add support for BW21 about antminer-monitor

[anselal]

@HMCmin thanks for using my software.
Do you know if this BW21 has an API ?

[HMCmin]

sorry for late reply.
teoretical bw21 run on cgminer but I don't know witch version

[anselal]

You can try and add it as S9 or another model and there if it is running on cgminer and has the same api there 2 options you will face:

1. The model you will add the miner as will not work so you would have to delete your database and start from scratch
2. If it actually works you can navigate to localhost:5000/<miner_ip>/summary, localhost:5000/<miner_ip>/stats and post the jsons here so I can add it

[HMCmin]

/summary

{ "IP": "10.0.0.110", "STATUS": [ { "Code": 11, "Description": "cpuminer 2.3.2", "Msg": "Summary", "STATUS": "S", "When": 1636059211 } ], "SUMMARY": [ { "Accepted": 1655589633525809, "Best Share": 0, "Device Hardware%": 1.0, "Device Rejected%": 1.0, "Difficulty Accepted": 0.0, "Difficulty Rejected": 0.0, "Difficulty Stale": 0.0, "Discarded": 0, "Elapsed": 59273, "Found Blocks": 0, "Get Failures": 0, "Getworks": 0, "Hardware Errors": 0, "Last getwork": 1636059211, "Local Work": 0, "MHS 15m": 0.0, "MHS 1m": 0.0, "MHS 5m": 0.0, "MHS 5s": 0.0, "MHS av": 0.0, "Network Blocks": 0, "Pool Rejected%": 1.0, "Pool Stale%": 1.0, "Rejected": 101, "Remote Failures": 0, "Stale": 0, "Total MH": 0.0, "Utility": 0.0, "Work Utility": 0.0, "inputCurrent1": 30.12, "inputCurrent2": 32.23, "inputCurrent3": 32.1, "inputVolt1": 12.0, "inputVolt2": 12.0, "inputVolt3": 12.0, "outputVolt1": 5.6, "outputVolt2": 5.6, "outputVolt3": 5.6, "temper1": 0.0, "temper2": 0.0, "temper3": 0.0 } ], "id": 1 }

/stats

{ "IP": "10.0.0.110", "STATUS": [ { "Code": 14, "Description": "cpuminer 2.3.2", "Msg": "Invalid command", "STATUS": "E", "When": 1636059243 } ], "id": 1 }