Does this integration work with the SUN-M160G4-EU-Q0? about ha-solarman

[Adminius]

Remove doen't works, it came again, lol
but 0.0 works now

Thanks!

[davidrapan]

Great!

[davidrapan]

Supported Inverters

[davidrapan]

Hi there!

Is there a "supported" or "checked" device list?

Not yet. But list from the original integration should be valid.

But yes this integration is made to work with Solarman Stick Logger so you need that piece of a HW.

As for the support of mentioned device profile 'deye_4mppt.yaml' is probably the one to go...

And when comes to the ESP I'm not really that much familiar to be giving advices.. :/

[Adminius]

Hey @davidrapan I bought M160G4, my problem ist now, that it's serial number ends wirh letter "B" and I can't put letter in to serial number field

[davidrapan]

Hi @Adminius, you need serial number from the Solarman Stick Logger and they should only contain numbers.

[Adminius]

yeah...

this inverter, like other deye micro inverters, has integrated logger.

I tried this integration also with my Deye SUN12K and other micro inverters that worked with "original" Solarman integration and it doen't work at all... (sticks at intiaslisation). May I should go back to "original" Sorarman integration... sadly :/

EDIT: Am I on the wrong way? Inverter Serial or Solarman Serial?

[davidrapan]

Solarman serial, its little bit lower on the screenshot you sent here.

On this row:

Edit: If you used latest Stephans integration it has to work with mine too they use the same library for solarman protocol. I'm personally running SG04LP3.

Edit2: It is possible that for string inverters you gonna need beta pre-release of this integration. which you can enable using Redownload under 3 dots button menu in top right corner on the HACS page. Then just select the latest version (24.07.29) and click DOWNLOAD.

[Adminius]

Now I used the Solarman Serial

[davidrapan]

It is possible that for string inverters you gonna need beta pre-release of this integration. which you can enable using Redownload under 3 dots button menu in top right corner on the HACS page. Then just select the latest version (24.07.29) and click DOWNLOAD.

You are using 24.07.24

[davidrapan]

Also always enable debug on the same page you just showed me the screenshot from and send logs which it produces without it I really can't help you much. Logs are crucial.

[Adminius]

sm_debug_M160G4.txt
Here is debug from one M160G4 only

[davidrapan]

So it is working great but it gets some incorrect data for Total Production:

ValueError: Invalidate complete dataset (Total Production ~ 0.0)

Which profile are you loading?

[Adminius]

Oha, it is comletely new inverter, yesterday connected to PV panels (WiFi Setup and so on), but not to the grid yet, that's why 0 kWh production

Profile: 4mppt

[davidrapan]

Remove that invalidation from the profile you are loading.

From:

- name: "Total Production"

Remove that:

    invalidate_all:

Under:

  validation:

[davidrapan]

I'm gonna remove it from the repository too as it really does not make any sense for it being there. Cause as you can see it causes troubles for any new inverter, lol.

I will probably change it to:

validation:
  min: 0.0
  invalidate_all:

So 0.0 is an okay value for the validation.

[davidrapan]

2a10012