Comments (27)
Hi, change in add-on configuration device_config from 009 to 104.
{"104":{"t_work_mode":["fan only","heat","cool","dry","auto"],"t_fan_speed":{"0":"auto","5":"low","6":"middle low","7":"medium","8":"middle high","9":"high"},"t_swing_angle":{"0":"swing","2":"bottom 1/6 ","3":"bottom 2/6","4":"bottom 3/6","5":"top 4/6","6":"top 5/6","7":"top 6/6"}}}
from connectlife-api-connector.
Thanks but nothing changed.
I have also restarted MQTT, then the add-on
from connectlife-api-connector.
Try:
{"104":{"t_work_mode":["fan only","heat","cool","dry","auto"],"t_fan_speed":{"0":"auto","5":"super low","6":"low","7":"medium","8":"high","9":"super high"},"t_swing_direction":["straight","right","both sides","swing","left"],"t_swing_angle":{"0":"swing","2":"bottom 1/6 ","3":"bottom 2/6","4":"bottom 3/6","5":"top 4/6","6":"top 5/6","7":"top 6/6"}}}
from connectlife-api-connector.
YUP, with that I have them all! But works only up and down, may I delete the not useful modes?
from connectlife-api-connector.
Btw it seems like your dive do not support t_swing_direction / t_swing_angle. It has probably one dimensional swing controlled by "t_up_down". Can you paste here device state please?
from connectlife-api-connector.
You need to have at least one t_swing_direction mode. I will try to fix it in v2.1.1
from connectlife-api-connector.
Try:
{"104":{"t_work_mode":["fan only","heat","cool","dry","auto"],"t_fan_speed":{"0":"auto","5":"super low","6":"low","7":"medium","8":"high","9":"super high"},"t_swing_direction":["-"],"t_swing_angle":{"0":"swing","2":"bottom 1/6 ","3":"bottom 2/6","4":"bottom 3/6","5":"top 4/6","6":"top 5/6","7":"top 6/6"}}}
from connectlife-api-connector.
This?
[{"wifiId":"blabla","deviceId":"blabla","puid":"pu000098650051000200030003000000f7f617d8c0f","deviceNickName":"Split corridoio","deviceFeatureCode":"104","deviceFeatureName":"104\u51b7\u6696\u8282\u80fd\u65e0\u529f\u7387","deviceTypeCode":"009","deviceTypeName":"","bindTime":1695327645349,"role":1,"roomId":2818830,"roomName":"default_room","statusList":{"t_sleep":"0","t_power":"0","t_work_mode":"0","t_fan_speed":"0","t_fan_speed_s":"0","t_fan_mute":"0","t_super":"0","t_eco":"0","t_temp":"26","t_temp_type":"0","t_up_down":"0","t_swing_follow":"0","t_swing_direction":"0","t_swing_angle":"0","t_fanspeedcv":"0","t_tms":"0","t_temp_compensate":"10","f_humidity":"128","f_temp_in":"23","f_electricity":"0","f_votage":"0","f_e_intemp":"0","f_e_incoiltemp":"0","f_e_inhumidity":"0","f_e_infanmotor":"0","f_e_arkgrille":"0","f_e_invzero":"0","f_e_incom":"0","f_e_indisplay":"0","f_e_inkeys":"0","f_e_inwifi":"0","f_e_inele":"0","f_e_ineeprom":"0","f_e_outeeprom":"0","f_e_outcoiltemp":"0","f_e_outgastemp":"0","f_e_outtemp":"0","f_e_waterfull":"0","f_e_upmachine":"0","f_e_dwmachine":"0","f_e_over_cold":"0","f_e_over_hot":"0","f_e_push":"0","t_demand_response":"0","t_dal":"0","t_talr":"0","f-filter":"0","f_ecm":"1"},"useTime":1695327645327,"offlineState":1,"seq":0,"createTime":0},
from connectlife-api-connector.
Try:
{"104":{"t_work_mode":["fan only","heat","cool","dry","auto"],"t_fan_speed":{"0":"auto","5":"super low","6":"low","7":"medium","8":"high","9":"super high"},"t_swing_direction":["-"],"t_swing_angle":{"0":"swing","2":"bottom 1/6 ","3":"bottom 2/6","4":"bottom 3/6","5":"top 4/6","6":"top 5/6","7":"top 6/6"}}}
nope 😑
from connectlife-api-connector.
But does your 009 104 correspond to the aeh-wgh2 wifi module?
Hi, when I was in 2.0.0 swing mode was working, now in 2.1.0 it does no more work.
here is device config: {"009":{"t_work_mode":["fan only","heat","cool","dry","auto"],"t_fan_speed":{"0":"auto","5":"low","6":"middle low","7":"medium","8":"middle high","9":"high"},"t_swing_angle":{"0":"swing","2":"bottom 1/6 ","3":"bottom 2/6","4":"bottom 3/6","5":"top 4/6","6":"top 5/6","7":"top 6/6"}}}
Already deleted, it add-on compile the same. Already deleted prevois MQTT devices
MQTT discovery give me this:
name: Split corridoio unique_id: pu000098650051000200030003000000f7f617d8c0f modes:
fan_only
heat
cool
dry
auto
'off'
fan_modes:auto
super_low
low
medium
high
super_high
swing_modes: []
payload_on: '1'
payload_off: '0'
power_command_topic: pu000098650051000200030003000000f7f617d8c0f/ac/power/set
mode_command_topic: pu000098650051000200030003000000f7f617d8c0f/ac/mode/set
mode_state_topic: pu000098650051000200030003000000f7f617d8c0f/ac/mode/get
temperature_command_topic: pu000098650051000200030003000000f7f617d8c0f/ac/temperature/set
temperature_state_topic: pu000098650051000200030003000000f7f617d8c0f/ac/temperature/get
current_temperature_topic: pu000098650051000200030003000000f7f617d8c0f/ac/current-temperature/get
json_attributes_topic: pu000098650051000200030003000000f7f617d8c0f/ac/attributes/get
precision: 0.5
max_temp: 32
min_temp: 16
temp_step: 1
device:
identifiers:
- pu000098650051000200030003000000f7f617d8c0f
manufacturer: Connectlife
model: 009-104
fan_mode_command_topic: pu000098650051000200030003000000f7f617d8c0f/ac/fan/set
fan_mode_state_topic: pu000098650051000200030003000000f7f617d8c0f/ac/fan/get
platform: mqttAnd here is my control card:
How may I get back swing mode? Thanks!
from connectlife-api-connector.
But does your 009 104 correspond to the aeh-wgh2 wifi module?
Nope, mine is AEH-W4G2
from connectlife-api-connector.
To make a dump of your device configuration:
- Go to HOME_ASSISTANT/developer-tools/state
- Find your AC device
![image](https://private-user-images.githubusercontent.com/1711312/308127112-41a7642e-d3bf-4ae9-bd11-4918174b1b50.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.rqEAs6EzFKsIqFXDsoy6eyP9hyBgHzZAmyXZq9sLFkw)
hvac_modes: fan_only, heat, cool, dry, auto, off
min_temp: 16
max_temp: 32
[ ... ]
t_talr: 0
f-filter: 0
f_ecm: 1
friendly_name: Klimatyzator Klimatyzator
supported_features: 41
- Change swing mode.
- Wait at least 1 minute.
- Go to step 3. unitl you've walked through all swing options.
- Paste (or attach in file) here the result.
I will make adjustments if I will have this data for your devices.
from connectlife-api-connector.
But does your 009 104 correspond to the aeh-wgh2 wifi module?
Nope, mine is AEH-W4G2
Sorry for my typing error, yes mine is like yours except that I can't turn them on and I don't understand why. Have you set anything in particular?
from connectlife-api-connector.
To make a dump of your device configuration:
- Go to HOME_ASSISTANT/developer-tools/state
- Find your AC device
3. Copy all attributes, for case from my screenshot it will be:
hvac_modes: fan_only, heat, cool, dry, auto, off min_temp: 16 max_temp: 32 [ ... ] t_talr: 0 f-filter: 0 f_ecm: 1 friendly_name: Klimatyzator Klimatyzator supported_features: 41
- Change swing mode.
- Wait at least 1 minute.
- Go to step 3. unitl you've walked through all swing options.
- Paste (or attach in file) here the result.
I will make adjustments if I will have this data for your devices.
from connectlife-api-connector.
Please read carefully full instruction I wrote.
from connectlife-api-connector.
Here are mine.
None of them make swing works, only from official app.
Each selection goes back to --swing after about one minute.
swings.txt
TY lots!
from connectlife-api-connector.
I was unclear, step 5. should be:
Change swing mode in official app.
The point is to discover all possible:
t_swing_direction: 0
t_swing_angle: 0
values.
from connectlife-api-connector.
I was unclear, step 5. should be: Change swing mode in official app.
The point is to discover all possible: t_swing_direction: 0 t_swing_angle: 0
values.
In this case it is super easy, I have only one swing mode:
hvac_modes: fan_only, heat, cool, dry, auto, off
min_temp: 16
max_temp: 32
target_temp_step: 1
fan_modes: auto, super_low, low, medium, high, super_high
swing_modes: - - swing, - - bottom 1/6 , - - bottom 2/6, - - bottom 3/6, - - top 4/6, - - top 5/6, - - top 6/6
current_temperature: 21
temperature: 23
fan_mode: super_low
swing_mode: - - swing
t_sleep: 0
t_power: 1
t_work_mode: 0
t_fan_speed: 5
t_fan_speed_s: 5
t_fan_mute: 0
t_super: 0
t_eco: 0
t_temp: 23
t_temp_type: 0
t_up_down: 1
t_swing_follow: 0
t_swing_direction: 0
t_swing_angle: 0
t_fanspeedcv: 0
t_tms: 0
t_temp_compensate: 10
f_humidity: 128
f_temp_in: 21
f_electricity: 0
f_votage: 0
f_e_intemp: 0
f_e_incoiltemp: 0
f_e_inhumidity: 0
f_e_infanmotor: 0
f_e_arkgrille: 0
f_e_invzero: 0
f_e_incom: 0
f_e_indisplay: 0
f_e_inkeys: 0
f_e_inwifi: 0
f_e_inele: 0
f_e_ineeprom: 0
f_e_outeeprom: 0
f_e_outcoiltemp: 0
f_e_outgastemp: 0
f_e_outtemp: 0
f_e_waterfull: 0
f_e_upmachine: 0
f_e_dwmachine: 0
f_e_over_cold: 0
f_e_over_hot: 0
f_e_push: 0
t_demand_response: 0
t_dal: 0
t_talr: 0
f-filter: 0
f_ecm: 1
icon: mdi:air-conditioner
friendly_name: Split corridoio
supported_features: 425
from connectlife-api-connector.
I was unclear, step 5. should be: Change swing mode in official app.
The point is to discover all possible: t_swing_direction: 0 t_swing_angle: 0
values.
this is mine with active oscillation from connectlife app
hvac_modes:
- fan_only
- heat
- cool
- dry
- auto
- "off"
min_temp: 16
max_temp: 32
target_temp_step: 1
fan_modes: - auto
- super_low
- low
- medium
- high
- super_high
current_temperature: 23
temperature: 30
fan_mode: auto
t_sleep: "0"
t_power: "1"
t_work_mode: "1"
t_fan_speed: "0"
t_fan_speed_s: "0"
t_fan_mute: "0"
t_super: "0"
t_eco: "0"
t_temp: "30"
t_temp_type: "0"
t_up_down: "0"
t_swing_follow: "0"
t_swing_direction: "0"
t_swing_angle: "0"
t_fanspeedcv: "0"
t_tms: "0"
t_temp_compensate: "11"
f_humidity: "128"
f_temp_in: "23"
f_electricity: "0"
f_votage: "0"
f_e_intemp: "0"
f_e_incoiltemp: "0"
f_e_inhumidity: "0"
f_e_infanmotor: "0"
f_e_arkgrille: "0"
f_e_invzero: "0"
f_e_incom: "0"
f_e_indisplay: "0"
f_e_inkeys: "0"
f_e_inwifi: "0"
f_e_inele: "0"
f_e_ineeprom: "0"
f_e_outeeprom: "0"
f_e_outcoiltemp: "0"
f_e_outgastemp: "0"
f_e_outtemp: "0"
f_e_waterfull: "0"
f_e_upmachine: "0"
f_e_dwmachine: "0"
f_e_over_cold: "0"
f_e_over_hot: "0"
f_e_push: "0"
t_demand_response: "0"
t_dal: "0"
t_talr: "0"
f-filter: "0"
f_ecm: "0"
friendly_name: 192.168.1.245 Split Soggiorno
supported_features: 393
from what I noticed for me the t_up_down is the one that varies from 0 to 1 where 0 means active and 1 is fixed
from connectlife-api-connector.
I can see my devices in addon LOG, but I can not find any in HOME_ASSISTANT/developer-tools/state
What did I miss?
from connectlife-api-connector.
Hi Bilan, do you have some news about it? Thanks
from connectlife-api-connector.
I've got the same thing, t_up_down
instead of t_swing_direction
. I tried this but it didn't work "t_up_down":{"0":"vertical","1":"off"}
My model is HAWJ9KR.
Log:
hvac_modes:
- fan_only
- heat
- cool
- dry
- auto
- "off"
min_temp: 16
max_temp: 32
target_temp_step: 1
fan_modes:
- auto
- super_low
- low
- medium
- high
- super_high
current_temperature: 24
temperature: 26
fan_mode: auto
t_work_mode: "0"
t_power: "1"
t_temp: "26"
t_temp_type: "0"
t_fan_speed: "0"
t_fan_speed_s: "0"
t_up_down: "0"
t_sleep: "0"
t_eco: "0"
t_fan_mute: "0"
t_super: "0"
f_temp_in: "24"
f_e_push: "0"
f_e_intemp: "0"
f_e_incoiltemp: "0"
f_e_inhumidity: "0"
f_e_infanmotor: "0"
f_e_arkgrille: "0"
f_e_invzero: "0"
f_e_incom: "0"
f_e_indisplay: "0"
f_e_inkeys: "0"
f_e_inwifi: "0"
f_e_inele: "0"
f_e_ineeprom: "0"
f_e_outeeprom: "0"
f_e_outcoiltemp: "0"
f_e_outgastemp: "0"
f_e_outtemp: "0"
daily_energy_kwh: 0
friendly_name: Hisense air conditioner
supported_features: 393
from connectlife-api-connector.
Swing mode - straight still not working. Thanks
from connectlife-api-connector.
I've got the same thing,
t_up_down
instead oft_swing_direction
.
I too have a ConnectLife mini split that only has "t_up_down" for vertical swing. The unit also has horizontal swing available from the handheld remote (but not from the app). Is there any way to add either the vertical or horizontal swing into HA?
Thanks
from connectlife-api-connector.
even with the new update you can see the entities but they don't work with Connectlife 009-104 solutions?
Thank you
from connectlife-api-connector.
Any update?
My swing modes replies to
t_up_down (0, straight, 1 swing)
Thank you
from connectlife-api-connector.
Any updates on this? I have a 009-104 and no swing modes also.. Should it show up as a drop-down box?
from connectlife-api-connector.
Related Issues (20)
- Argument #1 ($host) must be of type string, null given HOT 5
- Getting error when trying to install in HA HOT 2
- My air conditioner is not visible HOT 15
- [Feature request] AC unit sleep (night) regime
- Eco mode switch via gui
- 009-104 da Connectlife HOT 6
- Running on raspberrypi and using homebridge. HOT 1
- Any option not to change existing defaults on power on? HOT 1
- How to change values for t_work_mode?
- Cant connect mqtt and Connectlife HOT 4
- How to control eco/turbo
- Internal server error HOT 2
- Unable to control one out of two AC HOT 1
- Production.INFO: Skipping device with unknown type code: HOT 2
- I have a problem with api permissions HOT 2
- GET Infos from AC works, SET Infos doesnt HOT 1
- Other devices? HOT 1
- Unable to start service base-addon-banner
- newbie question... HOT 2
- AC Temperature always set to 24 degrees
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from connectlife-api-connector.