PinePhone is not detected as USB device by the PC about jumpdrive

[wzuo]

I have the same problem. Running Kubuntu 20.10

[1416255.329694] usb 1-4: new full-speed USB device number 24 using xhci_hcd
[1416255.329884] usb 1-4: Device not responding to setup address.
[1416255.537641] usb 1-4: Device not responding to setup address.
[1416255.745784] usb 1-4: device not accepting address 24, error -71

[nmauersberg]

Same here, been stuck on this for a while now..
(Tried Manjaro xfce / Windows 10)

[bam80]

Whoever experiencing this problem please try to detect your hw revision.

[gabrieldevillers]

Have you checked other software(s) are able to give USB mass-storage access ? Such as Tow-Boot when booting with "volume up" pressed, or booting an OS from the SD Card and then trying to use the PinePhone as USB mass storage.

Apologies for being trivial, but this may "simply" be hardware problem: I have a PinePhone with a damaged USB-C connector that behaves exactly like that (same messages), unless a small pressure is applied on the cable (such as having the phone lay on the cable end). I would suggest trying to change USB cable, then the USB-C sideboard (currently out of stock 😞 ) and maybe also the FPC cable.

[sven-frotscher]

Whoever experiencing this problem please try to detect your hw revision.

I have the Beta Edition With Convergence Package and don't see the PP in lsusb or the dmesg (also see #85).
If you need more precise information: Can you obtain that in the Jumpdrive shell? If so, how?