Comments (19)
Without a log, best guess would be that you probably mixed up system32 and syswow64 when installing
In a default Wine prefix that would be as follows:
export WINEPREFIX=/path/to/wineprefix
cp x64/.dll $WINEPREFIX/drive_c/windows/system32
cp x32/.dll $WINEPREFIX/drive_c/windows/syswow64
winecfg
wine version: wine-vanilla-9.7
Also you should probably know that Yakuza 0 needs esync to reliably save: ValveSoftware/Proton#492 (comment)
from dxvk.
Post a full Wine log if you can. Maybe ran with WINEDEBUG=+loaddll
from dxvk.
If there's no log despite setting DXVK_LOG_PATH
then chances are our DLLs aren't even getting loaded. Both games are known to work fine with DXVK.
from dxvk.
In order to setup dxvk in my wineprefix, which I created a brand new one just for yakuza-0 I did the following:
WINEPREFIX="<game_dir>/prefix/"
WINEARCH="win64"
WINEESYNC=1
WINEFSYNC=1
WINE_FULLSCREEN_FSR=1
WINE_FULLSCREEN_FSR_STRENGTH=2
DXVK_FRAME_RATE_LIMIT=145
setup_dxvk.sh install --symlink
Then I just replaced the setup line with wine <game_dir>/<yakuza.exe>
I will try enabling wine debugging hopefully that will help.
from dxvk.
I just tried WINEDEBUG=+all and WINEDEBUG=+loaddll and I am getting no extra output other than what I said.
from dxvk.
That's impossible, there can't just be that one line with +all
from dxvk.
Maybe its due to the strip useflag in gentoo I will remove it and see if it provides a log. The thing is with +all I ran it without dxvk and was getting a lot more lines of output than I usually get so I thought it was working.
from dxvk.
I don't think it should be related to the wine build config, i don't think it's possible to disable the logging completely at build time, and it seems like it works without DXVK? But I also don't see how there could possibly be only that one line in the log and nothing else with +loaddll and DXVK loaded, it should at least print a line for loading the dlls, if nothing else.
from dxvk.
I still couldn't figure out why the debug wasn't showing anything extra. However, I think I have solved part of the issue already. It seems that when I used setup_dxvk.sh (which is shipped with gentoo repos dxvk) the symlinked dxvk dlls were not working as it should. So after I did setup_dxvk.sh install --symlink and then replaced the symlinks with the dlls that you have on github it seems that dxvk is running finally (although the framerate is less than when I used to play with my amd rx 6800 could be just nvidia drivers or something) but its a lot more than stock wine.
I am confused on this as some games i.e fallout 4 is able to use the symlinked dlls however games like yakuza 0 and fallout new vegas can't. What could be the issue? I am not using crossdev-mingw useflag so its using dev-util/mingw64-toolchain rather than crossdev.
from dxvk.
I was trying this again today and it seems like I was able to obtain a wine log with +loaddll.
Thanks for the wait.
from dxvk.
looks like when using system compiled dxvk on gentoo and running yakuza creates some sort of stack smashing.
from dxvk.
have you tried using our release binaries instead?
I'm seeing exactly zero dxvk messages in that log though so it seems to just fail horribly before reaching any of our code for some reason.
from dxvk.
have you tried using our release binaries instead?
I'm seeing exactly zero dxvk messages in that log though so it seems to just fail horribly before reaching any of our code for some reason.
I still couldn't figure out why the debug wasn't showing anything extra. However, I think I have solved part of the issue already. It seems that when I used setup_dxvk.sh (which is shipped with gentoo repos dxvk) the symlinked dxvk dlls were not working as it should. So after I did setup_dxvk.sh install --symlink and then replaced the symlinks with the dlls that you have on github it seems that dxvk is running finally (although the framerate is less than when I used to play with my amd rx 6800 could be just nvidia drivers or something) but its a lot more than stock wine.
I am confused on this as some games i.e fallout 4 is able to use the symlinked dlls however games like yakuza 0 and fallout new vegas can't. What could be the issue? I am not using crossdev-mingw useflag so its using dev-util/mingw64-toolchain rather than crossdev.
Yes I meant I used your release binaries and it was working. However, the ones that my system compiled for some reason in these games it wasn't working which is very weird. So the release binaries on github for this version of dxvk worked for yakuza 0 etc however when I try compiling these versions of dxvk on my system and used setup_dxvk.sh it doesn't work and provides that wine.log that I have posted.
from dxvk.
For comparison this is the wine.log when I use the dxvk binaries provided on github.
If you compare lines 217 onwards for both logs you can see that this is where it differs.
from dxvk.
Gentoo here, while we do default to -fstack-protector-strong
system-wide, the default mingw toolchain we provide does not (prefer to avoid most security features given how fragile Wine can be, Edit: the implementation of the features themselves can also be like how gcc+mingw crashed with -fstack-clash-protection
for a while). I believe any users affected by this is either passing -fstack-protector-strong
or similar themselves in *FLAGS
or using a different toolchain that does default-ssp (e.g. with crossdev tooling in gentoo)
Does indicate there may be something wrong with either dxvk or mingw64-runtime, but to have a shot at reproducing would need to build both with it (haven't tried, Edit: and I assume the binaries here do not already).
If really needed, Gentoo could work around this by forcing explicit -fno-stack-protector
in the runtime+dxvk ebuilds (ignoring user settings) though.
from dxvk.
As ionenwks stated its because mingw64-toolchain was compiled with -fstack-protector-strong. However, while this does indicate that something is "wrong" disabling this and recompiling dxvk does make it work.
from dxvk.
Not sure how to provide any help here, things like asan unfortunately don't work with mingw and we obviously can't use native builds with Windows games.
FWIW, building dxvk itself with -fstack-protector-strong
works fine here with Kiwami at least. Don't have 0 installed right now.
from dxvk.
Not sure how to provide any help here, things like asan unfortunately don't work with mingw and we obviously can't use native builds with Windows games.
FWIW, building dxvk itself with
-fstack-protector-strong
works fine here with Kiwami at least. Don't have 0 installed right now.
Yeah that gave me no issues either, I needed to build mingw's runtime itself with it then build dxvk against these to start having issues. fwiw doing that doesn't seem to break wine itself built using the same mingw.
Unfortunate but if debugging is going to be hard, guess passing -fno-stack-protector is still what we can go with downstream anyhow.
from dxvk.
Actually, I just remembered that support for this is kind of new in mingw64 11 (it used to be straight up broken with <=10). This gives decent chances of the issue being in mingw itself rather than dxvk.
Think it can be considered experimental and skipping using it seems fair in that context.
from dxvk.
Related Issues (20)
- [Black Mesa] Transparency effects have very different rendering compared to native D3D9 HOT 7
- Graphical and color distortions in The Witcher HOT 3
- [d3d8] Ballance black screen HOT 5
- How do I use dxvk-native on Linux? HOT 4
- ninja: build stopped: subcommand failed - 'remove_if' is not a member of 'std' HOT 4
- Spider-Man Shattered Dimensions: light cutoff and flickering HOT 7
- Moonshot Feature Request: Generic AFMF HOT 4
- Mafia: The City of Lost Heaven on DXVK 2.4 = Crash HOT 5
- [d3d9] GTA: Vice City 1.0 crashes after intro video HOT 15
- Documentation: 32 bit and 64 bit mixed? HOT 1
- [d3d9] Might and Magic Heroes VI: vsync switch not working HOT 7
- Do all depth-stencil images need `VK_IMAGE_USAGE_SAMPLED_BIT` set by default? HOT 3
- About the implementation of D3D10.dll HOT 7
- [d3d9] I.G.I 2: Covert Strike doesn't boot HOT 14
- Rainbow Six 3 - broken Planing Phase. HOT 8
- Dishonored 2 - LOD Texture issue HOT 18
- Add Direct3D 7 support HOT 3
- [Regression] [d3d9] [Crash] Medieval 2. The mouse pointer disappears from the screen and the game crashes when loading without any error. HOT 13
- [d3d9, regression] Source Filmmaker freeze
- D3D11SwapChain: Failed to recreate surface: VK_ERROR_OUT_OF_HOST_MEMORY
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from dxvk.