allow Conbee zigbee USB stick in start.sh about ct-smart-home

[schwallj]

I might have a similar problem, but I'm using a Raspbee II. The hardware is (presumably) being found:

$ ls -l /dev/serial0
lrwxrwxrwx 1 root root 7 Feb  8 22:23 /dev/serial0 -> ttyAMA0

Using the deCONZ app, it is shown and detected as a coordinator.

Following the hints about adding to the configuration.yaml (see https://www.zigbee2mqtt.io/information/supported_adapters.html) did not solve the problem either:

serial:
adapter: deconz
port: /dev/ttyAMA0

The above hint about replacing the vendor ID does not lead to detection of the RaspBee II either and the container for zigbee2mqtt does not start.

I assume that this is not the best place to ask for help, but at the moment it's the only one I can find.

[medienexpedition]

First thank you for the hint about how to pass the adapter detection!

I ran into the same problem when I first tried to start the amart home system with my new conbee stick. The problem in my case was that I connected already to the stick using the deconz software when I tried to get my smart home to work.