How to delete the config? Error after wrong Topic about tdm

[jziolkowski]

Hello.

The confing file is in c:\users<username>\TDM\tdm.cfg

Also I suggest you try the dev branch. It's much better at this time.

[iNDeX999]

Hi,

thank you, now the manager runs.

But how to add Devices? I think it will autodiscover my devices from the IOBROKER?

Regards
Markus

[jziolkowski]

In the dev version?

[iNDeX999]

Yes, now i use the dev version.

I´m connected to the IOBROKER by mqtt...

And then ?

[jziolkowski]

what fulltopics are used by your device? TDM autodiscovers devices following the default fulltopic and the swapped one, used with HomeAssistant.

[iNDeX999]

Default i think

[jziolkowski]

is the topic "sonoff" shared by all your devices? if yes, then it should be changed. Topic should be unique

[iNDeX999]

Ok, can i use the same name for topic and client?

[jziolkowski]

yes, this is irrelevant.

[iNDeX999]

ok, done. All tasmota devices changed.

I restartet the TDM ... nothing to see

[jziolkowski]

what do you see when you connect to your broker and subscribe to the following topic:
tele/#

[iNDeX999]

Sorry, i do´t know what you mean.

[jziolkowski]

do you use discord?

[iNDeX999]

sorry, no

[jziolkowski]

ok.
you need a MQTT client, so you can connect to your broker to see the messages being delivered.
Like this one: http://mqtt-explorer.com/

install it and connect to your broker. Then subscribe to the topic I wrote above

[iNDeX999]

I could not find where to subscribe to the topic, sorry

[jziolkowski]

oh right, mqtt explorer shows all topics.
Does it show any messages? It should, if your devices are connected to the broker

[iNDeX999]

I could not see any message in MQTT Explorer, the devices are all connected

[jziolkowski]

these are logs from iobroker, yes? I need MQTT traffic example.

[jziolkowski]

this is not MQTT traffic. You should see messages being published to topics in mqtt explorer

[jziolkowski]

Again, this is not MQTT output. MQTT explorer should show you messages being received from tasmota devices. This is output from ioborker logs. Different thing. I don't use IOBroker personally, so can't guide you there.

[iNDeX999]

MQTT Exp. shows nothing only "connected" and the "Topic" part on the right is greyed out

Thank you for your time, but i think it´s useless

[jziolkowski]

If your devices use the standard fulltopics, and are correctly connected to iobroker, and TDM as well, then the devices should show up immediately. There are too many variables in your setup outside of my control. I'd gladly help but I can't make sure everything talks correctly there.

[iNDeX999]

to bad, but i use tis config for all Tasmota devices ( except "Client" und after your hint "Topic" )

[jziolkowski]

I have no idea. It's getting late, I'll return to this issue tomorrow.

[iNDeX999]

Or does i think wrong. The Tasmota Device connects to the (Mqtt/IO)broker . TDM connects to the Broker too and subscriped to the same Topic as the Tasmota devices?

[jziolkowski]

the devices subscribe to their respective topics. TDM subscribes to tele/# and stat/# topics (and custom ones, if these are declared) and based on some tasmota logic and LWT messages, it autodiscovers them. That's why I wanted you to show me bare MQTT chatter, to see if all things see each other.

[jziolkowski]

BTW it would be beneficial for you to make an account on Discord, because Tasmota has this great support server there, and soon i'm starting a similar one for TDM

[iNDeX999]

Hi, i´m on Discord now ;)

[Jason2866]

Since TDM 0.2 is released, this issue is outdated