Comments (2)
After do python3 -m pip install --upgrade pip setuptools wheel
, I get below different error:
[root@ocp1 operator]# pip3 install taskcat
Collecting taskcat
Using cached taskcat-0.9.36-py3-none-any.whl (121 kB)
Requirement already satisfied: pip in /usr/local/lib/python3.8/site-packages (from taskcat) (23.0.1)
Collecting cfn-lint<1.0,>=0.13.0
Using cached cfn_lint-0.74.0-py3-none-any.whl (3.0 MB)
Collecting yattag<2.0,>=1.10.0
Using cached yattag-1.15.0.tar.gz (28 kB)
Preparing metadata (setup.py) ... done
Collecting botocore<2.0,>=1.12.21
Using cached botocore-1.29.82-py3-none-any.whl (10.5 MB)
Collecting markupsafe==2.0.1
Using cached MarkupSafe-2.0.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (30 kB)
Collecting jsonschema~=3.0
Using cached jsonschema-3.2.0-py2.py3-none-any.whl (56 kB)
Collecting docker~=4.0
Using cached docker-4.4.4-py2.py3-none-any.whl (147 kB)
Collecting dulwich~=0.19
Using cached dulwich-0.21.3-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (508 kB)
Collecting PyYAML~=5.1
Using cached PyYAML-5.4.1-cp38-cp38-manylinux1_x86_64.whl (662 kB)
Collecting dataclasses-jsonschema<2.15.2,>=2.9.0
Using cached dataclasses_jsonschema-2.15.1-py3-none-any.whl (17 kB)
Collecting boto3<2.0,>=1.9.21
Using cached boto3-1.26.82-py3-none-any.whl (134 kB)
Collecting requests>2.17.0
Using cached requests-2.28.2-py3-none-any.whl (62 kB)
Collecting pathspec==0.10.3
Using cached pathspec-0.10.3-py3-none-any.whl (29 kB)
Collecting jinja2<4.0,>=3.1.1
Using cached Jinja2-3.1.2-py3-none-any.whl (133 kB)
Requirement already satisfied: setuptools>=40.4.3 in /usr/local/lib/python3.8/site-packages (from taskcat) (67.4.0)
Collecting tabulate<1.0,>=0.8.2
Using cached tabulate-0.9.0-py3-none-any.whl (35 kB)
Collecting reprint
Using cached reprint-0.6.0-py2.py3-none-any.whl (6.0 kB)
Collecting s3transfer<0.7.0,>=0.6.0
Downloading s3transfer-0.6.0-py3-none-any.whl (79 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 79.6/79.6 kB 1.1 MB/s eta 0:00:00
Collecting jmespath<2.0.0,>=0.7.1
Downloading jmespath-1.0.1-py3-none-any.whl (20 kB)
Collecting urllib3<1.27,>=1.25.4
Downloading urllib3-1.26.14-py2.py3-none-any.whl (140 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.6/140.6 kB 1.4 MB/s eta 0:00:00
Collecting python-dateutil<3.0.0,>=2.1
Downloading python_dateutil-2.8.2-py2.py3-none-any.whl (247 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 247.7/247.7 kB 2.9 MB/s eta 0:00:00
Collecting sarif-om~=1.0.4
Downloading sarif_om-1.0.4-py3-none-any.whl (30 kB)
Collecting jsonpatch
Downloading jsonpatch-1.32-py2.py3-none-any.whl (12 kB)
Collecting aws-sam-translator>=1.59.0
Downloading aws_sam_translator-1.60.1-py3-none-any.whl (282 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 282.4/282.4 kB 1.4 MB/s eta 0:00:00
Collecting jschema-to-python~=1.2.3
Downloading jschema_to_python-1.2.3-py3-none-any.whl (10 kB)
Collecting networkx<4,>=2.4
Downloading networkx-3.0-py3-none-any.whl (2.0 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 707.7 kB/s eta 0:00:00
Collecting junit-xml~=1.9
Downloading junit_xml-1.9-py2.py3-none-any.whl (7.1 kB)
Collecting six>=1.4.0
Downloading six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting websocket-client>=0.32.0
Downloading websocket_client-1.5.1-py3-none-any.whl (55 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.9/55.9 kB 905.8 kB/s eta 0:00:00
Collecting attrs>=17.4.0
Downloading attrs-22.2.0-py3-none-any.whl (60 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.0/60.0 kB 927.3 kB/s eta 0:00:00
Collecting pyrsistent>=0.14.0
Downloading pyrsistent-0.19.3-py3-none-any.whl (57 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.5/57.5 kB 934.0 kB/s eta 0:00:00
Collecting charset-normalizer<4,>=2
Downloading charset_normalizer-3.0.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (195 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 195.4/195.4 kB 954.1 kB/s eta 0:00:00
Collecting idna<4,>=2.5
Downloading idna-3.4-py3-none-any.whl (61 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 1.1 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
Downloading certifi-2022.12.7-py3-none-any.whl (155 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 1.0 MB/s eta 0:00:00
Collecting colorama
Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting backports.shutil-get-terminal-size
Downloading backports.shutil_get_terminal_size-1.0.0-py2.py3-none-any.whl (6.5 kB)
Collecting typing-extensions~=4.4.0
Downloading typing_extensions-4.4.0-py3-none-any.whl (26 kB)
Collecting jsonpickle
Downloading jsonpickle-3.0.1-py2.py3-none-any.whl (40 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.5/40.5 kB 1.1 MB/s eta 0:00:00
Collecting pbr
Downloading pbr-5.11.1-py2.py3-none-any.whl (112 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 112.7/112.7 kB 1.1 MB/s eta 0:00:00
Collecting jsonpointer>=1.9
Downloading jsonpointer-2.3-py2.py3-none-any.whl (7.8 kB)
Building wheels for collected packages: yattag
Building wheel for yattag (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [32 lines of output]
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "/tmp/pip-install-quvb0htc/yattag_eb47825f084f4e72b387d3aa02a6d509/setup.py", line 6, in <module>
setup(
File "/usr/local/lib/python3.8/site-packages/setuptools/_distutils/core.py", line 172, in setup
ok = dist.parse_command_line()
File "/usr/local/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 475, in parse_command_line
args = self._parse_command_opts(parser, args)
File "/usr/local/lib/python3.8/site-packages/setuptools/dist.py", line 1119, in _parse_command_opts
nargs = _Distribution._parse_command_opts(self, parser, args)
File "/usr/local/lib/python3.8/site-packages/setuptools/_distutils/dist.py", line 534, in _parse_command_opts
cmd_class = self.get_command_class(command)
File "/usr/local/lib/python3.8/site-packages/setuptools/dist.py", line 966, in get_command_class
self.cmdclass[command] = cmdclass = ep.load()
File "/usr/local/lib/python3.8/site-packages/setuptools/_vendor/importlib_metadata/__init__.py", line 208, in load
module = import_module(match.group('module'))
File "/usr/local/lib/python3.8/importlib/__init__.py", line 127, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "<frozen importlib._bootstrap>", line 1014, in _gcd_import
File "<frozen importlib._bootstrap>", line 991, in _find_and_load
File "<frozen importlib._bootstrap>", line 975, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 671, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 783, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/usr/local/lib/python3.8/site-packages/wheel/bdist_wheel.py", line 28, in <module>
from .macosx_libfile import calculate_macosx_platform_tag
File "/usr/local/lib/python3.8/site-packages/wheel/macosx_libfile.py", line 43, in <module>
import ctypes
File "/usr/local/lib/python3.8/ctypes/__init__.py", line 7, in <module>
from _ctypes import Union, Structure, Array
ModuleNotFoundError: No module named '_ctypes'
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for yattag
Running setup.py clean for yattag
Failed to build yattag
Installing collected packages: yattag, charset-normalizer, backports.shutil-get-terminal-size, websocket-client, urllib3, typing-extensions, tabulate, six, PyYAML, pyrsistent, pbr, pathspec, networkx, markupsafe, jsonpointer, jsonpickle, jmespath, idna, colorama, certifi, attrs, sarif-om, requests, reprint, python-dateutil, junit-xml, jsonschema, jsonpatch, jschema-to-python, jinja2, dulwich, docker, dataclasses-jsonschema, botocore, s3transfer, boto3, aws-sam-translator, cfn-lint, taskcat
Running setup.py install for yattag ... done
DEPRECATION: yattag was installed using the legacy 'setup.py install' method, because a wheel could not be built for it. pip 23.1 will enforce this behaviour change. A possible replacement is to fix the wheel build issue reported above. Discussion can be found at https://github.com/pypa/pip/issues/8368
Successfully installed PyYAML-5.4.1 attrs-22.2.0 aws-sam-translator-1.60.1 backports.shutil-get-terminal-size-1.0.0 boto3-1.26.82 botocore-1.29.82 certifi-2022.12.7 cfn-lint-0.74.0 charset-normalizer-3.0.1 colorama-0.4.6 dataclasses-jsonschema-2.15.1 docker-4.4.4 dulwich-0.21.3 idna-3.4 jinja2-3.1.2 jmespath-1.0.1 jschema-to-python-1.2.3 jsonpatch-1.32 jsonpickle-3.0.1 jsonpointer-2.3 jsonschema-3.2.0 junit-xml-1.9 markupsafe-2.0.1 networkx-3.0 pathspec-0.10.3 pbr-5.11.1 pyrsistent-0.19.3 python-dateutil-2.8.2 reprint-0.6.0 requests-2.28.2 s3transfer-0.6.0 sarif-om-1.0.4 six-1.16.0 tabulate-0.9.0 taskcat-0.9.36 typing-extensions-4.4.0 urllib3-1.26.14 websocket-client-1.5.1 yattag-1.15.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Still not work
[root@ocp1 operator]# taskcat --version
Traceback (most recent call last):
File "/usr/local/bin/taskcat", line 4, in <module>
from taskcat._cli import main
File "/usr/local/lib/python3.8/site-packages/taskcat/__init__.py", line 4, in <module>
from ._cfn.stack import Stack # noqa: F401
File "/usr/local/lib/python3.8/site-packages/taskcat/_cfn/stack.py", line 16, in <module>
from taskcat._cfn.template import Template, tcat_template_cache
File "/usr/local/lib/python3.8/site-packages/taskcat/_cfn/template.py", line 9, in <module>
import cfnlint
File "/usr/local/lib/python3.8/site-packages/cfnlint/__init__.py", line 7, in <module>
import cfnlint.conditions
File "/usr/local/lib/python3.8/site-packages/cfnlint/conditions.py", line 10, in <module>
import cfnlint.helpers
File "/usr/local/lib/python3.8/site-packages/cfnlint/helpers.py", line 24, in <module>
from cfnlint.decode.node import dict_node, list_node, str_node
File "/usr/local/lib/python3.8/site-packages/cfnlint/decode/__init__.py", line 15, in <module>
from cfnlint.rules import Match, ParseError
File "/usr/local/lib/python3.8/site-packages/cfnlint/rules/__init__.py", line 16, in <module>
from cfnlint.template import Template
File "/usr/local/lib/python3.8/site-packages/cfnlint/template.py", line 12, in <module>
from cfnlint.graph import Graph
File "/usr/local/lib/python3.8/site-packages/cfnlint/graph.py", line 12, in <module>
import networkx
File "/usr/local/lib/python3.8/site-packages/networkx/__init__.py", line 19, in <module>
from networkx import utils
File "/usr/local/lib/python3.8/site-packages/networkx/utils/__init__.py", line 2, in <module>
from networkx.utils.decorators import *
File "/usr/local/lib/python3.8/site-packages/networkx/utils/decorators.py", line 1, in <module>
import bz2
File "/usr/local/lib/python3.8/bz2.py", line 19, in <module>
from _bz2 import BZ2Compressor, BZ2Decompressor
ModuleNotFoundError: No module named '_bz2'
from taskcat.
As an update, things goes well on redhat 8.
from taskcat.
Related Issues (20)
- Empty .taskcat_overrides.yml file causes ValidationError HOT 1
- SQS: Resource dependencies are not circular
- ValueError cannot find suitable AWS partition HOT 2
- Run taskcat tests in sequential order
- Taskcat Does Not Read Credentials From Environmental Variables
- deployment failed with latest v0.9.37
- How to pass random values for certain parameter in taskcat file HOT 1
- TaskCat failing to run on k8s with contained runtime. HOT 2
- ClientError An error occurred (IllegalLocationConstraintException) when calling the ListObjectsV2 operation: The ap-east-1 location constraint is incompatible for the region specific endpoint this request was sent to
- Pyyaml 5.4.1-6.0.0 has broken half the python eco system HOT 8
- Manual Installation of v0.9.39 is installing v0.9.38 HOT 1
- Tel Aviv AWS Region not supported HOT 2
- Taskcat test clean gives a template deleted return while template hasn't fully completed deletion HOT 4
- `taskcat lint` uses all regions defined in `.taskcat.yaml` but doesn't output the region name in case of an error or warning
- Taskcat failing when Fn::ForEach exist in the template
- Cannot blacklist AZ usw1-az2 and apne1-az3
- $[taskcat_secretsmanager_] pseudo parameter does not work
- Incorrect test name displayed in CloudFormation Stack tags deployed using taskcat test run.
- Program breaks when there is a region with the resource not supported HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from taskcat.