Cant able to boot about pie-device-brobwind-rpi3

[brobwind]

Uses "sudo OUT=${OUT} device/brobwind/rpi3/boot/create_partition_table.sh /dev/mmcblk0" or "sudo -E device/brobwind/rpi3/boot/create_partition_table.sh /dev/mmcblk0" command

[skand24]

Hi Team,

Thanks for the support and quick response.
Happy to say, we could able to boot it and faster with class 10 32GB memory card.

Earlier we used class 4, 16GB memory card, may be slow read write it might work slow.

Also, create partition table script did not work is due to out directory is not echo in terminal. We figured out and execute source/envsetup.sh and lunch after that out dir set to terminal.
Further we ran the partition script it worked fine.

But our computer not detecting adb devices and we don't the reason. Even in the developer setting we enabled usb debugging as well but still not detected.

Instead we connected over adb connect with IP address.

Note:
The power is given to raspberry from computer and expected to detect the adb device.
Team please help us to fixing this issue

[brobwind]

The micro USB port is only for power supply not for USB function.