Graphios is a script to put nagios perfdata into graphite (carbon).
- A working nagios / icinga server
- A running carbon server (carbon-cache.py) (part of graphite)
- Python 2.4 or later
Graphios is release under the GPL v2.
The goal of graphios is to get nagios perf data into graphite (carbon).
The way we accomplish this is by setting up custom variables for services and hosts called _graphiteprefix and _graphitepostfix. This allows you to control the string that gets sent to graphite. You can set just the prefix or just the posfix.
The format is simply:
graphiteprefix.hostname.graphitepostfix.perfdata
What the perfdata is, depends on what perfdata your nagios plugin provides.
A simple example is check_host_alive (which is just check_icmp). The check_icmp plugin provides the following perfstring:
rta=4.029ms;10.000;30.000;0; pl=0%;5;10;; rtmax=4.996ms;;;; rtmin=3.066ms;;;;
My test host looks like this:
define host {
host_name myhost
check_command check_host_alive
_graphiteprefix monitoring.nagios01.pingto
}
Graphios would then send the following to carbon:
monitoring.nagios01.pingto.myhost.rta 4.029 nagios_timet
monitoring.nagios01.pingto.myhost.pl 0 nagios_timet
monitoring.nagios01.pingto.myhost.rtmax 4.996 nagios_timet
monitoring.nagios01.pingto.myhost.rtmin 3.066 nagios_timet
The nagios_timet is the nagios provided unix epoch time when the plugin results were received. The idea behind 'pingto' is that this is the pingtime from nagios01 to myhost.
We have a load plugin that provides the following perfdata:
load1=8.41;20;22;; load5=6.06;18;20;; load15=5.58;16;18
And a service setup like this:
define service {
service_description Load
host_name myhost
_graphiteprefix datacenter01.webservers
_graphitepostfix nrdp.load
}
Would give the following:
datacenter01.webservers.myhost.nrdp.load.load1 8.41 nagios_timet
datacenter01.webservers.myhost.nrdp.load.load5 6.06 nagios_timet
datacenter01.webservers.myhost.nrdp.load.load15 5.58 nagios_timet
(nrdp = what provided the results, load = plugin name, the load1,load5, and load15 are from the plugin).
Who not Automatic names instead of custom variables?
I set this up first actually, I would convert service_descriptions to be 'my-service-description' and have it so that each host was:
hostname.my-service-description.perfdata
This got unorganized pretty fast, so I had to create several custom rules and made a config file to manage all the custom rules. So then you had to manage a custom config file and the nagios configs, which I decided didn't make sense for me. This method may work for some people but for my organization it's just not going to work, so I went with keeping all of the nagios config in nagios. If you have a better idea of how to integrate nagios and graphite I'd love to hear it.
Graphios assumes your checks are using the same unit of measurement. Most plugins support this, some do not. check_icmp) always reports in ms for example. If your plugins do not support doing this, you can wrap your plugins using check_mp (another program I made, should be on github shortly if not already).
This is recommended for intermediate+ Nagios administrators. If you are just learning Nagios this might be a difficult pill to swallow depending on your experience level.
I have been using this in production on a medium size nagios installation for a couple months.
Setting this up on the nagios front is very much like pnp4nagios with npcd. (You do not need to have any pnp4nagios experience at all). If you are already running pnp4nagios , check out my pnp4nagios notes (below).
Steps:
Your nagios.cfg is going to need to modified to send the graphite data to the perfdata files.
service_perfdata_file=/var/spool/nagios/graphios/service-perfdata service_perfdata_file_template=DATATYPE::SERVICEPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tSERVICEDESC::$SERVICEDESC$\tSERVICEPERFDATA::$SERVICEPERFDATA$\tSERVICECHECKCOMMAND::$SERVICECHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tSERVICESTATE::$SERVICESTATE$\tSERVICESTATETYPE::$SERVICESTATETYPE$\tGRAPHITEPREFIX::$_SERVICEGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_SERVICEGRAPHITEPOSTFIX$ service_perfdata_file_mode=a service_perfdata_file_processing_interval=15 service_perfdata_file_processing_command=graphite_perf_service host_perfdata_file=/var/spool/nagios/graphios/host-perfdata host_perfdata_file_template=DATATYPE::HOSTPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tHOSTPERFDATA::$HOSTPERFDATA$\tHOSTCHECKCOMMAND::$HOSTCHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tGRAPHITEPREFIX::$_HOSTGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_HOSTGRAPHITEPOSTFIX$ host_perfdata_file_mode=a host_perfdata_file_processing_interval=15 host_perfdata_file_processing_command=graphite_perf_host
Which sets up some custom variables, specifically: for services: $_SERVICEGRAPHITEPREFIX $_SERVICEGRAPHITEPOSTFIX
for hosts: $_HOSTGRAPHITEPREFIX $_HOSTGRAPHITEPOSTFIX
The prepended HOST and SERVICE is just the way nagios works, _HOSTGRAPHITEPREFIX means it's the _GRAPHITEPREFIX variable from host configuration.
There are 2 commands we setup in the nagios.cfg:
graphite_perf_service graphite_perf_host
Which we now need to define:
I use include dirs, so I make a new file called graphios_commands.cfg inside my include dir. Do that, or add the below commands to one of your existing nagios config files.
NOTE: Your spool directory may be different, this is setup in step (1) the service_perfdata_file, and host_perfdata_file.
define command {
command_name graphite_perf_host
command_line /bin/mv /var/spool/nagios/graphios/host-perfdata /var/spool/nagios/graphios/host-perfdata.$TIMET$
}
define command {
command_name graphite_perf_service
command_line /bin/mv /var/spool/nagios/graphios/service-perfdata /var/spool/nagios/graphios/service-perfdata.$TIMET$
}
All these commands do is move the current files to a different filename that we can process without interrupting nagios. This way nagios doesn't have to sit around waiting for us to process the results.
It doesn't matter where graphios.py lives, I put it in ~nagios/bin . You can put it where-ever makes you happy.
The graphios.py can run as whatever user you want, as long as you have access to the spool directory, and log file.
NOTE: You WILL need to edit this script and change a few variables, they are right near the top and commented in the script. Here they are in case you are blind:
############################################################ ##### You will likely need to change some of the below ##### # carbon server info carbon_server = '127.0.0.1' # carbon pickle receiver port (normally 2004) carbon_port = 2004 # nagios spool directory spool_directory = '/var/spool/nagios/graphios' # graphios log info log_file = '/var/log/nagios/graphios.log' log_max_size = 25165824 # 24 MB log_level = logging.INFO #log_level = logging.DEBUG # DEBUG is quite verbose # How long to sleep between processing the spool directory sleep_time = 15 # when we can't connect to carbon, the sleeptime is doubled until we hit max sleep_max = 480 # test mode makes it so we print what we would add to carbon, and not delete # any files from the spool directory. log_level must be DEBUG as well. test_mode = False ##### You should stop changing things unless you know what you are doing ##### ##############################################################################
For the first time getting this running, just run at the console (vs using the init script). You may want to set log_level to 'DEBUG' and test_mode to True if you want to see what will be sent to graphite. Do not forget to change them back after, as the DEBUG log_level is very verbose, there is a log limit, but why thrash disk when you don't have to?
Some of these can also be set via command line parameters:
$ ./graphios.py -h
Usage: graphios.py [options]
sends nagios performance data to carbon.
Options:
-h, --help show this help message and exit
-v, --verbose sets logging to DEBUG level
--spool-directory=SPOOL_DIRECTORY
where to look for nagios performance data
--log-file=LOG_FILE file to log to
You don't need an init script if you don't want one. For the first time you may want to run graphios.py at console.
cp graphios.init /etc/init.d/graphios chown root:root /etc/init.d/graphios chmod 750 /etc/init.d/graphios
NOTE: You may need to change the location and username that the script runs as. this slightly depending on where you decided to put graphios.py
The lines you will likely have to change:
prog="/opt/nagios/bin/graphios.py" # or use the command line options: #prog="/opt/nagios/bin/graphios.py --log-file=/dir/mylog.log --spool-directory=/dir/my/sool" GRAPHIOS_USER="nagios"
Once you have done the above you need to add a custom variable to the hosts and services that you want sent to graphite.
The format that will be sent to carbon is:
_graphiteprefix.hostname._graphitepostfix.perfdata
You do not need to set both graphiteprefix and graphitepostfix. Just one or the other will do. If you do not set at least one of them, the data will not be sent to graphite at all.
Examples:
define host {
name myhost
check_command check_host_alive
_graphiteprefix monitoring.nagios01.pingto
}
Which would create the following graphite entries with data from the check_host_alive plugin:
monitoring.nagios01.pingto.myhost.rta
monitoring.nagios01.pingto.myhost.rtmin
monitoring.nagios01.pingto.myhost.rtmax
monitoring.nagios01.pingto.myhost.pl
define service {
service_description MySQL threads connected
host_name myhost
check_command check_mysql_health_threshold!threads-connected!3306!1600!1800
_graphiteprefix monitoring.nagios01.mysql
}
Which gives me:
monitoring.nagios01.mysql.myhost.threads_connected
See the Documentation (above) for more explanation on how this works.
Are you already running pnp4nagios? And want to just try this out and see if you like it? Cool! This is very easy to do without breaking your PNP4Nagios configuration (but do a backup just in case).
Steps:
Add the following at the end of your:
host_perfdata_file_template \tGRAPHITEPREFIX::$_HOSTGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_HOSTGRAPHITEPOSTFIX$ service_perfdata_file_template \tGRAPHITEPREFIX::$_SERVICEGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_SERVICEGRAPHITEPOSTFIX$
This will add the variables to your check results, and will be ignored by pnp4nagios.
(find your command names under host_perfdata_file_processing_command and service_perfdata_file_processing_command in your nagios.cfg)
You likely have 2 commands setup that look something like these two:
define command{
command_name process-service-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/service-perfdata /usr/local/pnp4nagios/var/spool/service-perfdata.$TIMET$
}
define command{
command_name process-host-perfdata-file
command_line /bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$
}
Instead of just moving the file; move it then copy it, then we can point graphios at the copy.
You can do this by either:
(1) Change the command_line to something like:
command_line "/bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$ && cp /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$ /usr/local/pnp4nagios/var/spool/graphios"
OR
(2) Make a script:
#!/bin/bash /bin/mv /usr/local/pnp4nagios/var/host-perfdata /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$ cp /usr/local/pnp4nagios/var/spool/host-perfdata.$TIMET$ /usr/local/pnp4nagios/var/spool/graphios change the command_line to be: command_line /path/to/myscript.sh
You should now be able to start at step 3 on the above instructions.
- UPDATE - OMD 5.6 was released on 10/02/2012
- The only changes that you would need to make to 5.6 is add the changes in step 2 (omd-process-host/service-perfdata-file commands)
OMD 5.6 is different form earlier versions in the way NPCD is setup. (Download the 5.6 source code to see the config differences) This guide assumes you are using OMD 5.4 (Current Stable Release)
- Warning I'm not sure of the impacts that this might have when actually upgrading to 5.6
- Make sure to update SITENAME with your OMD site
(1) Update OMD 5.4's etc/pnp4nagios/nagios_npcdmod.cfg so that it looks like this:
# # PNP4Nagios Bulk Mode with npcd # process_performance_data=1 # # service performance data # service_perfdata_file=/omd/sites/SITENAME/var/pnp4nagios/service-perfdata service_perfdata_file_template=DATATYPE::SERVICEPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tSERVICEDESC::$SERVICEDESC$\tSERVICEPERFDATA::$SERVICEPERFDATA$\tSERVICECHECKCOMMAND::$SERVICECHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tSERVICESTATE::$SERVICESTATE$\tSERVICESTATETYPE::$SERVICESTATETYPE$\tGRAPHITEPREFIX::$_SERVICEGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_SERVICEGRAPHITEPOSTFIX$ service_perfdata_file_mode=a service_perfdata_file_processing_interval=15 service_perfdata_file_processing_command=omd-process-service-perfdata-file # # host performance data # host_perfdata_file=/omd/sites/SITENAME/var/pnp4nagios/host-perfdata host_perfdata_file_template=DATATYPE::HOSTPERFDATA\tTIMET::$TIMET$\tHOSTNAME::$HOSTNAME$\tHOSTPERFDATA::$HOSTPERFDATA$\tHOSTCHECKCOMMAND::$HOSTCHECKCOMMAND$\tHOSTSTATE::$HOSTSTATE$\tHOSTSTATETYPE::$HOSTSTATETYPE$\tGRAPHITEPREFIX::$_HOSTGRAPHITEPREFIX$\tGRAPHITEPOSTFIX::$_HOSTGRAPHITEPOSTFIX$ host_perfdata_file_mode=a host_perfdata_file_processing_interval=15 host_perfdata_file_processing_command=omd-process-host-perfdata-file
(2) Update etc/nagios/conf.d/pnp4nagios.cfg
define command{
command_name omd-process-service-perfdata-file
command_line /bin/mv /omd/sites/SITENAME/var/pnp4nagios/service-perfdata /omd/sites/prod/var/pnp4nagios/spool/service-perfdata.$TIMET$ && cp /omd/sites/prod/var/pnp4nagios/spool/service-perfdata.$TIMET$ /omd/sites/prod/var/graphios/spool/
}
define command{
command_name omd-process-host-perfdata-file
command_line /bin/mv /omd/sites/SITENAME/var/pnp4nagios/host-perfdata /omd/sites/prod/var/pnp4nagios/spool/host-perfdata.$TIMET$ && cp /omd/sites/prod/var/pnp4nagios/spool/host-perfdata.$TIMET$ /omd/sites/prod/var/graphios/spool/
}
How to set custom variables for services and hosts using check_mk config files.
(1) For host perf data, its simple just create a new file named "extra_host_conf.mk" (inside your check_mk conf.d dir)
(2) Run check_mk -O to generate your updated configs and reload Nagios
(3) Test via check_mk -N hostname | less, to see if your prefix or postfix is there.
extra_host_conf["_graphiteprefix"] = [ ( "DESIREDPREFIX.ping", ALL_HOSTS), ]
For service perf data create a file called, "extra_service_conf.mk", remember you can use your host tags or any of kinds of tricks with check_mk config files.
extra_service_conf["_graphiteprefix"] = [ ( "DESIREDPREFIX.check_mk", ALL_HOSTS, ["Check_MK"]), ( "DESIREDPREFIX.cpu.load", ALL_HOSTS, ["CPU load"]), ]
Many people are running graphios now (cool!), but if you are having trouble getting it working let me know. I am not offering to teach you how to setup Nagios, this is for intermediate+ nagios users. Email me at [email protected] and I will do what I can to help.
Cool! Drop me a line and let me know how it goes.
Open an Issue on github and I will try to fix it asap.
I'm open to any feedback / patches / suggestions.
I'm still learning python so any python advice would be much appreciated.
Shawn Sterling [email protected]
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent