Drivers problem about ch55xduino

[DeqingSun]

It feels like a hardware issue. Did you made your own board? Did you have capacitors on 3.3V and 5V?
Did you try another computer.

[veso266]

Hmm a hardware issue
I did not made my own board, I found the board in the dumbster (maybe thats the reason why it was there in the first place)

I did not have any capacitors, just did like this guy did (have the same board): https://www.youtube.com/watch?v=Y5rnfOp5gMM&t=201s
Holding P36 while plugging USB (or alternative way, hold P36, click the RST key, and release the P36 key 0.5S later) to enter bootloader mode, which it secsesfully does, its just that VID and PID are 0 for some strange reason

If its a hardware issue, do you maybe have any idea what could be wrong (cold solder joint maybe)
This board is so small that I bearly see anything on it, but I would still be happy if I could fix a thing someone thought its for disposal (the earth is more sustainable that way)

[DeqingSun]

Try another computer, preferable linux/mac to avoid any driver hassle. If it still doesn't work, it does not worth fixing. Trouble shooting USB issue will need a lot of equipment and get a new board actually generate less waste.