Comments (8)
these were taken in a 2 second period
(edit: on a MSI MAG B550M MORTAR WIFI (MS-7C94), BIOS 1.57 01/12/2021
)
nct6683.ko
nct6687-isa-0a20
Adapter: ISA adapter
VIN0: 992.00 mV (min = +0.00 V, max = +0.00 V)
VIN1: 1.01 V (min = +0.00 V, max = +0.00 V)
VIN2: 1.09 V (min = +0.00 V, max = +0.00 V)
VIN3: 672.00 mV (min = +0.00 V, max = +0.00 V)
VIN4: 448.00 mV (min = +0.00 V, max = +0.00 V)
VIN5: 832.00 mV (min = +0.00 V, max = +0.00 V)
VIN6: 720.00 mV (min = +0.00 V, max = +0.00 V)
VIN7: 1.52 V (min = +0.00 V, max = +0.00 V)
VCC: 3.38 V (min = +0.00 V, max = +0.00 V)
VTT: 1.82 V (min = +0.00 V, max = +0.00 V)
VSB: 3.31 V (min = +0.00 V, max = +0.00 V)
AVSB: 3.31 V (min = +0.00 V, max = +0.00 V)
VTT: 1.82 V (min = +0.00 V, max = +0.00 V)
VBAT: 3.15 V (min = +0.00 V, max = +0.00 V)
VREF: 0.00 V (min = +0.00 V, max = +0.00 V)
cpu fan: 575 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
system fan1 (rear): 0 RPM (min = 0 RPM)
system fan2 (front): 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
fan8: 0 RPM (min = 0 RPM)
fan9: 0 RPM (min = 0 RPM)
fan10: 0 RPM (min = 0 RPM)
AMD TSI Addr 98h: +33.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = AMD AMDSI
Diode 0 (curr): +37.5°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermal diode
Thermistor 15: +32.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 1: +41.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 16: +31.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
Thermistor 0: +35.0°C (low = +0.0°C)
(high = +0.0°C, hyst = +0.0°C)
(crit = +0.0°C) sensor = thermistor
intrusion0: ALARM
beep_enable: disabled
nct6687.ko
nct6687-isa-0a20
Adapter: ISA adapter
+12V: 12.10 V (min = +12.07 V, max = +12.10 V)
+5V: 5.06 V (min = +5.03 V, max = +5.06 V)
+3.3V: 3.33 V (min = +0.00 V, max = +3.33 V)
CPU Soc: 1.10 V (min = +1.09 V, max = +1.10 V)
CPU Vcore: 396.00 mV (min = +0.40 V, max = +0.74 V)
CPU 1P8: 1.83 V (min = +1.83 V, max = +1.83 V)
CPU VDDP: 0.00 V (min = +0.00 V, max = +0.00 V)
DRAM: 1.36 V (min = +1.36 V, max = +1.36 V)
Chipset: 836.00 mV (min = +0.83 V, max = +0.84 V)
cpu fan: 576 RPM (min = 573 RPM, max = 809 RPM)
Pump Fan: 0 RPM (min = 0 RPM, max = 0 RPM)
system fan1 (rear): 0 RPM (min = 0 RPM, max = 0 RPM)
system fan2 (front): 0 RPM (min = 0 RPM, max = 0 RPM)
System Fan #3: 0 RPM (min = 0 RPM, max = 0 RPM)
System Fan #4: 0 RPM (min = 0 RPM, max = 0 RPM)
System Fan #5: 0 RPM (min = 0 RPM, max = 0 RPM)
System Fan #6: 0 RPM (min = 0 RPM, max = 0 RPM)
CPU: +33.0°C (low = +33.0°C, high = +39.0°C)
System: +38.0°C (low = +37.0°C, high = +38.0°C)
VRM MOS: +32.0°C (low = +32.0°C, high = +32.0°C)
PCH: +41.0°C (low = +41.0°C, high = +41.0°C)
CPU Socket: +31.0°C (low = +31.0°C, high = +31.0°C)
PCIe x1: +35.0°C (low = +35.0°C, high = +35.0°C)
M2_1: +0.0°C (low = +0.0°C, high = +0.0°C)
module loading info:
[ 8902.471113] nct6687: Found NCT6687D or compatible chip at 0x004e:0x0a20
[ 8902.472384] nct6687 nct6687.2592: NCT6687D EC firmware version 1.0 build 05/07/20
from nct6687d.
ps. which m2 slot is m2_1? because I do have a nvme in the m2_1 slot, the one connected to the cpu. it reports its own temperature, but here it says 0⁰.
also,
do you have a plan of upstreaming the module?
from nct6687d.
@gdamjan - Thanks for the work on this. I have the same question:
do you have a plan of upstreaming the module?
from nct6687d.
The main difference is the nct6683 is not the same chipset as nct6687, and command line sensor with the nct6683 module report wrong value for temp and voltage. I have tested it by recompiling the source nct6683.c from 5.10 on kernel 5.4 & 5.8.
Also temp/voltage labels are also wrong, the number of register aren't the same. The only thing working correctly is fan sensor.
About 5.11 I don't have tested yet, but the source code nct6683.c looks like the same.
from nct6687d.
Thanks. I'm gonna compile this module too, and compare the results, and paste them here.
from nct6687d.
As you can see, voltage are not correct, values & labels
And in you report something goes wrong:
system fan1 (rear): 0 RPM (min = 0 RPM, max = 0 RPM)
system fan2 (front): 0 RPM (min = 0 RPM, max = 0 RPM)
It's not correct labels provided by the module. It must be:
System Fan #1: 0 RPM (min = 0 RPM, max = 0 RPM)
System Fan #2: 0 RPM (min = 0 RPM, max = 0 RPM)
from nct6687d.
It's not correct labels provided by the module. It must be:
I have some label overrides in /etc/sensors.d/msi-mortar.conf
(should've removed the file before pasting).
from nct6687d.
The main difference is the nct6683 is not the same chipset as nct6687, and command line sensor with the nct6683 module report wrong value for temp and voltage. I have tested it by recompiling the source nct6683.c from 5.10 on kernel 5.4 & 5.8.
Also temp/voltage labels are also wrong, the number of register aren't the same. The only thing working correctly is fan sensor.
The upstream drivers usually don't apply scaling factors to voltages, especially for newer hardware, so that is expected.
It is possible to submit the configuration files upstream, but as long as nobody did that, the output will be incorrect.
If you apply the same multipliers (12 for in0, 5 for in1, 2 for in3 and 3 for in9), the voltages will be the same (obviously).
(Whether they are correct is another question, but it seems about right for my system.)
I've attached my configuration file as an example for those who are interested. (Remove the .txt at the end, only needed for uploading the file.)
Note though, that I changed the fan labels to my usage of the connectors and ignored those that I'm not using.
I'm not yet sure what to do with the additional voltage registers
in6-in8 and in12-in14
Also didn't set min/max/low/high/hyst/crit values yet, since I'm still in the process of verifying the data.
from nct6687d.
Related Issues (20)
- Seems to work on PRO B650M-A WIFI (MS-7D77) HOT 1
- MSI PRO Z690-A DDR4 (MS-7D25) HOT 2
- Partially works with ASRock B650E PG-ITX HOT 10
- Works with MSI PRO Z790-P DDR4
- Missing sensor MSI X670e Carbon Wifi HOT 1
- z790 DDR5
- Compatible with MAG B650 Carbon WiFi HOT 6
- Compatible with MSI MAG X670E TOMAHAWK WIFI HOT 1
- Address verification fails after AsRock B550 Taichi BIOS update HOT 1
- [SOLVED] Install error with new kernel 5.15-79 HOT 1
- Loading with /etc/modules-load.d/nct6687.conf doesn't work HOT 4
- Can't give fan control back to the firmware HOT 10
- reverse engineering for nct6687 nct6683 HOT 9
- NCT6686D-L HOT 1
- Works with MSI MPG B550 Gaming Plus HOT 1
- Access to PWM control without sudo HOT 24
- modprobe error on MSI MAG B660M MORTAR HOT 6
- Partially works with Asrock X670E Steel Legend HOT 2
- Partially works with MSI B650M MORTAR WIFI
- Weird results on MSI B550 gaming gen3 HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from nct6687d.