glics / 3dp_config

Config files from my 3D printer setup

Config files and utilities for Klipper

This repository contains configuration files for Klipper running on a Raspberry Pi 3B for my Anycubic i3 Mega S. These files are provided as a personal backup and might require adjustments for your specific setup.

Usage

1. Clone this repo.
2. Copy the printer.cfg and macros.cfg files to your cofig directory, ie. ~/printer_data/config/ on MainsailOS.
3. [Optional] Follow the instructions in tft_config/README.md to configure your TFT display.
4. Edit the configuration files as needed for your specific setup. Refer to the Klipper documentation and online resources for details.
5. Restart Klipper.

Important notes

• These files are provided as a backup and may require adjustments based on your specific printer and hardware.
• Do not attempt to contribute changes to this repository as it serves as a personal backup.
• Always back up your original configuration files before making changes.
• Refer to the Klipper documentation and online resources for detailed information on configuration options and troubleshooting.

Future plans

• Add a macro to backup the config files in one click (copy, commit and push the files)
• Add start and end gcode scripts from the slicer to the repo
• Add some of the slicer configurations (ie. speed, acceleration, extruder and filament settings, etc)
• Just get a Bambu Lab

Additional information

• Klipper documentation: https://www.klipper3d.org/
• KlipperScreen documentation: https://klipperscreen.readthedocs.io/en/latest/
• Mainsail web interface: https://docs.mainsail.xyz/
• Klipper community forum: https://klipper.discourse.group/

Disclaimer

Please note that these files are provided for informational purposes only and should not be considered a complete or guaranteed solution for your specific setup. Use them at your own risk and make sure you understand the potential risks involved before modifying any configuration files.