Comments (12)
Ok no problem. It's a common mistake.
I'll close the issue now.
from nefit-buderus-ems-bus-arduino-domoticz.
Try swapping TX and RX.
from nefit-buderus-ems-bus-arduino-domoticz.
doesn't work either, also swapping jumper doesn't change anything
from nefit-buderus-ems-bus-arduino-domoticz.
Can you tell me exactly which pins on the board you connected to which pin on the Wemos?
from nefit-buderus-ems-bus-arduino-domoticz.
first I tried like written in your manual Rx to Rx, Tx to Tx. 3,3v to 3,3v and GND to GND.
Now I swapped Rx to Tx on ESP and Tx to Rx as usual. Tried also a NodeMCU LOLIN doen't work
from nefit-buderus-ems-bus-arduino-domoticz.
Did you connect RX to D7 and TX to D8?
from nefit-buderus-ems-bus-arduino-domoticz.
I'm so sorry, that's the reason. I now see 👍
EMS Bus Connected with Rx active but Tx has been disabled (in listen only mode). Problem as always 50cm infront of the screen. Now I'm really excited to see data. I'll give you a message later.
from nefit-buderus-ems-bus-arduino-domoticz.
{"selFlowTemp":5,"selBurnPow":0,"curBurnPow":0,"pumpMod":0,"outdoorTemp":3.5,"wWCurTmp":51.9,"wWCurFlow":0,"curFlowTemp":27.2,"burnGas":"off","flameCurr":0,"heatPmp":"off","fanWork":"off","ignWork":"off","wWCirc":"off","wWHeat":"off","wWStarts":981,"wWWorkM":17319,"burnStarts":1989,"burnWorkMin":35777,"heatWorkMin":18458,"ServiceCode":"0H","ServiceCodeNumber":203} | |
---|---|
2019-11-11 09:40:48 | tapwater_active |
2019-11-11 09:40:48 | heating_active |
from nefit-buderus-ems-bus-arduino-domoticz.
Thank you again, you made my day. Sorry for making trouble. You are now also mentioned with a link on Alex Kabza's webside. I'm also talking to him because of another interface! http://www.kabza.de/MyHome/EMSbus.html
from nefit-buderus-ems-bus-arduino-domoticz.
The reason D7 and D8 are used on the Wemos instead of the normal TX and RX is because at boot the ESP sends out some debug information on TX, thereby disturbing the EMS bus.
With the pinswap function the UART is set to the alternative pins D7 and D8 after this debug stuff is sent so the EMS bus is never disturbed.
from nefit-buderus-ems-bus-arduino-domoticz.
Okay, I red it but didn't take care when connecting the ESP. Now I get data but what happenes is, that my RC310 goes on failure and is only shwoing a blinking screen. Any ideas?
from nefit-buderus-ems-bus-arduino-domoticz.
After letting it work for some time, connection to EMS-Bus ist lost and one capacitor is getting very hot.
It's C1 on the pcb. What could happened to cause this?
from nefit-buderus-ems-bus-arduino-domoticz.
Related Issues (19)
- Not an issue, just a question.... HOT 1
- Help with RC35 Moduline 400 HOT 1
- Bosch EasyControl Adapter HOT 1
- Rx Tx label HOT 2
- CRC check not working for 080019 messages (UBAMonitorSlow) HOT 1
- Connection lost with Wemos HOT 2
- How can I write values? HOT 5
- Opentherm support HOT 1
- Heating ON
- What do I connect to vref? HOT 13
- Lost connection and capacitor C1 very hot HOT 3
- Schematic for new EMS Bus Wi-Fi Gateway? HOT 1
- what changes are made in the serial library HOT 48
- For loop error (forever loop)
- Link to schema is dead. HOT 2
- conflict_with_netifserial_and_sd HOT 7
- support for ESP8266 HOT 7
- EBUS or EMS? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nefit-buderus-ems-bus-arduino-domoticz.