logcheck on multiple bands about logxchecker

[ciorceri]

Hi Ozzy.

Related with 'field is present multiple times error', I can see that you have concatenated the 50,144 and 432 bands logs in a single file.
The EDI file format states that each log per band should be in individual file.
I did the split of the log in 3 different files:

$ python3 logXchecker.py -slc ./GOBRIS/1_50mhz.edi -r ./GOBRIS/rules_config.txt
logXchecker - v1.3
Checking log : ./GOBRIS/1_50mhz.edi
No error found

$ python3 logXchecker.py -slc ./GOBRIS/2_144mhz.edi -r ./GOBRIS/rules_config.txt
logXchecker - v1.3
Checking log : ./GOBRIS/2_144mhz.edi
No error found

$ python3 logXchecker.py -slc ./GOBRIS/3_432mhz.edi -r ./GOBRIS/rules_config.txt
logXchecker - v1.3
Checking log : ./GOBRIS/3_432mhz.edi
No error found

As you can see the logs are good and pass the checks.

Related with:

Line 52 : <- Qso line is too short

In the QSOs part of the log you probably have left some empty lines. I will throw that error or all QSO lines that have less than 40 characters. You can ignore those errors if this is your case (empty lines).

Thanks and 73