Comments (8)
I'm stuck here too, in another issue I read the suggestion of commenting one by one of the "order" block on config to find out what is happening, with all my order block commented I keep seeing the same error.
@morelandjs, did you have any lucky with this?
from i3status.
What’s the result of i3status --version
?
Can you try using the default config?
Can you attach the output of strace -f -s 2048 -tt i3status
?
from i3status.
I'm having the same problem and when I run i3status by itself it outputs this:
i3status: trying to auto-detect output_format setting
i3status: auto-detected "term"
fe80::1187:3b46:85ad:f8e2 | 639.0 GiB | W: down | E: 192.168.1.10 (100 Mbit/s) | UNK 0.00% | 0.01 | 2017-03-02 22:42:36
It seems like it works by itself but doesn't work when it's called by i3bar!
from i3status.
@yashar-sb-sb Please add output_format = "i3bar"
in the general
block of the i3status config. If the issue still persists, please run it from a terminal agan and provide that output.
from i3status.
I'm experiencing the same error. Relevant output of strace -f -s 2048 -tt i3status is,
13:03:14.166716 read(3, "#\n# ~/.config/i3status/config\n#\n\n# common settings for all hosts\n\ngeneral {\n interval = 10\n colors = true\n color_good = "#268bd2"\n color_degraded = "#b58900"\n color_bad = "#dc322f"\n output_format = "i3bar"\n}\n\ntime {\n format = "%a %d %b %R"\n}\n\nload {\n format = "%1min %5min %15min"\n}\n\nbattery 0 {\n format = "%status %percentage %remaining %consumption"\n last_full_capacity = true\n threshold_type = "percentage"\n low_threshold = 10\n}\n\nwireless wlp3s0 {\n format_up = "%essid %quality"\n format_down = "wifi down"\n}\n\norder += "load"\norder += "wireless wlp3s0"\norder += "battery 0"\norder += "time"\n", 8192) = 606
13:03:14.166749 read(3, "", 4096) = 0
13:03:14.166773 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=NULL} ---
13:03:14.175302 +++ killed by SIGSEGV (core dumped) +++
Segmentation fault (core dumped)
Any idea what this might be? Thanks!
from i3status.
Since fully updating my Arch setup I have the same problem as everyone else.
'i3status 2.11 (2017-01-21)'
//EDIT: For whatever reason it works for me now again.
from i3status.
I am experiencing this issue too.
I am running Arch Linux, i3bar v4.20.1, i3status v2.14
I have done the following suggestion which did not resolve the issue
output_format = "i3bar" in the general block of the i3status config
In my case, it seems to be related to using the path_exists module, which when it fails it's check, results in the error message in i3bar but when run from xterm, it prints the format_down message with no problem.
However i have also seen segfaults from xterm too depending on what combination of path_exists and disk is used.
See segfault.txt for journal entry.
EDIT:
I found my problem with path_exists - i needed to add the path attribute to the module. Still it would be good if it failed in a cleaner way :)
from i3status.
@sworthiness I created #489 for your specific segfault.
I’m closing this issue, because the error message can happen for a lot of different reasons. People write “I have the same problem”, but chances are you’re having a different problem that results in the same error message.
If you come across this error, start with a fresh config and copy your config over to the fresh file until i3status fails. Then possibly file a bug for the specific issue you tracked down.
from i3status.
Related Issues (20)
- tztime format_time stopped working? HOT 2
- print_wireless_info buffer overflow HOT 4
- battery: do not show the same value as `neofetch` HOT 1
- I have an issue with i3status about option 'order'. HOT 1
- Battery module incorrectly trims whitespace
- Ethernet iface's with @ in ifname not properly supported
- Fails to build on Mac
- wireless _first_ not working HOT 1
- i3status shows negative WiFi bitrate (integer overflow) HOT 2
- Feature request: Make space between workspace names configurable HOT 2
- Time for a new release? HOT 2
- Default Config Shows IP Address HOT 2
- Battery status strings are limited to 9 characters HOT 1
- [Feature] Add horizontal padding to i3status. HOT 1
- Bogus battery time left (nine hundred hours) – POWER_SUPPLY_TIME_TO_EMPTY_NOW taken as minutes when it is seconds: driver compatibility? HOT 1
- Neither "battery all" nor "battery sbs-6-000b" work
- Fallback format via environment variable
- [Feature] High volume threshold
- [Enhancement] Add `max_width` option
- C file reading is implemented incorrectly HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from i3status.