Add phase data to integration about home_assistant_custom_envoy

[HA-TB303]

Yup, works thanks!

[hydro86]

Hi I can contribute with 50-100USD to motivate the Dev to get this Individual Phase measurment with the version 7.xx of firmware

[posixx]

You can use my fork: https://github.com/posixx/home_assistant_custom_envoy

[hydro86]

Hi, Thank you for your message. I've successfully added your custom fork to HA But I'm failing to add this integration.. What should I put in the Host field at the login prompt? The IP of the Envoy? The name of the HA server? Waiting your answer Best regards Damien Le mar. 27 déc. 2022 à 10:35, posixx ***@***.***> a écrit :

…

You can use my fork: https://github.com/posixx/home_assistant_custom_envoy — Reply to this email directly, view it on GitHub <#36 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALJR677AWJLNYQKS7BLG3L3WPKZ45ANCNFSM6AAAAAAS6YFWNI> . You are receiving this because you commented.Message ID: ***@***.***>

[posixx]

I only have D5 firmware to test. The host field needs IP-adres of envoy. FOr me (D5) i only add the serial of envoy and check "3 Phase system". In case of D7 firmware i think you need to insert enlighten username + password and check "use enlighten" as well.

[HA-TB303]

Hi, I just successfully added your repo and installed the addon.

It works flawlessly!

Sadly I also found out that my installer did a really poor job connecting my panels over 2 roof portions. 1 is on south, the other one south-west. I have extreme production differences on L1, L2 and L3.

The invoice has not been paid yet, so I have asked them to look into it.

Since I am in Belgium, this is quit critical, since we have to consume as much as possible of the energy produced.

[hydro86]

Hi, thanks for your reply. Ok with the IP of my Envoy I manage to prompt but it gives me a message that the Enphase Envoy is already configured since I've previously integrated it with the for of briancmpbll <https://github.com/briancmpbll> enlighten username + password and check "use enlighten" is accepted and also just simply envoy as user. [image: image.png] Do you thing I should remove the previous integration and retry to add your? I'm just scared to loose all the jobs I made earlier in HA. Le mar. 27 déc. 2022 à 11:58, posixx ***@***.***> a écrit :

…

I only have D5 firmware to test. The host field needs IP-adres of envoy. FOr me (D5) i only add the serial of envoy and check "3 Phase system". In case of D7 firmware i think you need to insert enlighten username + password and check "use enlighten" as well. — Reply to this email directly, view it on GitHub <#36 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALJR673DOA3VA74K7HXQEGLWPLDUJANCNFSM6AAAAAAS6YFWNI> . You are receiving this because you commented.Message ID: ***@***.***>

[posixx]

Ofcourse you need to first remove existing integrations. Nothing is lost; sensor naming is the same as orginal integration just a lot of sensors are added.

[hydro86]

THANK YOU BOSS!!!! IT WORKS If you have a paypal account I will be happy to contribute to your work. This is my Christmas present in HA :-) [image: image.png] [image: image.png] Le mar. 27 déc. 2022 à 12:10, posixx ***@***.***> a écrit :

…

Ofcourse you need to first remove existing integrations. Nothing is lost; sensor naming is the same as orginal integration just a lot of sensors are added. — Reply to this email directly, view it on GitHub <#36 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALJR677BRE3QQR4ZOYIV2G3WPLFCPANCNFSM6AAAAAAS6YFWNI> . You are receiving this because you commented.Message ID: ***@***.***>

[hydro86]

[posixx]

i decided to remove the grid import/export functionality created by @gmcmicken as these sensors are non-static / loose values when restarting HA. Also my DSMR meter is reporting actual returned energy. I think it's best to remove intergration, update using HACS and add it again to remove the 2 grid sensors.

[gmcmicken]

i decided to remove the grid import/export functionality created by @gmcmicken as these sensors are non-static / loose values when restarting HA. Also my DSMR meter is reporting actual returned energy. I think it's best to remove intergration, update using HACS and add it again to remove the 2 grid sensors.

Yes grid import and export calculations shouldn't be done inside thev refresh API call. It should be done as a new sensor type inside sensor.py, similar to how the battery one is implemented.

[posixx]

I will see for some time how / if my system is reporting export power. It will take some months as my average power consumption is about 9 kWh... Needs to be summertime in order to produce that amount of energy:-) I have opened a ticket with github to have my fork detached from brian's so if there are any problems please open an issue on my branch as soon as it is detached.

[briancmpbll]

Hi @posixx, I took a look at your fork and I'd like to merge in your changes to add phase information. It would also be great for the integration to work for D5 as well as 7. Would you be able to put together a PR into this repo?

I'm in the US and only have a two-phase system, so I'd need to test with your fork to make sure everything works for me as well.

[posixx]

@briancmpbll i will move to your branch. Can you add me as contributor? Or what to i need to do? I will then go forward and add my changes to this repository

[briancmpbll]

@posixx You can fork this repo from the main branch, make your changes, and then put up a PR.

[catsmanac]

@posixx now has PR #97 that solves this one

[HA-TB303]

At the advice from @posixx I changed from his repo to this one, reinstalled the integration and now phase data is missing.

Am I missing something?

[catsmanac]

See #104 , make sure to pull Main and not version 011 which is older. In HACS do a redownload, and use pulldown for select version. (and maybe flip the switch to show beta versions)

[posixx]

New release v0.0.12 contains the new phase sensors.