enhancement: support for user defined device about iobroker.hm-rpc

[BuZZy1337]

Did you not get a Message in the ioBroker log like
"send this to developer ......................."
after you added the Device?

[jp112sdl]

No, but I have updated to 1.6.1 from Github and now I see this:

Another user with 1.14.14 has the right view:

[jp112sdl]

Ok... I downgraded to 1.4.14 and have the same issue.

Is there a cache? In an early state of this homebrew device (with 1 channel and 8 values within), I used the names "Sensor 1" ... "Sensor 8".
It appears again and again...

The user, where the values are shown correctly, never used my early version. So he does not have this issue.

In the Webui it shown like this:

[BuZZy1337]

If you have a folder with the Devicename (HM-UNI-Sen-TEMP or UNITEMP0001?) shown under "Objekte - hm-rpc.meta -> VALUES" delete the whole folder HM-UNI-Sen-TEMP or UNITEMP0001 from the Objects.

Then try to resync all devices in ioBroker in the settings of the hm-rpc adapter and check the Logs in ioBroker (Check the checkbox "Resync all devices" and click "Save & Close").. Do you now get any informations directly after the hm-rpc adapter comes up again containing "send this to developer ....."?

[jp112sdl]

Thanks a lot!

Deleting from the meta folder was succesful!

[BuZZy1337]

What about the logs? Did you get a warning after resync of all devices?

[jp112sdl]

Oh, sorry - forgotten
Here are the warn messages:

2018-03-23 15:38:26.494  - warn: hm-rpc.3 No image for "HB-UNI-Sen-TEMP-DS18B20" found.
2018-03-23 15:38:28.392  - info: hm-rpc.3 binrpc -> getParamsetDescription ["UNITEMP001:0","VALUES"]
2018-03-23 15:38:28.465  - warn: hm-rpc.3 Send this info to developer: _id: "hm-rpc.meta.VALUES.HB-UNI-Sen-TEMP-DS18B20.MAINTENANCE.2"
2018-03-23 15:38:28.466  - warn: hm-rpc.3 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"DEFAULT":false,"FLAGS":9,"ID":"CONFIG_PENDING","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":2,"TYPE":"BOOL","UNIT":""},"DEVICE_IN_BOOTLOADER":{"DEFAULT":false,"FLAGS":9,"ID":"DEVICE_IN_BOOTLOADER","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":6,"TYPE":"BOOL","UNIT":""},"LOWBAT":{"CONTROL":"NONE","DEFAULT":false,"FLAGS":9,"ID":"LOWBAT","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":3,"TYPE":"BOOL","UNIT":""},"RSSI_DEVICE":{"DEFAULT":0,"FLAGS":1,"ID":"RSSI_DEVICE","MAX":2147483647,"MIN":-2147483648,"OPERATIONS":5,"TAB_ORDER":4,"TYPE":"INTEGER","UNIT":""},"RSSI_PEER":{"DEFAULT":0,"FLAGS":1,"ID":"RSSI_PEER","MAX":2147483647,"MIN":-2147483648,"OPERATIONS":5,"TAB_ORDER":5,"TYPE":"INTEGER","UNIT":""},"STICKY_UNREACH":{"DEFAULT":false,"FLAGS":25,"ID":"STICKY_UNREACH","MAX":true,"MIN":false,"OPERATIONS":7,"TAB_ORDER":1,"TYPE":"BOOL","UNIT":""},"UNREACH":{"DEFAULT":false,"FLAGS":9,"ID":"UNREACH","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":0,"TYPE":"BOOL","UNIT":""},"UPDATE_PENDING":{"DEFAULT":false,"FLAGS":9,"ID":"UPDATE_PENDING","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":7,"TYPE":"BOOL","UNIT":""}}}
2018-03-23 15:38:28.535  - info: hm-rpc.3 binrpc -> getParamsetDescription ["UNITEMP001:1","VALUES"]
2018-03-23 15:38:28.548  - warn: hm-rpc.3 Send this info to developer: _id: "hm-rpc.meta.VALUES.HB-UNI-Sen-TEMP-DS18B20.WEATHER.2"
2018-03-23 15:38:28.548  - warn: hm-rpc.3 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"TEMPERATURE":{"AutoconfRoles":"WEATHER","DEFAULT":0,"FLAGS":1,"ID":"TEMPERATURE","MAX":150,"MIN":-150,"OPERATIONS":5,"TAB_ORDER":0,"TYPE":"FLOAT","UNIT":"�C"}}}

[GermanBluefox]

@buzzy will you prepare pr? It would be very helpfully. пт, 23 мар. 2018 г., 15:39 Jérôme <[email protected]>:

…

Oh, sorry - forgotten Here are the warn messages: 2018-03-23 15:38:26.494 - warn: hm-rpc.3 No image for "HB-UNI-Sen-TEMP-DS18B20" found. 2018-03-23 15:38:28.392 - info: hm-rpc.3 binrpc -> getParamsetDescription ["UNITEMP001:0","VALUES"] 2018-03-23 15:38:28.465 - warn: hm-rpc.3 Send this info to developer: _id: "hm-rpc.meta.VALUES.HB-UNI-Sen-TEMP-DS18B20.MAINTENANCE.2" 2018-03-23 15:38:28.466 - warn: hm-rpc.3 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"DEFAULT":false,"FLAGS":9,"ID":"CONFIG_PENDING","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":2,"TYPE":"BOOL","UNIT":""},"DEVICE_IN_BOOTLOADER":{"DEFAULT":false,"FLAGS":9,"ID":"DEVICE_IN_BOOTLOADER","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":6,"TYPE":"BOOL","UNIT":""},"LOWBAT":{"CONTROL":"NONE","DEFAULT":false,"FLAGS":9,"ID":"LOWBAT","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":3,"TYPE":"BOOL","UNIT":""},"RSSI_DEVICE":{"DEFAULT":0,"FLAGS":1,"ID":"RSSI_DEVICE","MAX":2147483647,"MIN":-2147483648,"OPERATIONS":5,"TAB_ORDER":4,"TYPE":"INTEGER","UNIT":""},"RSSI_PEER":{"DEFAULT":0,"FLAGS":1,"ID":"RSSI_PEER","MAX":2147483647,"MIN":-2147483648,"OPERATIONS":5,"TAB_ORDER":5,"TYPE":"INTEGER","UNIT":""},"STICKY_UNREACH":{"DEFAULT":false,"FLAGS":25,"ID":"STICKY_UNREACH","MAX":true,"MIN":false,"OPERATIONS":7,"TAB_ORDER":1,"TYPE":"BOOL","UNIT":""},"UNREACH":{"DEFAULT":false,"FLAGS":9,"ID":"UNREACH","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":0,"TYPE":"BOOL","UNIT":""},"UPDATE_PENDING":{"DEFAULT":false,"FLAGS":9,"ID":"UPDATE_PENDING","MAX":true,"MIN":false,"OPERATIONS":5,"TAB_ORDER":7,"TYPE":"BOOL","UNIT":""}}} 2018-03-23 15:38:28.535 - info: hm-rpc.3 binrpc -> getParamsetDescription ["UNITEMP001:1","VALUES"] 2018-03-23 15:38:28.548 - warn: hm-rpc.3 Send this info to developer: _id: "hm-rpc.meta.VALUES.HB-UNI-Sen-TEMP-DS18B20.WEATHER.2" 2018-03-23 15:38:28.548 - warn: hm-rpc.3 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"TEMPERATURE":{"AutoconfRoles":"WEATHER","DEFAULT":0,"FLAGS":1,"ID":"TEMPERATURE","MAX":150,"MIN":-150,"OPERATIONS":5,"TAB_ORDER":0,"TYPE":"FLOAT","UNIT":"�C"}}} — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#63 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AEXqgOlyO78SnoIO8APnNcD_Q2dLvfV9ks5thQkagaJpZM4S3zH5> .

[BuZZy1337]

@GermanBluefox of course, that is why i asked for the logs. :)
PR #64 is ready.