Cant start gobot with raspberry pi adapter and servo driver about gobot

[zankich]

@razic The problem is that the raspberry pi adaptor does not currently support pwm. In order for pwm to work we need to implement support for pi blaster https://github.com/sarfata/pi-blaster.

[razic]

@zankich great. sounds like we're almost there. is it possible you would be able to explain on a high level a bit more in-depth what it would take to get the pi blaster support going?

correct me if i'm wrong, but it seems like pi-blaster is either a process or a script that needs to be run at least once. then, we can write values to /dev/pi-blaster?

[zankich]

@razic I created a branch with initial pi-blaster support https://github.com/hybridgroup/gobot/tree/raspi_pwm. In order to get this to work you'll have to follow the installation instructions for pi-blaster. I don't currently have access to a raspberry pi, so I only tested locally with manually verifying values and it should work.... If you're feeling brave you can check out that branch and let me know how it goes!

[SellJamHere]

Has there been any further work on PWM support?

[zankich]

@razic and @SellJamHere pwm support has just landed in the master branch. You need to follow the instructions here to enable PWM pins.

[edgarsilva]

We should close this since pwm support has been added, or are we waiting for release?

[zankich]

This has been released and I tested with a servo and led on a raspi b+

[matipan]

@zankich Do you have an example I could follow? I'm trying with a MG90 servo tower connected to GPIO 11 on a pi b+ but it does not seem to be working

[deadprogram]

You might want to open a new issue @matipan this one has been closed for a long time.