Modifying existing ip packets about etherparse

[JulianSchmid]

Hi @shriphani ,

Currently the library does not support an efficient way of changing data and re-calculating checksums.

Probably the easiest way is to decode the headers via PacketHeaders::from_ethernet_slice or PacketHeaders::from_ip_slice modify the decoded data and then updating the checksums via update checksum methods in the ip & transport headers (e.g. Ipv4Header::calc_header_checksum, TransportHeader::update_checksum_ipv4 TransportHeader::update_checksum_ipv6. Finally you will have to write the headers one-by-one.

I will see if I can add methods to simplify the checksum updating & writing in the future. But currently other features have a higher priority (or have been waiting for a longer time).

Greets
Julian

[robs-zeynet]

@JulianSchmid - this is related to the issue I was looking at. One thing that occurred to me was adding PacketBuilder::From<SlidedPacket> and PacketBuilder::From<ParsedHeaders> methods. It's more computationally expensive than just "change the IPs and recalculate the checksums" but is probably more general as well. Thoughts?