Comments (13)
As far as I know, nothing has been changed on our part regarding the WLAN implementation.
However, I cannot say whether the update from [email protected] to [email protected] changed the WiFi implementation.
the current rolling with [email protected] for testing:
AI-on-the-edge-device__update__rolling_(4049d75).zip
from ai-on-the-edge-device.
Thank you very much. So a special version to test: I only need to install the firmware via OTA to test, correct?
from ai-on-the-edge-device.
@JensHoRi yes this is for OTA update
from ai-on-the-edge-device.
O.k., lets see. I updated and was needed to fully configure everything again... :-(
By the way I saw a new parameter called rssi Treshold maybe responible for all the reboots of the device. Turned it off now. First minutes doesn't show a positive effect. Very interesting:
Just installed new with special espressif. But until yet it looks like still same bad connection! Very confusing, because nothing else had been changed (WIFI Routers still same version, same position)
from ai-on-the-edge-device.
What is the temperature of the ESP, has it increased compared to version 15.4.0?
The ESP may reduce the transmission power because it gets too hot.
With more functions and calculations, the temperature inevitably rises.
My ESP is in a waterproof housing and through the new version the temperature is approx. 5°C higher.
from ai-on-the-edge-device.
@JensHoRi yes this is for OTA update
@SybexX:
It is very welcome when you try to help. But please be fair to the user and inform upfront that this NOT an original OTA update package because config.ini gets overwritten which results in loosing their complete configuration. So they have at least the chance to backup before using such update packages with identical names but different content.
from ai-on-the-edge-device.
Temperature is about 10 degrees lower than before. Around 80 Celsius
from ai-on-the-edge-device.
80°C seems very hot to me, runs it at 240 MHz?
Mine runs at 53°C and with version 15.4.0 it was 48°C.
from ai-on-the-edge-device.
Well, I have got 4 devices bought in two orders. The first two are like yours around 45-55 degrees, while the two from the second order always hat been some hotter. The quality of esps is very different. :/
from ai-on-the-edge-device.
Do the other two also have problems with the WiFi or only the ESPs that get so hot?
from ai-on-the-edge-device.
The other are not in a steel cabinet, so in general better wifi. One of them is the hotter one, so that’s just because of the different manufacturer I believe.
from ai-on-the-edge-device.
I went back to 15.4.0 again. rssi is still better as with 15.7.0, no idea why.
Think I should indead train my eyes and change contacts of ESP to external WiFi adress.
If I'm the only one recognizing wifi issues, you can close this issue.
from ai-on-the-edge-device.
If you want you can test this version, for me the RSSI went down from -47 to -42.
However, my Fritzbox has been going crazy lately, so I can't say with certainty whether the improvement is caused by my change or by the Fritzbox^^
AI-on-the-edge-device__update__rolling_(4049d75).zip
from ai-on-the-edge-device.
Related Issues (20)
- missalginment between ROI settings and Overview HOT 6
- 'TakeImage' in the field 'ImageSize' is invalid. HOT 2
- Digits interpolating direction HOT 1
- TLS not working - supported? HOT 1
- Wasserzähler Digit ROI springt spät um HOT 1
- New Reference picture result in a black screen - No flashlight HOT 5
- Status "Initializing (delayed)" HOT 10
- Option for simple GPIO12 On/Off LED HOT 3
- No Value and Raw value are not correct HOT 4
- Zoomfaktor ändert sich zufällig HOT 1
- Unexpected "rouding" of recognized digit HOT 1
- Web Interface not reachable HOT 6
- [Feature Request] Compatible with other device HOT 1
- Exchanging Meter: Add value to measured value HOT 2
- Datafile CSV import error when neg. rate detected because extra coma HOT 5
- Logs/Data running, Value recording "stop" in between"? HOT 1
- Sending multiple results to influxdb v2
- Raw and read values are significantly differs
- Device not reachable when on VLan
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ai-on-the-edge-device.