How to See the Data in an App ? & Simple Wiring to ESP8266 about esp8266-vindriktning-particle-sensor

[Codebysolder]

Hmm, no takers.
Its a shame that for the sake of a basic tutorial on setting this up that such a complex program is likely to be abandoned.
Looking at the other Issues, I am not the only person at a loss to getting this finished.

I have done numerous other ESP projects using Blynk and Thingspeak, so I will have a go at using the data in the serial feed to feed Thingspeak - has anyone else done this ?

I want to use a simple manual configuration of ssid/password for the wifi, so first task is to clear out all the code around this.

I added a Piezo buzzer between port D6 and +3.3V, very useful to indicate the WiFi has connected or whatever you want.
I attach a few pics of a simple way of wiring this up using normal 1/10th inch pitch headers, tweaked so they surface mount and then supported with epoxy resin (not hot melt). I used double sided tape to fix the board (with a 3mm spacer) with the socket available for external connection, easy to reflash with it all screwed together.

[Codebysolder]

After remming out about half the code and adding in Thingspeak, its working.

[Nismonx]

Probably worth doing some reading on MQTT....
Homeassistant, nodered....

[Codebysolder]

I accept that, I did look at the mqtt site and the "quick start" seemed anything but !
I have used Thingspeak for a few projects and it works very well, I prefer it to Blynk.
The code in this project is well beyond my capability, I am not a natural programmer.