partition: 2 size: 304316 bytes...
[INFO-Build]
[INFO-Build] Download failed
[INFO-Build]
[INFO-Build] Build complete
[INFO-Build]
[INFO-Build] Making .gdbinit
[INFO-Build]
[INFO-Build] Task Complete!
[INFO-Build] -------------OUTPUT FINISHED-------------
[INFO-Device] Burn image c:\Users\Luke\Documents\Projects\AliOS-Things\out\helloworld@mk3060\binary\[email protected] on Device
[INFO-Device] Load Image File c:\Users\Luke\Documents\Projects\AliOS-Things\out\helloworld@mk3060\binary\[email protected] size 323340 bytes.
[INFO-Device] Timeout waiting device ask for transition.
[ERROR-Device] Fail to burn image c:\Users\Luke\Documents\Projects\AliOS-Things\out\helloworld@mk3060\binary\[email protected] due to Timeout waiting device ask for transition. Please make sure your board is in bootloader mode

[kejinlu]

mk3060的开发板按照你们文档以及官方文档尝试进bootloader模式（其实都不知道有没有进入），然后vscode点击那个upload按钮。出现上面的信息，看到连个问题 一个是
Skipping download bootloader due to "total" is not set 的信息，另一个就是 Please make sure your board is in bootloader mode ，都不知道是我操作不对，还是板子有问题，还是什么问题

[kejinlu]

@oujunli 1. 我仿真器还没到，就先usb串口尝试的 2. https://item.taobao.com/item.htm?spm=a1z09.2.0.0.4db6f7af99FiSP&id=559865094527&_u=nm4sjv3cab 买的mk3060 只有boot按钮，没有所谓的reset按钮，alios things 里面标的reset按钮其实对应的是板子的chip_en 按钮。所以就纠结了，mk3060官方文档说是按住boot按钮，通电 就是bootloader模式了。

[kejinlu]

@tidyjiang8 我是在windows上 usb串口的方式进行的

[kejinlu]

JLink可以download了，usb串口不行，希望官方给个说明。

[junjiec]

@kejinlu 和开发板的bootloader有关，我同事给你的gmail邮箱发了邮件注意查收

[kejinlu]

@junjiec 好的 感谢

[TestDevelopment]

F:\ALIOS\AliOS-Things-master>arm-none-eabi-gdb -x=.gdbinit -ex 'target r
emote localhost:3333' ./out/eclipse_debug/last_built.elf --tui
C:\Program Files (x86)\GNU Tools ARM Embedded\5.4 2016q3\bin\arm-none-eabi-gdb.e
xe: TUI mode is not supported

这个有知道怎么解决的吗？

[junjiec]

@TestDevelopment windows版本的gdb不支持tui