Comments (27)
What Bluetooth adapter is in use on your Linux machine and what MacBook are you using? Is it definitely Bluetooth LE compatible?
from adv360-pro-zmk.
Looks like both have:
btmgmt info
Index list with 1 item
hci0: Primary controller
addr 44:AF:28:10:6E:67 version 11 manufacturer 2 class 0x7c0104
supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising secure-conn debug-keys privacy configuration static-addr phy-configuration wide-band-speech
current settings: powered bondable ssp br/edr le secure-conn
name pop-os
short name
Mabook Pro is from 2017 and since 2012 they should have support.
from adv360-pro-zmk.
It worked with a windows laptop. OS X still with the connection, disconnection loop. Trying to add a bluetooth dongle to the linux machine to see if it works.
from adv360-pro-zmk.
Pop OS is Ubuntu based right? My personal computer is also Ubuntu based and has been very solid with the 360 pro. On the pop OS machine does it also go between connected and disconnected rapidly?
from adv360-pro-zmk.
Yes ubuntu based. It just connects and then inmediately disconnects once (os x gets into a loop). It work fine with my Ipad also. But I'm trying another wifi/bt antenna for pop os cause I have my doubts on that hardware part (tried a speaker and signal was not very clear).
from adv360-pro-zmk.
Just to confirm, you are using a new clear profile for each new device you are trying to pair to? If you try and pair the same device to two different profiles or unpair on one device but not on the keyboard it will not pair or connect to that device
from adv360-pro-zmk.
Yes I tried clearing profiles.
from adv360-pro-zmk.
This issue seems connected, have you tried downgrading your Linux-firmware package?
from adv360-pro-zmk.
I made it work in Pop! OS by using a BT dongle instead of the built-in card. No results yet with OS X.
from adv360-pro-zmk.
Good to hear it's now working on Pop OS, unfortunately I don't have a mac running high Sierra to test with, it's quite an old version, are you able to update the Mac at all?
from adv360-pro-zmk.
Having had the same problem for months with my Adv360, (BT connects & disconnects) and having had to resort to using it wired, I can confirm that the only thing that helped is zmkfirmware/zmk#1487 (comment). I did it in the file config/adv360_left_defconfig
and just rebuilt the firmware. Perhaps that's worth a shot & from what I can tell, the ZMK dev is inclined to make it the default in the future versions if there are no issues.
Additional Info
Intel AX211
NixOS on kernel 6.6.3
from adv360-pro-zmk.
Thank you very much for the feedback. We may well end up implementing this ourselves too
from adv360-pro-zmk.
I've had a similar experience as well, I'm running Ubuntu on a new System76 machine:
➜ ~ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.3 LTS
Release: 22.04
Codename: jammy
➜ ~ btmgmt info
Index list with 1 item
hci0: Primary controller
addr B0:DC:EF:33:4D:FB version 12 manufacturer 2 class 0x7c010c
supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising secure-conn debug-keys privacy configuration static-addr phy-configuration wide-band-speech
current settings: powered connectable discoverable bondable ssp br/edr le secure-conn
name system76-pc
short name
hci0: Configuration options
supported options: public-address
missing options:
For some reason, whenever I just spam pair
request in bluetoothctl
it eventually is able to connect even though it was marked as previously paired.
[bluetooth]# trust F7:83:49:12:61:C6
Changing F7:83:49:12:61:C6 trust succeeded
[CHG] Device F7:83:49:12:61:C6 RSSI: -68
[NEW] Device B0:E4:D5:0D:2C:41 B0-E4-D5-0D-2C-41
[bluetooth]# pair F7:83:49:12:61:C6
Attempting to pair with F7:83:49:12:61:C6
[CHG] Device F7:83:49:12:61:C6 Connected: yes
[CHG] Device F7:83:49:12:61:C6 Connected: no
Failed to pair: org.bluez.Error.AuthenticationCanceled
[bluetooth]# pair F7:83:49:12:61:C6
Attempting to pair with F7:83:49:12:61:C6
[CHG] Device F7:83:49:12:61:C6 Connected: yes
[CHG] Device F7:83:49:12:61:C6 Connected: no
Failed to pair: org.bluez.Error.AuthenticationCanceled
[bluetooth]# pair F7:83:49:12:61:C6
Attempting to pair with F7:83:49:12:61:C6
[bluetooth]# pair F7:83:49:12:61:C6
Attempting to pair with F7:83:49:12:61:C6
Failed to pair: org.bluez.Error.InProgress
[CHG] Device F7:83:49:12:61:C6 Connected: yes
[CHG] Device F7:83:49:12:61:C6 Connected: no
Failed to pair: org.bluez.Error.AuthenticationCanceled
[bluetooth]# pair F7:83:49:12:61:C6
Attempting to pair with F7:83:49:12:61:C6
[CHG] Device F7:83:49:12:61:C6 Connected: yes
[CHG] Device F7:83:49:12:61:C6 Paired: yes
Pairing successful
from adv360-pro-zmk.
Are you using an intel bluetooth controller?
from adv360-pro-zmk.
I'm using this laptop: https://system76.com/laptops/darter
Not entirely sure how to check if it's an intel bluetooth controller, this is all that bluetoothctl
is showing me:
[Adv360 Pro]# show
Controller B0:DC:EF:33:4D:FB (public)
Name: system76-pc
Alias: system76-pc
Class: 0x007c010c
Powered: yes
Discoverable: yes
DiscoverableTimeout: 0x000000b4
Pairable: yes
UUID: Message Notification Se.. (00001133-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: OBEX Object Push (00001105-0000-1000-8000-00805f9b34fb)
UUID: Message Access Server (00001132-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: IrMC Sync (00001104-0000-1000-8000-00805f9b34fb)
UUID: Vendor specific (00005005-0000-1000-8000-0002ee000001)
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: Phonebook Access Server (0000112f-0000-1000-8000-00805f9b34fb)
UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Handsfree Audio Gateway (0000111f-0000-1000-8000-00805f9b34fb)
UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb)
UUID: OBEX File Transfer (00001106-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d0540
Discovering: yes
Roles: central
Roles: peripheral
Advertising Features:
ActiveInstances: 0x00 (0)
SupportedInstances: 0x0c (12)
SupportedIncludes: tx-power
SupportedIncludes: appearance
SupportedIncludes: local-name
SupportedSecondaryChannels: 1M
SupportedSecondaryChannels: 2M
SupportedSecondaryChannels: Coded
I'm guessing it is, because of this:
➜ ~ sudo dmesg | grep -i Bluetooth
[ 1.844935] Bluetooth: Core ver 2.22
[ 1.844958] NET: Registered PF_BLUETOOTH protocol family
[ 1.844959] Bluetooth: HCI device and connection manager initialized
[ 1.844962] Bluetooth: HCI socket layer initialized
[ 1.844964] Bluetooth: L2CAP socket layer initialized
[ 1.844967] Bluetooth: SCO socket layer initialized
[ 1.995226] Bluetooth: hci0: Device revision is 0
[ 1.995237] Bluetooth: hci0: Secure boot is enabled
[ 1.995240] Bluetooth: hci0: OTP lock is enabled
[ 1.995243] Bluetooth: hci0: API lock is enabled
[ 1.995245] Bluetooth: hci0: Debug lock is disabled
[ 1.995248] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1.995253] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 2.010890] Bluetooth: hci0: Found device firmware: intel/ibt-0040-0041.sfi
The adv360 pro is the only device that appears to be having connection issues at the moment, my mouse, and headset are able to connect fine.
from adv360-pro-zmk.
Please try the setting mentioned here: zmkfirmware/zmk#1487 (comment) in adv360_left_defconfig
from adv360-pro-zmk.
Darter Pro uses an intel AX201 it seems: https://tech-docs.system76.com/models/darp8/repairs.html#replacing-the-wireless-card
from adv360-pro-zmk.
@ReFil this seems to have kind of resolved the issue, but now the right side keyboard will randomly not be able to connect to the left side. All I did was set CONFIG_BT_CTLR_PHY_2M=n
in the left config like suggested in that issue. There were some other settings I can give a shot if I keep having issues with the right side not picking up the left.
Appreciate the suggestions and the help!
from adv360-pro-zmk.
Unfortunately, after power cycling the keyboards at the end of the day the right side wasn't able to connect to the left side with the following added to the adv360_left_defconfig
:
CONFIG_BT_CTLR_PHY_2M=n
CONFIG_BT_GATT_AUTO_SEC_REQ=y
Tried it with and without CONFIG_BT_GATT_AUTO_SEC_REQ=y
, and it made no difference.
from adv360-pro-zmk.
Try adding this to left and right defconfigs CONFIG_BT_LL_SW_LLCP=y
from adv360-pro-zmk.
So, I was having a similar rapid disconnect/reconnect problem where I was typically unable to get a working connection on my System76/PopOS laptop (no issues on my macbooks though).
After adding the below lines to the left_defconfig file:
CONFIG_BT_CTLR_PHY_2M=n
CONFIG_BT_LL_SW_LLCP=y
And this line to the right_defconfig file:
CONFIG_BT_LL_SW_LLCP=y
Things seem to be working fine after flashing and a re-pair to the System76 machine.
from adv360-pro-zmk.
Good to hear it's now working on Pop OS, unfortunately I don't have a mac running high Sierra to test with, it's quite an old version, are you able to update the Mac at all?
Updated to Big Sur, still facing same problem, will try this kind of fix:
After adding the below lines to the left_defconfig file:
CONFIG_BT_CTLR_PHY_2M=n
CONFIG_BT_LL_SW_LLCP=yAnd this line to the right_defconfig file:
CONFIG_BT_LL_SW_LLCP=y
from adv360-pro-zmk.
Thanks for the feedback, At this point i'm out of ideas unfortunately, it seems like it just doesn't want to work with your mac
from adv360-pro-zmk.
@JuanPabloMF We have developed a new beta firmware that has some changes in configuration that might improve the Mac issue affecting you. If you would be able to try it and provide feedback it would be much appreciated: 360pro-beta-1-6-24.zip
from adv360-pro-zmk.
@ReFil I just got my Adv360 Pro ZMK today, and have a fair amount of issues with the bluetooth connectivity. It seems to me like your newly developed beta firmware (1-6-24) works much better for me than the previous versions that I tried, namely 3.0 and 3.2-beta. I have not been able to use my configuration on that firmware (i tried hard...), but I assume it can't be used in west.yaml yet...?
System is recently updated Arch Linux.
Connectivity issues seems to be the same both in beta (adv360-z3.2-beta), and in 3.0. The configuration in where I spent the most time was with this west.yaml:
manifest:
remotes:
- name: zmkfirmware
url-base: https://github.com/zmkfirmware
- name: refil
url-base: https://github.com/refil
projects:
- name: zmk
remote: refil
revision: adv360-z3.2-beta
import: app/west.yml
self:
path: config
I have tried various combinations of trust / pair / connect using my systems bluetooth tooling
typical bluetoothctl output below:
$ bluetoothctl
Waiting to connect to bluetoothd...[bluetooth]# Agent registered
[bluetooth]# AdvertisementMonitor path registered
[bluetooth]# [CHG] Controller ZZ:ZZ:ZZ:ZZ Discovering: no
$ scan on
[bluetooth]# SetDiscoveryFilter success
[bluetooth]# Discovery started
[bluetooth]# [CHG] Controller ZZ:ZZ:ZZ:ZZ Discovering: yes
[bluetooth]# [NEW] Device XX:XX:adv360:XX:XX Adv360 Pro
$ trust XX:XX:adv360:XX:XX
[bluetooth]# [CHG] XX:XX:adv360:XX:XX Trusted: yes
[bluetooth]# Changing XX:XX:adv360:XX:XX trust succeeded
$ pair XX:XX:adv360:XX:XX
Attempting to pair with XX:XX:adv360:XX:XX
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[bluetooth]# Failed to pair: org.bluez.Error.AuthenticationCanceled
[bluetooth]# [CHG] Device XX:XX:adv360:XX:XX RSSI: 0xffffffba (-70)
[bluetooth]# [DEL] Device XX:XX:adv360:XX:XX Adv360 Pro
$ connect XX:XX:adv360:XX:XX
Attempting to connect to XX:XX:adv360:XX:XX
[bluetooth]# [CHG] Device XX:XX:adv360:XX:XX WakeAllowed: yes
[bluetooth]# [NEW] Device YY:YY:YY:YY:YY:YY YY-YY-YY-YY-YY-YY
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[Adv360 Pro]# Connection successful
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
[CHG] Device XX:XX:adv360:XX:XX Connected: no
[CHG] Device XX:XX:adv360:XX:XX Connected: yes
this goes on forever.......
At this point, it did seem like I sometimes got signals though, but typically I would press a button, and my system would get stuck on something. For example like thisssssssssssssssssssssss .... (if that makes sense)...
However, on beta-1-6-24, I have no connectivity issues at all. Would very much appreciate if you could make this available for use with my own config, so I can rid myself of the cable clutter on my desk...
If you have any questions I am happy to supply more feedback.
from adv360-pro-zmk.
I added the configuration changes mentioned above:
left_defconfig file:
CONFIG_BT_CTLR_PHY_2M=n
CONFIG_BT_LL_SW_LLCP=y
right_defconfig file:
CONFIG_BT_LL_SW_LLCP=y
This seems to have resolved the issue, but I have not very thoroughly tested it yet.
from adv360-pro-zmk.
These configuration changes will be made upstream with the merging of #326 under the config option of CONFIG_ZMK_BLE_EXPERIMENTAL_FEATURES
. It might cause issues if users have already made the changes separately and thus when it's merged it would be a good idea to remove the CONFIG_BT_CTLR_PHY_2M=n
and CONFIG_BT_LL_SW_LLCP=y
lines where they occur
from adv360-pro-zmk.
Related Issues (20)
- Keyboard halves don't connect to each other after PC wakes up from sleep HOT 12
- Keyboard not detected after hard reset HOT 2
- Receive error code -36 after when trying to flash the firmware HOT 3
- Nx10k
- Unable to flash 360--permissions error HOT 8
- Mini project
- -ddcdb88 HOT 1
- Flashing firmware from Mac HOT 8
- The location to buy iPhones HTML
- Macro is not working for copy and paste HOT 4
- Is the firmware updated on the keyboard? HOT 2
- MacOS Ventura 13.2.1 BLE connection issues HOT 7
- Jhdh
- Workflow build fails at West Build Left step HOT 3
- Updating tapping-term-ms
- Mod + Hotkey 3 does not work HOT 2
- On MacOS the keyboard disconnects and re-connects frequently with bluetooth HOT 1
- No Space Left on drive error on When updating firmware for Advantage Pro 360 HOT 1
- Macro issues when updating keymap HOT 3
- Macro not firing HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from adv360-pro-zmk.