Comments (4)
Are you running at very high feed rates? Do you get the same result at
lower feed rates?
On Sun, Jun 5, 2011 at 7:33 PM, dirktheeng
[email protected]
wrote:
I am running 12.5mm pulleys on my system (with the belt, the actual diameter could be slightly larger) with steppers that are 200 steps/rev set to 16x microstepping through the driver. This means that the circumferance is about 39.2mm and there are 3200 steps per rev. This means that my steps per mm should be very close to 81.5. However when I went to calibrate the axis, the actual distance traveled with a g1x100 command is 51.66mm. This means that my equivalent diameter is 6.457mm and that there are actually 157.737 steps/mm. I am curious as to why this would be so far off (infact almost a factor of 2). I mean, it doesn't really matter because with the right constant in there, it gives 100mm movement for a g1x100 command, but it is still a bit confusing.
Reply to this email directly or view it on GitHub:
https://github.com/simen/grbl/issues/22
from grbl.
the results are the same regardles of feed rates. I get to exactly the same position, it's just off by a factor of two.
from grbl.
Forget this issue. I just found out that the motors are 0.9 degree rather than 1.8 degree... some confusion from the data sheet.
from grbl.
ah, great. Thanks for reporting!
On Wed, Jun 15, 2011 at 1:26 AM, dirktheeng
[email protected]
wrote:
Forget this issue. I just found out that the motors are 0.9 degree rather than 1.8 degree... some confusion from the data sheet.
Reply to this email directly or view it on GitHub:
https://github.com/simen/grbl/issues/22#issuecomment-1370058
from grbl.
Related Issues (20)
- Bachin draw software servo problem HOT 1
- Self-squaring with CNC Shiel 3.0
- How to disconnect the GRBL serial connection after the stepper motor has completed its entire operation HOT 1
- homing issue on my cnc 3018 pro using ugs HOT 4
- H-Bridge adaption for GRBL
- Different ports for Step and dir pins of each stepper motor
- Move generated path in same time
- Grbl sets up correctly but HOT 1
- I encountered a problem with $$ command HOT 3
- grbl 'crashes' HOT 13
- GRBL homing problem when using the homing cycle in G-code after G1/G0 commands HOT 2
- How do I use variable spindle speed when Z axis limit switch is in use? HOT 5
- The site being 'moved' HOT 1
- pin assign
- About proactive processing
- Discrepancy sending gcode via python IDE vs a python program in cmd
- Alarm,Lim:000 Arduino CNC Shield HOT 2
- Servo is not working
- Change work area
- Project is dead? HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from grbl.