python mtk stage error about mtkclient

[bkerler]

Not needed. Will be fixed in a few min

[bkerler]

fixed with commit 53f873a

[trancullong]

fixed with commit 53f873a

python mtk stage
python stage2 rpmb
.Port - Device detected :)
Preloader - CPU: MT6765(Helio P35/G35)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0x25
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - Disabling Watchdog...
Preloader - HW code: 0x766
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - ME_ID: 4FD38FC3D325E9352E9387CF1050E00C
Preloader - SOC_ID: 94FD535E13F3BDA8F51960A06671C0863DF00DD61777B264E4511893086980FF
Main - Uploading stage 1
PLTools - Loading payload from C:\Dongle\PayLoads\MtkClientDebug\ref\mtkclient\payloads\generic_stage1_payload.bin, 0x3ec bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Dongle\PayLoads\MtkClientDebug\ref\mtkclient\payloads\generic_stage1_payload.bin
Main - Successfully uploaded stage 1, sending stage 2
Main - Done sending stage2, size 0x4000.
Main - Done jumping stage2 at 00201000
Main - Successfully loaded stage2
Stage2 - Reading rpmb...
Progress: |██------------------------------------------------| 3.3% Complete, Sector:0x421500

Done - thanks you so much