Unexpected error -22 (expected -17), nlerror, cmd 0, seq 1461249716: Invalid argument about authsae

[chunyeow]

What hardware you use? Which driver?
On Apr 21, 2016 10:58 PM, "crazy4chrissi" [email protected] wrote:

I get this error when I join the mesh with the second node:

Unexpected error -22 (expected -17)

I guess this is a NLE_MSGTYPE_NOSUPPORT from libnl? How can I find out
what the msgtype is that is not supported?

I also see this error:

joining mesh MESH2 on freq 2462, mode 0
nlerror, cmd 0, seq 1461249716: Invalid argument

The nodes see each other in "iw mesh0 station dump", but they can't
communicate over IP (no ping, Destination Host Unreachable) and "iw mesh0
mpath dump" ouputs zero MAC address as next hop:

DEST ADDR NEXT HOP IFACE SN METRIC QLEN EXPTIME DTIM DRET FLAGS
7c:dd:90:XX:XX:XX 00:00:00:00:00:00 mesh0 0 0 0 0 1600 4 0x0

I tried on Arch Linux and Ubuntu Linux.

Any ideas? Is authsae ready to be used for 802.11s encryption at all under
Linux? I know the readme says it isn't, but the readme also hasn't been
updated for years, so I though I'd give it a try...

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub
#34

[crazy4chrissi]

This is lsusb's output:

Bus 001 Device 005: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter

An open mesh works fine with these adapters.

[chunyeow]

Load the driver with nohwcrypt=1 and make sure the following patch is
applied:
http://www.spinics.net/lists/linux-wireless/msg150016.html

---

Chun-Yeow

On Thu, Apr 21, 2016 at 11:01 PM, crazy4chrissi [email protected]
wrote:

This is lsusb's output:

Bus 001 Device 005: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter

An open mesh works fine with these adapters.

—
You are receiving this because you commented.
Reply to this email directly or view it on GitHub
#34 (comment)

[crazy4chrissi]

Thanks for the quick reply, I will try it.

[crazy4chrissi]

Thanks a lot. I patched the rt2800usb module and loaded it with nohwcrypt=1 on both the Ubuntu and Arch system and now it works. :)