Exemple Flow about node-red-contrib-zigbee

[joseluisgodinho]

Thank you

[datobi2k]

Hi,
that's what I'm also interested in. I don't get commands to be send.

Unfortunately, I can't find any sample flow how to build it correct.

Maybe I'm a bit stupid, but I've got a CC2531 and 2 innr dim/adjustable white bulbs.

• installed git make build-essentials
• installed node-red-contrib-zigbee
• added device node
• added the shepherd (serial port was pre-configured and worked instantly, great!)
• detected and paired my 2 light-bulbs

Now I can see my paired devices in debug output from devices node, but I have no idea what to do in which format to get the the command node switching the bulbs on/off - or even more dim or change the white from warm to cold.

I'm expecting to set a payload with function on a button or switch to send this to the command node. But unlike the mqtt implementation, the command node has no configuration for the device to be controlled.

I have no idea how to setup the flow correct. Any ideas? hints?

[SkylightXD]

@joseluisgodinho
Here are my config to connect the first devices:

[SkylightXD]

This is my way to switch the OSRAM smart+ plug:

This is the payload to power on:
{"state":"on"}

[gary-clarke]

I can pair a device and see messages in debug but when I press Deploy I loose device and no more messages. here are some debug messages before I hit Deploy.
08/10/2019, 17:40:24node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "single", linkquality: 105 }
08/10/2019, 17:40:32node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "double", linkquality: 94 }
08/10/2019, 17:40:34node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "triple", linkquality: 94 }

Regards,
Gary

[marcsima79]

I can pair a device and see messages in debug but when I press Deploy I loose device and no more messages. here are some debug messages before I hit Deploy.
08/10/2019, 17:40:24node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "single", linkquality: 105 }
08/10/2019, 17:40:32node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "double", linkquality: 94 }
08/10/2019, 17:40:34node: e2e7d625.f53848
zigbee/0x00158d0003496e82 : msg.payload : Object
{ click: "triple", linkquality: 94 }

Regards,
Gary

Hi,
I have the same Problem. Any solutions?
Best regards