bigtreetech Goto Github PK

adafruit_neopixel

Neo Pixels!

adxl345

arduino_core_stm32

STM32 core support for Arduino

arduino_stm32

Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards

armbian-bootlogo

asyncelegantota

Perform OTAs for ESP8266 / ESP32 Elegantly! Uses AsyncWebServer

bigtree3dpluginsuit

Gcode model preview icon

bigtreedesignassistant

3D-Printer TFT Preview and Replace icon

bigtreetech-ez-driver

bigtreetech-gtr-v1.0

BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.

bigtreetech-kraken

bigtreetech-max31865

BIGTREETECH-MAX31865 V1.0 and V2.0

bigtreetech-mini-ups-v2.0

BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.

bigtreetech-octopus-pro

This is OCTOPUS Pro open source material

bigtreetech-octopus-v1.0

This is Octopus open source material

bigtreetech-relay-v1.2

BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.

bigtreetech-s42a-v1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

bigtreetech-s42b-v1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

bigtreetech-skr-cr6

bigtreetech-skr-e3-dip-v1.0

BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

bigtreetech-skr-e3-turbo

bigtreetech-skr-mini-e3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

bigtreetech-skr-mini-mz

bigtreetech-skr-mini-v1.1

ARM Cortex-M3 series STM32F103RCT6 chip with 32-bit CPU 72MHz. Equipped with highly modular open source firmware Marlin2.0, convenient for users DIY and secondary development, exempt from the worries of the core code;

bigtreetech-skr-pro-v1.1

Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high performance 3D printer master board with STM32F407ZGT6 as the core controller, BIGTREETECH-SKR-PRO-V1.1.

bigtreetech-skr-v1.1

32bit board with LPC1768, support marlin2.0 and smoothieware

bigtreetech-skr-v1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

bigtreetech-st820-v1.0

Supply voltage from 7 V to 45 V.Output current up to 1.5 A rms for each motor phase.Stepper motor driving with a microstepping resolution up to 1/256th of step

bigtreetech-stepper-motor-driver

bigtreetech-tft2.8