Trainer mode channel labels should reflect actual channel order about gruvin9x

[GoogleCodeExporter]

Original comment by [email protected] on 2 Jul 2011 at 3:16

• Changed state: Started

[GoogleCodeExporter]

I note that the channel order is in fact stored in general settings, so I'll 
move it to there instead. Ideally though, each model should be able to have a 
different wiring scheme ... but this will do for now.

Original comment by [email protected] on 2 Jul 2011 at 3:22

[GoogleCodeExporter]

r656 -- Channel Order moved from TEMPLATE to RADIO SETUP. Tested OK.

Original comment by [email protected] on 2 Jul 2011 at 4:04

[GoogleCodeExporter]

Ah .. I see now that the display order is changed, according to stick mode. SO 
that is OK, but the output channel assignments are always 1,2,3,4 instead or 
changing according to g_eeGeneral.templateSetup.

Original comment by [email protected] on 2 Jul 2011 at 4:40

[GoogleCodeExporter]

OK -- I'm a dummy. It was working correctly all the time. Sheesh.

But I find it confusing as all heck having the channels display in an order 
other than how my receivers are set up, so I went and fixed that -- at the cost 
of some arguably unnecessary extra flash bytes.

Original comment by [email protected] on 2 Jul 2011 at 6:04

[GoogleCodeExporter]

So, in the end, I ended up with exactly what I originally set out to do. Please 
excuse the confusion along the way in comments 3 through 5.

Original comment by [email protected] on 2 Jul 2011 at 6:10

• Changed state: Fixed

[GoogleCodeExporter]

Original comment by [email protected] on 23 Sep 2011 at 1:52

• Changed state: Verified