eDP connector pin 1 location about framework-laptop-13

[eclecticc]

We've gotten small volume cable assemblies before from https://www.darloxcn.com/

I would recommend changing the board though rather than the cable, since prototype cables will be less robust and reliable than the production ones in the laptop.

Here is what the pinout looks like on the PCB:

[eclecticc]

I added a note in the pinouts file for clarity. Thanks for reporting this.

[imnotjames]

I have a breakout board for the edp connector. I'll do my best to test it with a multimeter to confirm what you're seeing.

Can someone recommend a vendor that would be willing to do a custom Cabline-UM harness to flip the pinout?

I'd be interested in this as well, but I haven't seen anything like that.

[basketofkittens]

@imnotjames thanks for checking on that!

I've emailed a few domestic micro-coax harness vendors that advertise Cabline-UM assemblies. So far one has told me they have no stock and I'm still waiting to hear back from the others. I haven't dipped my toe in with any overseas vendors yet.

[basketofkittens]

@eclecticc thank you for the information! The mainboard pinout is definitely flipped in relation to mine. That's unfortunate.

Thank you for the vendor suggestion. Your point about production cables is well taken, but a little less relevant in my case seeing as I'm not using the Framework display or cable. I've ended up with an identical Cabline-UM connector on my display board since the above COTS cable was the easiest one for me to source at the time. That being said, I'm still leaning toward re-spinning the board since others wouldn't need to get a custom cable if they decide to use my design for their own purposes.

Would it be possible to add a note to the pinouts.md file in this repo so as to help others avoid the same mistake in the future?

[imnotjames]

Oof, after testing my breakout this explains a lot of why I was having trouble.

I can confirm this is "backwards" from expectation based on the data sheet and as I understood other pin outs