[bug #7309] m169 stk500 errors w/ new firmware (v1.15) about avrdude

[avrs-admin]

Colin O Flynn <c_oflynn>
Fri 18 Jun 2004 06:55:01 PM UTC

Hi,

I'm using an avr-isp with the same firmware, and the same revision of Mega169 (avr-isp and STK500 are almost exactly the same in terms of programming interface) and can not duplicate the sync problems. I do get the PAGEL and BS2 error though.

Did you set the clock on your STK500 to the same speed that you are running the AtMega169 off (either set it to the internal osc frequency, or change the fuses in the mega169 so it uses the external oscillator on the STK500).

Also can you try your STK500 on another computer, both with avrdude and AVR Studio? With my half-working STK500 I get sync errors (the programming interface or my STK500 isn't and since I've got an avr-isp I've been too lazy to fix it). If it works perfectly from AVR Studio (hopefully running on that same hardware you are using avrdude) then you know it is likely avrdude trouble.

Regards,

-Colin

[avrs-admin]

Brian Dean
Thu 15 Sep 2005 01:33:30 AM UTC

Closing ... looks like a programmer communication problem and the originator did not respond with requested additional information.