Comments (3)
Do you know of a simple open source app that runs the NoIR camera? We can look at the code and see what is it different from the INDI V4L2 driver. That's all I can say that as I do not have the camera here to investigate.
from indi.
I have sucessfully used RPi_Cam_Web_Interface (which works fine): https://github.com/silvanmelchior/RPi_Cam_Web_Interface
If that software is to complicate I can search for an easier one and/or run some tests if needed.
I don't think you actually use the raspistill command however here is the output that shows all possible arguments and options:
` raspistill 2>&1
raspistill Camera App v1.3.11
Runs camera for specific time, and take JPG capture at end if requested
usage: raspistill [options]
Image parameter commands
-?, --help : This help information
-w, --width : Set image width
-h, --height : Set image height
-q, --quality : Set jpeg quality <0 to 100>
-r, --raw : Add raw bayer data to jpeg metadata
-o, --output : Output filename (to write to stdout, use '-o -'). I f not specified, no file is saved
-l, --latest : Link latest complete image to filename
-v, --verbose : Output verbose information during run
-t, --timeout : Time (in ms) before takes picture and shuts down (if not speci fied, set to 5s)
-th, --thumb : Set thumbnail parameters (x:y:quality) or none
-d, --demo : Run a demo mode (cycle through range of camera options, no cap ture)
-e, --encoding : Encoding to use for output file (jpg, bmp, gif, png)
-x, --exif : EXIF tag to apply to captures (format as 'key=value') or none
-tl, --timelapse : Timelapse mode. Takes a picture every ms. %d == fra me number (Try: -o img_%04d.jpg)
-fp, --fullpreview : Run the preview using the still capture resolution (ma y reduce preview fps)
-k, --keypress : Wait between captures for a ENTER, X then ENTER to exit
-s, --signal : Wait between captures for a SIGUSR1 or SIGUSR2 from another pr ocess
-g, --gl : Draw preview to texture instead of using video render componen t
-gc, --glcapture : Capture the GL frame-buffer instead of the camera imag e
-set, --settings : Retrieve camera settings and write to stdout
-cs, --camselect : Select camera . Default 0
-bm, --burst : Enable 'burst capture mode'
-md, --mode : Force sensor mode. 0=auto. See docs for other modes available
-dt, --datetime : Replace output pattern (%d) with DateTime (MonthDayHourMinSec)
-ts, --timestamp : Replace output pattern (%d) with unix timestamp (secon ds since 1970)
-fs, --framestart : Starting frame number in output pattern(%d)
-rs, --restart : JPEG Restart interval (default of 0 for none)
Preview parameter commands
-p, --preview : Preview window settings <'x,y,w,h'>
-f, --fullscreen : Fullscreen preview mode
-op, --opacity : Preview window opacity (0-255)
-n, --nopreview : Do not display a preview window
Image parameter commands
-sh, --sharpness : Set image sharpness (-100 to 100)
-co, --contrast : Set image contrast (-100 to 100)
-br, --brightness : Set image brightness (0 to 100)
-sa, --saturation : Set image saturation (-100 to 100)
-ISO, --ISO : Set capture ISO
-vs, --vstab : Turn on video stabilisation
-ev, --ev : Set EV compensation - steps of 1/6 stop
-ex, --exposure : Set exposure mode (see Notes)
-awb, --awb : Set AWB mode (see Notes)
-ifx, --imxfx : Set image effect (see Notes)
-cfx, --colfx : Set colour effect (U:V)
-mm, --metering : Set metering mode (see Notes)
-rot, --rotation : Set image rotation (0-359)
-hf, --hflip : Set horizontal flip
-vf, --vflip : Set vertical flip
-roi, --roi : Set region of interest (x,y,w,d as normalised coordinates [0.0 -1.0])
-ss, --shutter : Set shutter speed in microseconds
-awbg, --awbgains : Set AWB gains - AWB mode must be off
-drc, --drc : Set DRC Level (see Notes)
-st, --stats : Force recomputation of statistics on stills capture pass
-a, --annotate : Enable/Set annotate flags or text
-3d, --stereo : Select stereoscopic mode
-dec, --decimate : Half width/height of stereo image
-3dswap, --3dswap : Swap camera order for stereoscopic
-ae, --annotateex : Set extra annotation parameters (text size, text colou r(hex YUV), bg colour(hex YUV))
Notes
Exposure mode options :
off,auto,night,nightpreview,backlight,spotlight,sports,snow,beach,verylong,fixed fps,antishake,fireworks
AWB mode options :
off,auto,sun,cloud,shade,tungsten,fluorescent,incandescent,flash,horizon
Image Effect mode options :
none,negative,solarise,sketch,denoise,emboss,oilpaint,hatch,gpen,pastel,watercol our,film,blur,saturation,colourswap,washedout,posterise,colourpoint,colourbalanc e,cartoon
Metering Mode options :
average,spot,backlit,matrix
Dynamic Range Compression (DRC) options :
off,low,med,high
Preview parameter commands
-gs, --glscene : GL scene square,teapot,mirror,yuv,sobel,vcsm_square
-gw, --glwin : GL window settings <'x,y,w,h'>
`
from indi.
Many users are reporting issues with using the RPI Cam with INDI for a variety of reasons. We'd appreciate any contribution to to the code (V4L2 INDI driver) to make it more compatible with this camera if possible.
from indi.
Related Issues (20)
- EQMod Goto Slew Rate
- ZWO CCD driver alters biases and darks HOT 5
- Explorestars Exos 2 PMC Eight refuses to connect to connect to EKOS over serial HOT 2
- Failure to build under Windows with Visual Studio 2022
- INDI-Full installation has unmet dependency on avalonud HOT 1
- QHY camera loads different driver after reboot HOT 1
- Dome slaving doesn't work anymore using driver MaxDome II, indi_maxdomeii version 1.4 HOT 2
- IUFillSwitchVector does not populate its name property if initialized with 0 dimension HOT 1
- Wrong guide pulse behaviour with TeenAstro mount driver
- Wrong filenaming when using %C placeholder HOT 1
- Star Adventurer GTI not driven HOT 3
- Silent failure if ampersand is not closed out with a semicolon for entity HOT 3
- indilib-driver-duino-2.0.5 libfirmata not being installed on linux HOT 3
- Cannot connect to flip-flat with virtual serial port unless 'Drop RTS' checks are bypassed as follows HOT 2
- ieaf-focus reversing direction doesn't work HOT 3
- Pegasus PPBA/M missing auto dew aggressiveness setting HOT 4
- "Fast Exposure" option undocumented and unclear HOT 5
- Sesto Senso 2 Bug on TimerHit breaking AF Overscan in Ekos Focus HOT 1
- Sesto Senso 2 Not reporting focuser position correctly
- indi-rpicam does not install HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from indi.