Trigger "sensor below value" releases even if value is above high value. about homey-mi-flora

[koktaildotcom]

Are you sure you don't use the trigger card: Sensor value is outside the configured threshold?

What version you use of the app?
What version you use of Homey?

[betonmoewe]

I have used „the plant has not enough moisure“ just double-checked
version of your app: 2.6.1
version oh homey: 2.1.1

Best regards

Betonmoewe

[koktaildotcom]

I've have reproduced the issue, i'll look into it.

[koktaildotcom]

There is no condition card sensor below value. The description of the condition cards are wrong. There are only condition cards to verify that the sensor within the threshold of the sensor.

The plant !{{has not|has}} enough moisture. should be The plant !{{has not|has}} correct amount of moisture.

I've fixed that in release v2.1.7

For your flow you can use an logic condition for now.

Add a new condition card:

1. Logic
2. [TAG] is lower than
3. [TAG] select [Device -> Moisture]
4. Duplicate the threshold value you want to check