CANAlyze support about candlelight_fw

[fenugrec]

Maybe, but only if it uses the same pin assignments as other F042-based hardware that is already supported here. You would have to check the schematics, and verify against
https://github.com/candle-usb/candleLight_fw/blob/master/include/config.h for the LED pins and
https://github.com/candle-usb/candleLight_fw/blob/master/src/can.c#L29 for the CAN pins.

[HubertD]

CAN is on PB8/PB9 and LEDs are on PB0/PB1.
Looks like canalyze should be compatible with the cantact, which is supported by our firmware.

[brandonros]

Looks like canalyze should be compatible with the cantact, which is supported by our firmware.

For super mega clarity, does this mean that if I put CANAlyze in DFU mode, flash candlight-fw, it would be work out of the box with no changes?

[HubertD]

won't give you a guarantee, but I think so.
use the cantact flavor.

would be glad to hear about the outcome.

[brandonros]

I will test right now and if it works, I will make a PR to update the README that CANAlyze is supported

Question:

Is this the latest release or are you able to upload a more recent compiled binary?

[brandonros]

More recent firmware for other people: #32 (comment)

[fenugrec]

Yes, we could / should tag a new release. Starting a new issue for that.

[brandonros]

CAN is on PB8/PB9 and LEDs are on PB0/PB1.
Looks like canalyze should be compatible with the cantact, which is supported by our firmware.

@fenugrec can you double check I got the LED pins right first?