2022 Vortex AC about broadlinkac2mqtt

[marcoahp]

try deleting devices from AC Freedom, and add again only until they connect to your wifi, then cancel. It works for me. You will lose AC Freedom, but this integration is much better

[PabloBrzoska]

hello,

I have the same symptoms with my AUX 18QC. Unfortunately removing the device from the AC Freedom did not help.

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
{"level":"debug","time":"2023-11-15T22:12:38Z","caller":"/app/broadlinkac2mqtt/config/config.go:47","message":"Start reading a config file"}
{"level":"error","error":"read udp 172.30.33.7:39058->192.168.20.38:80: i/o timeout","time":"2023-11-15T22:12:48Z","caller":"/app/broadlinkac2mqtt/app/webClient/client.go:43","message":"Failed to read the response"}
{"level":"error","error":"read udp 172.30.33.7:39058->192.168.20.38:80: i/o timeout","input":{"Command":101,"Payload":"RTRS5/ku2pWDRJMINe+abftpLcNwuQRDrFzWP7tTrfoIgUyn+M9BcQAyjlcMO4bJTQVwhEmjieKa4QRUNqBb3dwCwWGvEyXofhmw99HOBo0=","Mac":"ec0baec200a6"},"device":"ec0baec200a6","time":"2023-11-

Any other suggestions?

[marcoahp]

Hi Pablo, You have to remove, and add again until it’s connected to your wifi, in my case, I see it in the router, and I reserve the ip. De: PabloBrzoska ***@***.***> Enviado el: miércoles, 15 de noviembre de 2023 23:17 Para: ArtemVladimirov/broadlinkac2mqtt ***@***.***> CC: marcoahp ***@***.***>; Comment ***@***.***> Asunto: Re: [ArtemVladimirov/broadlinkac2mqtt] 2022 Vortex AC (Issue #34) hello, I have the same symptoms with my AUX 18QC. Unfortunately removing the device from the AC Freedom did not help. s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started {"level":"debug","time":"2023-11-15T22:12:38Z","caller":"/app/broadlinkac2mqtt/config/config.go:47","message":"Start reading a config file"} {"level":"error","error":"read udp 172.30.33.7:39058->192.168.20.38:80: i/o timeout","time":"2023-11-15T22:12:48Z","caller":"/app/broadlinkac2mqtt/app/webClient/client.go:43","message":"Failed to read the response"} {"level":"error","error":"read udp 172.30.33.7:39058->192.168.20.38:80: i/o timeout","input":{"Command":101,"Payload":"RTRS5/ku2pWDRJMINe+abftpLcNwuQRDrFzWP7tTrfoIgUyn+M9BcQAyjlcMO4bJTQVwhEmjieKa4QRUNqBb3dwCwWGvEyXofhmw99HOBo0=","Mac":"ec0baec200a6"},"device":"ec0baec200a6","time":"2023-11- Any other suggestions? — Reply to this email directly, view it on GitHub <#34 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AL3J4T6D2BN3YD2W3EDBVRTYEU5PBAVCNFSM6AAAAAA4WUGHBWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMJTGM2TAMZWGE> . You are receiving this because you commented. <https://github.com/notifications/beacon/AL3J4TZXJXAJPEK6Z2ZU2HDYEU5PBA5CNFSM6AAAAAA4WUGHBWWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTMCWD5S.gif> Message ID: ***@***.*** ***@***.***> >

[PabloBrzoska]

Hi marcoahp,

Yes, that's exactly what I did. AUX device responds correctly on the network.
Maybe version of my broadlink device is not supported by this integration. I'll continue my investigation :)

[PabloBrzoska]

Hi marcoahp and all,

I've tried several time connect (air conditioner deleted from acfreedom and active in local network) but no positive result so far.
Version of my broadlink module: CTTG-40X24-WIFI-AKS2 and model of broadlink chip: BL1206-P

Has anyone tried (with success) integrate this version of broadlink?

pablo

[emosenkis]

I'm having the same issue with a new ISKA (Tornado sub-brand) AC:

{"level":"error","error":"read udp 172.30.33.4:36354->192.168.86.223:80: i/o timeout","time":"2024-03-10T21:25:34Z","caller":"/app/broadlinkac2mqtt/app/webClient/client.go:43","message":"Failed to read the response"}
{"level":"error","error":"read udp 172.30.33.4:36354->192.168.86.223:80: i/o timeout","input":{"Command":101,"Payload":"RTRS5/ku2pWDRJMINe+abftpLcNwuQRDrFzWP7tTrfoIgUyn+M9BcQAyjlcMO4bJTQVwhEmjieKa4QRUNqBb3dwCwWGvEyXofhmw99HOBo0=","Mac":"e816569ab805"},"device":"e816569ab805","time":"20
24-03-10T21:25:34Z","caller":"/app/broadlinkac2mqtt/app/service/service.go:665","message":"failed to send a command"}
{"level":"error","error":"read udp 172.30.33.4:36354->192.168.86.223:80: i/o timeout","input":{"Mac":"e816569ab805"},"time":"2024-03-10T21:25:34Z","caller":"/app/broadlinkac2mqtt/app/service/service.go:139","message":"failed to send command"}
{"level":"error","error":"read udp 172.30.33.4:36354->192.168.86.223:80: i/o timeout","device":"e816569ab805","time":"2024-03-10T21:25:34Z","caller":"/app/broadlinkac2mqtt/main.go:156","message":"Failed to Auth device e816569ab805. Reconnect in 3 seconds..."}

Any suggestions for what I can do to debug this?