Comments (10)
It is supported, if it has RTL8710BX chip.
How far along does it get before it shows that error? Does it terminate at the beginning or further in the process?
Are you sure the power supply is powerful enough for to power the board?
from ltchiptool.
I actually had the same problem, i just keep repeat flashing until it’s completed.
from ltchiptool.
It is supported, if it has RTL8710BX chip.
I meant it is not listed in the "boards" list. Plus it seems to use a 700k app area, which is causing me issues. But that is for a different discussion.
How far along does it get before it shows that error? Does it terminate at the beginning or further in the process?
It seems like it is sending 51909 bytes.
Are you sure the power supply is powerful enough for to power the board?
No, but I haven't looked into it because it works using the amebaz-image-tool-v2.2. If it was a power supply problem I figure that wouldn't work either.
Just a few points to clarify. I don't have the rts/dtr setup. I manually put the board into download mode. The command I run is:
ltchiptool flash write -d /dev/ttyUSB0 -f ambz hppa11sw-c50ca0.bin
The hppa11sw-c50ca0.bin
file is the original firmware I saved.
from ltchiptool.
Hi,
I've just written a brand new flashing tool for RTL8710 - without relying on rtltool.py
anymore. It seems to be stable now, and supports read-retry and hash checking too. The GUI/CLI is obviously the same (ltchiptool), but it's different under-the-hood.
You can get it here - it's not released yet:
https://github.com/libretiny-eu/ltchiptool/tree/feature/flasher-update
from ltchiptool.
I opened up one of the devices to test but I get the same error:
S: <- TX: B1 26 48 E3 F7 4A F9 A0 78 00 90 E0 78 01 90 20 .&H..J..x...x..
S: <- TX: 79 02 90 60 79 03 90 21 48 A1 79 22 78 63 78 D0 y..`y..!H.y"xcx.
S: <- TX: F8 8C 01 E3 F7 3A F9 5A .....:.Z
S: -> RX: b'\x15'
E: ValueError: Failed to write to 0x8000000
E: |-- File "/home/anthony/ltchiptool/ltchiptool/soc/ambz/flash.py", line 148, in flash_write_raw
I thought maybe it was a power supply issue so I hooked up a supply that would power the device but got the same error.
I will just close this because the work around is to use the other tool to get it on for the first time and now that the ota1/ota2 spacing is fixed I can update using OTA. I'm going to close up the device and let it go.
Thanks for the help.
from ltchiptool.
As I said in my previous comment, the updated version is not released yet. You need to clone the branch that I linked. The error you posted originates from the old tool, so your program wasn't updated.
from ltchiptool.
I did:
commit 057f4512d1ba16f4700db20819cf877eb011144f (HEAD -> master, tag: v4.7.0, origin/master, origin/HEAD)
Author: Kuba Szczodrzyński <[email protected]>
Date: Mon Oct 30 11:38:05 2023 +0100
[release] v4.7.0
Is that the right one?
from ltchiptool.
No, that is the master branch, you need to check out the feature/flash-update
branch.
from ltchiptool.
Ah! That explains it. I looked at the link but I updated later on and must have switched to the master. Sorry for the trouble.
Edit:
So I felt obligated to test again, with the right branch this time :). It worked.
from ltchiptool.
Is anyone able to build this branch into an exe file? Thanks
from ltchiptool.
Related Issues (20)
- Help with a Midea SmartKit Dongle HOT 10
- malware detected ?? HOT 2
- Chip Type - Unrecognized (0x48405F31) HOT 6
- Firmware Dump Analysis HOT 2
- Tuya Storage decryption HOT 13
- Unrecognized chip 0x540A8B75 HOT 36
- v4.11.0 throws errors ... HOT 5
- RuntimeError: Error: 28841002: No permissions. Your subscription to cloud development plan has expired. HOT 7
- ltchiptool-v4.11.1.exe triggers MCAfee Virus threat ti!EBCF3BF55DBF - 4.11.0 does not trigger HOT 1
- Unknown bootloader CRC - 0x2739019F - please report this on GitHub issues! HOT 9
- Unknown bootloader CRC - 0xB7BFA0CE - please report this on GitHub issues HOT 7
- Using Tuya API - subscription cloud development plan has expired. HOT 1
- ltchiptool.gui.base.zc is deprecated ... HOT 2
- Failed to write flash
- Error writing ESPhome kickstart uf2 with ltchiptool v4.11.1 HOT 3
- Non-zero status code: BkFlashRead4KResp(status=6, start=0x0, data=bytes(1)) HOT 30
- Hung in ambztool for RTL8710BX HOT 4
- question - need socket interface HOT 2
- Unknown bootloader CRC - 0x0939FCDA - please report this on GitHub issues HOT 11
- Feature request: Extract/preserve power meter calibration. HOT 17
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ltchiptool.