Comments (22)
dan1-de
commented on July 18, 2024
Hi @Qlink84,
is this the only issue ?
Are the relais working with iobroker ?
To check the output of your NET-PwCtrl ADV could you please send me the output of the following shell command:
netcat -vv -l -p 2078 -u
You have to replace 2078 with the port which is shown in the anel webinterface here:
After you have entered the command the computer is listening on udp broadcast traffic. If you change now one of the inputs/outputs of the anel device, you should recieve a message in the command line.
Please send me this message and I can check why the sensor data is not displayed in iobroker.
In addition would it be helpful to have the iobroker log of the adapter with log level debug.
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
In addition it would be sensible to update to the latest firmware 7.0.
You can download the firmware from here:
https://de.anel.eu/index.htm?src=/support/support.htm
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
Hi dan1,
no that's not the only issue.
relais were only half working (see details here: https://forum.iobroker.net/topic/59416/bool-dp-wird-mit-0-1-ausgelesen-wie-in-blockly-ansteuern
long story short:
turn relais off with 0 was working, turn relais on with 1 wasn't working
however, now after i have upgraded to firmware 7.1 neither turn off with 0/false nor turn on with 1/true is working
here's netcat output:
Connection received on 192.168.30.7 75 NET-PwrCtrl:NET-CONTROL :192.168.30.7:255.255.255.0:192.168.30.254:0.4.163.20 .3.118:Modem,1:Firewall,1:Unifi Switch,1:frei,1:Raspimatic,1:Weatherman,1:Sonos, 1:Dayton,0:0:80:IO.1,0,0:IO.2,0,0:IO.3,0,0:IO.4,0,0:IO.5,0,0:IO.6,0,0:IO.7,0,0:I O.8,0,0:24.7▒C:NET-PWRCTRL_07.1:a:n:xor:
here's debug output after some testing:
`
anelhut.0 | 2022-11-01 16:41:24.007 | info | state anelhut.0.Technikraum.relais.8.Status changed: 0 (ack = true)
anelhut.0 | 2022-11-01 16:40:33.817 | info | state anelhut.0.Technikraum.relais.8.Status changed: 0 (ack = true)
anelhut.0 | 2022-11-01 16:40:15.551 | error | Decode Message Error: NoPass
anelhut.0 | 2022-11-01 16:40:15.551 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :NoPass:Err
anelhut.0 | 2022-11-01 16:40:15.551 | error | Decode Message Error: NoPass
anelhut.0 | 2022-11-01 16:40:15.551 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :NoPass:Err
anelhut.0 | 2022-11-01 16:40:15.432 | info | Command sent successfully
anelhut.0 | 2022-11-01 16:40:15.431 | debug | Password encryption disabled
anelhut.0 | 2022-11-01 16:40:15.429 | debug | Switching Relais Nr. 8 with newState 0 and command Sw_off8
anelhut.0 | 2022-11-01 16:40:15.429 | info | Relais switch command
anelhut.0 | 2022-11-01 16:40:15.428 | info | state anelhut.0.Technikraum.relais.8.Status changed: false (ack = false)-> changed by user
anelhut.0 | 2022-11-01 16:40:15.428 | info | state anelhut.0.Technikraum.relais.8.Status changed: false (ack = false)
anelhut.0 | 2022-11-01 16:37:53.397 | info | state anelhut.0.Technikraum.relais.8.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.395 | info | State value to set for "anelhut.0.Technikraum.relais.8.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.372 | info | state anelhut.0.Technikraum.relais.7.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.369 | info | state anelhut.0.Technikraum.relais.6.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.368 | info | state anelhut.0.Technikraum.relais.5.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.368 | info | state anelhut.0.Technikraum.relais.4.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.367 | info | state anelhut.0.Technikraum.relais.3.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.366 | info | state anelhut.0.Technikraum.relais.2.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.366 | info | state anelhut.0.Technikraum.relais.1.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.365 | info | state anelhut.0.Technikraum.relais.8.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.365 | info | state anelhut.0.Technikraum.relais.7.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.364 | info | state anelhut.0.Technikraum.relais.6.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.363 | info | state anelhut.0.Technikraum.relais.5.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.363 | info | state anelhut.0.Technikraum.relais.4.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.362 | info | state anelhut.0.Technikraum.relais.3.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.361 | info | state anelhut.0.Technikraum.relais.2.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.360 | info | state anelhut.0.Technikraum.relais.1.Status changed: 1 (ack = true)
anelhut.0 | 2022-11-01 16:37:53.353 | info | State value to set for "anelhut.0.Technikraum.relais.7.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.349 | info | State value to set for "anelhut.0.Technikraum.relais.6.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.347 | info | State value to set for "anelhut.0.Technikraum.relais.5.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.347 | info | State value to set for "anelhut.0.Technikraum.relais.4.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.347 | info | State value to set for "anelhut.0.Technikraum.relais.3.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.346 | info | State value to set for "anelhut.0.Technikraum.relais.2.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.346 | info | State value to set for "anelhut.0.Technikraum.relais.1.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.346 | info | State value to set for "anelhut.0.Technikraum.relais.8.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.346 | info | State value to set for "anelhut.0.Technikraum.relais.7.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.345 | info | State value to set for "anelhut.0.Technikraum.relais.6.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.345 | info | State value to set for "anelhut.0.Technikraum.relais.5.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.345 | info | State value to set for "anelhut.0.Technikraum.relais.4.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.345 | info | State value to set for "anelhut.0.Technikraum.relais.3.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.345 | info | State value to set for "anelhut.0.Technikraum.relais.2.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.344 | info | State value to set for "anelhut.0.Technikraum.relais.1.Status" has to be type "boolean" but received type "number"
anelhut.0 | 2022-11-01 16:37:53.333 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Brightness"
anelhut.0 | 2022-11-01 16:37:53.332 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Brightness"
anelhut.0 | 2022-11-01 16:37:53.330 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Humidity"
anelhut.0 | 2022-11-01 16:37:53.329 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Humidity"
anelhut.0 | 2022-11-01 16:37:53.328 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Temperature"
anelhut.0 | 2022-11-01 16:37:53.327 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Temperature"
anelhut.0 | 2022-11-01 16:37:53.323 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.PowerFactor"
anelhut.0 | 2022-11-01 16:37:53.322 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.PowerFactor"
anelhut.0 | 2022-11-01 16:37:53.320 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ReactivePower"
anelhut.0 | 2022-11-01 16:37:53.318 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ReactivePower"
anelhut.0 | 2022-11-01 16:37:53.316 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ApparentPower"
anelhut.0 | 2022-11-01 16:37:53.314 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ApparentPower"
anelhut.0 | 2022-11-01 16:37:53.312 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ActivePower"
anelhut.0 | 2022-11-01 16:37:53.310 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ActivePower"
anelhut.0 | 2022-11-01 16:37:53.308 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.LineFrequency"
anelhut.0 | 2022-11-01 16:37:53.306 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.LineFrequency"
anelhut.0 | 2022-11-01 16:37:53.303 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.CurrentRMS"
anelhut.0 | 2022-11-01 16:37:53.301 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.CurrentRMS"
anelhut.0 | 2022-11-01 16:37:53.295 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.VoltageRMS"
anelhut.0 | 2022-11-01 16:37:53.293 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.VoltageRMS"
anelhut.0 | 2022-11-01 16:37:53.126 | debug | New hut status update: {"DeviceType":"NET-PwrCtrl","DeviceName":"NET-CONTROL","IP":"192.168.30.7","Netmask":"255.255.255.0","Gateway":"192.168.30.254","MacAdress":"00:04:A3:14:03:76","Relais":[{"RelaisNumber":1,"Name":"Modem","Status":1},{"RelaisNumber":2,"Name":"Firewall","Status":1},{"RelaisNumber":3,"Name":"Unifi Switch","Status":1},{"RelaisNumber":4,"Name":"frei","Status":1},{"RelaisNumber":5,"Name":"Raspimatic","Status":1},{"RelaisNumber":6,"Name":"Weatherman","Status":1},{"RelaisNumber":7,"Name":"Sonos","Status":1},{"RelaisNumber":8,"Name":"Dayton","Status":1}],"Blocked":0,"HttpPort":80,"Temperature":24.7,"Type":"ADV","IO":[],"Firmware":"NET-PWRCTRL_07.1","PowerMeasurement":false,"Sensor_1_Ready":false,"XOR_USER_Password":true,"LastUpdate":"11/1/2022, 4:37:53 PM"}
anelhut.0 | 2022-11-01 16:37:53.126 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :192.168.30.7:255.255.255.0:192.168.30.254:0.4.163.20.3.118:Modem,1:Firewall,1:Unifi Switch,1:frei,1:Raspimatic,1:Weatherman,1:Sonos,1:Dayton,1:0:80:IO.1,0,0:IO.2,0,0:IO.3,0,0:IO.4,0,0:IO.5,0,0:IO.6,0,0:IO.7,0,0:IO.8,0,0:24.7�C:NET-PWRCTRL_07.1:a:n:xor:
anelhut.0 | 2022-11-01 16:37:53.125 | debug | New hut status update: {"DeviceType":"NET-PwrCtrl","DeviceName":"NET-CONTROL","IP":"192.168.30.7","Netmask":"255.255.255.0","Gateway":"192.168.30.254","MacAdress":"00:04:A3:14:03:76","Relais":[{"RelaisNumber":1,"Name":"Modem","Status":1},{"RelaisNumber":2,"Name":"Firewall","Status":1},{"RelaisNumber":3,"Name":"Unifi Switch","Status":1},{"RelaisNumber":4,"Name":"frei","Status":1},{"RelaisNumber":5,"Name":"Raspimatic","Status":1},{"RelaisNumber":6,"Name":"Weatherman","Status":1},{"RelaisNumber":7,"Name":"Sonos","Status":1},{"RelaisNumber":8,"Name":"Dayton","Status":1}],"Blocked":0,"HttpPort":80,"Temperature":24.7,"Type":"ADV","IO":[],"Firmware":"NET-PWRCTRL_07.1","PowerMeasurement":false,"Sensor_1_Ready":false,"XOR_USER_Password":true,"LastUpdate":"11/1/2022, 4:37:53 PM"}
anelhut.0 | 2022-11-01 16:37:53.106 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :192.168.30.7:255.255.255.0:192.168.30.254:0.4.163.20.3.118:Modem,1:Firewall,1:Unifi Switch,1:frei,1:Raspimatic,1:Weatherman,1:Sonos,1:Dayton,1:0:80:IO.1,0,0:IO.2,0,0:IO.3,0,0:IO.4,0,0:IO.5,0,0:IO.6,0,0:IO.7,0,0:IO.8,0,0:24.7�C:NET-PWRCTRL_07.1:a:n:xor:
anelhut.0 | 2022-11-01 16:37:19.564 | info | check group user admin group admin: false
anelhut.0 | 2022-11-01 16:37:19.562 | info | check user admin pw iobroker: false,system.user.admin
anelhut.0 | 2022-11-01 16:37:19.458 | debug | Starting UDP listener on port: 2078
anelhut.0 | 2022-11-01 16:37:19.458 | debug | AnelHutCommunication constructor. this.userPasswordXOR = false
anelhut.0 | 2022-11-01 16:37:19.457 | debug | UserPasswordXOR: false
anelhut.0 | 2022-11-01 16:37:19.457 | info | Init device Technikraum
anelhut.0 | 2022-11-01 16:37:19.411 | info | Adapter anelhut initialized
anelhut.0 | 2022-11-01 16:37:19.410 | info | Found device in config: Technikraum | 192.168.30.7
anelhut.0 | 2022-11-01 16:37:19.410 | info | Found: 1 devices in configuration
anelhut.0 | 2022-11-01 16:37:19.410 | info | Adapter anelhut starting...
anelhut.0 | 2022-11-01 16:37:19.399 | info | starting. Version 1.0.10 in /opt/iobroker/node_modules/iobroker.anelhut, node: v16.16.0, js-controller: 4.0.23
anelhut.0 | 2022-11-01 16:37:19.176 | debug | States connected to redis: 127.0.0.1:9000
anelhut.0 | 2022-11-01 16:37:19.125 | debug | States create User PubSub Client
anelhut.0 | 2022-11-01 16:37:19.125 | debug | States create System PubSub Client
anelhut.0 | 2022-11-01 16:37:19.098 | debug | Redis States: Use Redis connection: 127.0.0.1:9000
anelhut.0 | 2022-11-01 16:37:19.056 | debug | Objects connected to redis: 127.0.0.1:9001
anelhut.0 | 2022-11-01 16:37:19.050 | debug | Objects client initialize lua scripts
anelhut.0 | 2022-11-01 16:37:18.963 | debug | Objects create User PubSub Client
anelhut.0 | 2022-11-01 16:37:18.962 | debug | Objects create System PubSub Client
anelhut.0 | 2022-11-01 16:37:18.961 | debug | Objects client ready ... initialize now
anelhut.0 | 2022-11-01 16:37:18.912 | debug | Redis Objects: Use Redis connection: 127.0.0.1:9001
anelhut.0 | 2022-11-01 16:37:15.453 | info | Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
anelhut.0 | 2022-11-01 16:37:15.452 | info | terminating
anelhut.0 | 2022-11-01 16:37:15.450 | info | Got terminate signal TERMINATE_YOURSELF
anelhut.0 | 2022-11-01 16:35:13.813 | info | check group user admin group admin: false
anelhut.0 | 2022-11-01 16:35:13.811 | info | check user admin pw iobroker: false,system.user.admin
anelhut.0 | 2022-11-01 16:35:13.711 | info | Init device Technikraum
anelhut.0 | 2022-11-01 16:35:13.669 | info | Adapter anelhut initialized
anelhut.0 | 2022-11-01 16:35:13.668 | info | Found device in config: Technikraum | 192.168.30.7
anelhut.0 | 2022-11-01 16:35:13.668 | info | Found: 1 devices in configuration
anelhut.0 | 2022-11-01 16:35:13.667 | info | Adapter anelhut starting...
anelhut.0 | 2022-11-01 16:35:13.654 | info | starting. Version 1.0.10 in /opt/iobroker/node_modules/iobroker.anelhut, node: v16.16.0, js-controller: 4.0.23
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
HI @Qlink84,
have you entered the user and password in the adapter configuration?
In the logs I can see that no user and password was given (see: error | Decode Message Error: NoPass").
Please enter your username/password in the adapter configuration or if you haven't changed something please use the default credentials (admin/anel).
Without username/password it's not working.
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
Hi @dan1-de,
yes i have entered it correctly. the error msg is because i've tried with different user, but changed it then back to the real one.
If user/pass would be the problem i guess i wouldn't even see the relais status, would i ?
When i turn relais on/off through anel webif, status in iobroker objects change correctly.
The only problem is i can't control the relais through iobroker...
if i go to objects in iobroker and manually set relais 8 to false
i get correct info in iobroker log
but nothing changes at the anel sockets
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Hi @Qlink84 ,
for reading only there is no user/password needed.
Because of that the status refresh is working well.
For controlling the relais the username/password is required.
You can try in manual mode with this command to verify if it's working without the adapter:
General Command Structure: echo "Sw_on%relaisNumber%%user%%password%" | nc -4u %yourAnelIP% 75
Example: echo "Sw_on2adminanel" | nc -4u 192.168.30.7 75
This example turns the Relais Nr. 2 on.
To turn it off you can use this command: echo "Sw_on2adminanel" | nc -4u 192.168.30.7 75
Can you check please if this is working.
Please make sure that you are using the admin user. If you use another user make sure that all the permissions are set in the Anel Webinterface.
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
Hi @dan1-de,
i'm using default admin/anel login now, but it's still not working through adapter... no change in behavior when i try to set relais status manually to true or false in iobroker objects...
echo "Sw_off8adminanel" | nc -4u 192.168.30.7 75 works without a problem
http://192.168.30.7/?Sw_on=6,adminanel works also without a problem
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Ok that's strange. Is your iobroker running inside docker or directly on the host?
Can you provide the adapter logs with admin anel credentials?
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
it's running on a hyper-v ubuntu vm, but the echo "Sw_off8adminanel" | nc -4u 192.168.30.7 75 command works fine executed inside the vm, so the connection from iobroker to anel should be no issue right ?
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Yes, that was exactly the background of my question.
If it's working from inside the vm everything should be set up correctly.
Have you checked the "XOR User & Password" checkbox. Could you try without this checkbox checked ? If the checkbox was not checked please try with checkbox checked.
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
In addition you could install the latest dev build of the adapter using this url:
https://github.com/dan1-de/ioBroker.anelhut/tarball/dev
Installieren aus eigener URL -> Benutzerdefiniert
I've added some additional log messages.
Please set the logging to debug and provide me the logs. Make sure that there is at least one switch command visible in the logs.
If you have concerns about data protection, you can also send an email: [email protected]
We can have an online session (Teamviewer/Teams) too.
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
installed dev build, but nothing has changed really in log output (tried to change relais 4 via iobroker objects)
`
| anelhut.0 | 2022-11-08 06:52:38.404 | info | state anelhut.0.Technikraum.relais.4.Status changed: true (ack = true) |
|---|---|---|---|
| anelhut.0 | 2022-11-08 06:52:06.699 | info | state anelhut.0.Technikraum.relais.4.Status changed: false (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.558 | info | state anelhut.0.Technikraum.relais.8.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.558 | info | state anelhut.0.Technikraum.relais.7.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.557 | info | state anelhut.0.Technikraum.relais.6.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.556 | info | state anelhut.0.Technikraum.relais.5.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.555 | info | state anelhut.0.Technikraum.relais.4.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.554 | info | state anelhut.0.Technikraum.relais.3.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.554 | info | state anelhut.0.Technikraum.relais.2.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.553 | info | state anelhut.0.Technikraum.relais.1.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.552 | info | state anelhut.0.Technikraum.relais.8.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.552 | info | state anelhut.0.Technikraum.relais.7.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.551 | info | state anelhut.0.Technikraum.relais.6.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.550 | info | state anelhut.0.Technikraum.relais.5.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.549 | info | state anelhut.0.Technikraum.relais.4.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.545 | info | state anelhut.0.Technikraum.relais.3.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.545 | info | state anelhut.0.Technikraum.relais.2.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.544 | info | state anelhut.0.Technikraum.relais.1.Status changed: true (ack = true) |
| anelhut.0 | 2022-11-08 06:51:12.479 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Brightness" |
| anelhut.0 | 2022-11-08 06:51:12.478 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Brightness" |
| anelhut.0 | 2022-11-08 06:51:12.475 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Humidity" |
| anelhut.0 | 2022-11-08 06:51:12.474 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Humidity" |
| anelhut.0 | 2022-11-08 06:51:12.472 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Temperature" |
| anelhut.0 | 2022-11-08 06:51:12.472 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.sensor.Sensor_1_Temperature" |
| anelhut.0 | 2022-11-08 06:51:12.467 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.PowerFactor" |
| anelhut.0 | 2022-11-08 06:51:12.465 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.PowerFactor" |
| anelhut.0 | 2022-11-08 06:51:12.465 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ReactivePower" |
| anelhut.0 | 2022-11-08 06:51:12.462 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ReactivePower" |
| anelhut.0 | 2022-11-08 06:51:12.462 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ApparentPower" |
| anelhut.0 | 2022-11-08 06:51:12.460 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ApparentPower" |
| anelhut.0 | 2022-11-08 06:51:12.459 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ActivePower" |
| anelhut.0 | 2022-11-08 06:51:12.457 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.ActivePower" |
| anelhut.0 | 2022-11-08 06:51:12.456 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.LineFrequency" |
| anelhut.0 | 2022-11-08 06:51:12.454 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.LineFrequency" |
| anelhut.0 | 2022-11-08 06:51:12.454 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.CurrentRMS" |
| anelhut.0 | 2022-11-08 06:51:12.453 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.CurrentRMS" |
| anelhut.0 | 2022-11-08 06:51:12.449 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.VoltageRMS" |
| anelhut.0 | 2022-11-08 06:51:12.449 | info | undefined is not a valid state value for id "anelhut.0.Technikraum.power.VoltageRMS" |
| anelhut.0 | 2022-11-08 06:51:12.362 | debug | New hut status update: {"DeviceType":"NET-PwrCtrl","DeviceName":"NET-CONTROL","IP":"192.168.30.7","Netmask":"255.255.255.0","Gateway":"192.168.30.254","MacAdress":"00:04:A3:14:03:76","Relais":[{"RelaisNumber":1,"Name":"Modem","Status":1},{"RelaisNumber":2,"Name":"Firewall","Status":1},{"RelaisNumber":3,"Name":"Unifi Switch","Status":1},{"RelaisNumber":4,"Name":"frei","Status":1},{"RelaisNumber":5,"Name":"Raspimatic","Status":1},{"RelaisNumber":6,"Name":"Weatherman","Status":1},{"RelaisNumber":7,"Name":"Sonos","Status":1},{"RelaisNumber":8,"Name":"Dayton","Status":1}],"Blocked":0,"HttpPort":80,"Temperature":24.4,"Type":"ADV","IO":[],"Firmware":"NET-PWRCTRL_07.1","PowerMeasurement":false,"Sensor_1_Ready":false,"XOR_USER_Password":true,"LastUpdate":"11/8/2022, 6:51:12 AM"} |
| anelhut.0 | 2022-11-08 06:51:12.362 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :192.168.30.7:255.255.255.0:192.168.30.254:0.4.163.20.3.118:Modem,1:Firewall,1:Unifi Switch,1:frei,1:Raspimatic,1:Weatherman,1:Sonos,1:Dayton,1:0:80:IO.1,0,0:IO.2,0,0:IO.3,0,0:IO.4,0,0:IO.5,0,0:IO.6,0,0:IO.7,0,0:IO.8,0,0:24.4�C:NET-PWRCTRL_07.1:a:n:xor: |
| anelhut.0 | 2022-11-08 06:51:12.361 | debug | New hut status update: {"DeviceType":"NET-PwrCtrl","DeviceName":"NET-CONTROL","IP":"192.168.30.7","Netmask":"255.255.255.0","Gateway":"192.168.30.254","MacAdress":"00:04:A3:14:03:76","Relais":[{"RelaisNumber":1,"Name":"Modem","Status":1},{"RelaisNumber":2,"Name":"Firewall","Status":1},{"RelaisNumber":3,"Name":"Unifi Switch","Status":1},{"RelaisNumber":4,"Name":"frei","Status":1},{"RelaisNumber":5,"Name":"Raspimatic","Status":1},{"RelaisNumber":6,"Name":"Weatherman","Status":1},{"RelaisNumber":7,"Name":"Sonos","Status":1},{"RelaisNumber":8,"Name":"Dayton","Status":1}],"Blocked":0,"HttpPort":80,"Temperature":24.4,"Type":"ADV","IO":[],"Firmware":"NET-PWRCTRL_07.1","PowerMeasurement":false,"Sensor_1_Ready":false,"XOR_USER_Password":true,"LastUpdate":"11/8/2022, 6:51:12 AM"} |
| anelhut.0 | 2022-11-08 06:51:12.360 | debug | New Message from: 192.168.30.7:75 - NET-PwrCtrl:NET-CONTROL :192.168.30.7:255.255.255.0:192.168.30.254:0.4.163.20.3.118:Modem,1:Firewall,1:Unifi Switch,1:frei,1:Raspimatic,1:Weatherman,1:Sonos,1:Dayton,1:0:80:IO.1,0,0:IO.2,0,0:IO.3,0,0:IO.4,0,0:IO.5,0,0:IO.6,0,0:IO.7,0,0:IO.8,0,0:24.4�C:NET-PWRCTRL_07.1:a:n:xor: |
maybe a teamviewer session would be better ? today, ~18:00 o'clock ?
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
update: it seems like controlling relais through blockly script works now since adapter update.
however, controlling relais manually through iobroker objects still doesn't work
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Ok very strange. Could you stop the adapter and delete all the objects created under anelhut.0 and start the adapter again.
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
If you change a status manually via iobroker admin/objects you have to make sure that the ack is set to false.
ack=false means that the adapter has something to do. ack=true means that the adapter has updated a state
from ioBroker/ioBroker.knx#173:
ack=true are commands to the device.
ack=false are values reported by the device
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
omg, that was the problem... i always ticked ack ...🤐
works now, thank you for that information.
now the only "problem" is that temperature is not read through the adapter...
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
No problem. The main thing is that it works now.
There is no sensor data visible in the udp respone of your device.
Have you enabled the sensor in the webinterface ?
Can you see the sensor data in the webinterface ?
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
Seems like i don't have this sub menu...
it looks like this on my ADV:
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Ah ok. You have no sensor connected. The temperature measurement is available by default. Sensor data is only available with the optional external sensor.
Please check the object structure of the adapter again this value should be available.
anelhut.0.%devicename%.general.Temperature
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
got it. wasn't looking under general but under sensor... 🤭
thanks again for your help.
you can close this issue.
p.s. the only "cosmetical" thing is, that every time a relais status changes i get a lot of theses messages in iobroker log, because i dont have these values with my PWR ADV:
from iobroker.anelhut.
Qlink84
commented on July 18, 2024
p.p.s auch wenn sich nur ein relais ändert wird im log immer die komplette Palette anzeigt:
from iobroker.anelhut.
dan1-de
commented on July 18, 2024
Ich werde das Ticket schließen. Das mit dem Sensor könnte man noch optimieren.
Es werden immer alle Relais angezeigt, das bei jeder Anfrage der Status aller Relais gesendet wird.
Sind beides nur kosmetische Fehler die ich ihm Rahmen des nächsten Release beheben werde.
from iobroker.anelhut.
Related Issues (9)
- No object structure created HOT 4
- Not working on Home V.3 - Firmware-Version: HOME 4.6 HOT 2
- No connection to Anel-Hut HOT 5
- Unable to connect to NET-PwrCtrl PRO HOT 11
- You are assigning a number to the state ... which expects a boolean. HOT 2
- Update stable version in repo from 1.0.13 to 1.0.14 HOT 1
- Update stable version in repo from 1.0.13 to 1.0.14 HOT 1
- Don't work with js-controller HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from iobroker.anelhut.