Comments (7)
⚠️ Linux requirements
appindicator3-0.1
keybinder-3.0
Run the following command
sudo apt-get install appindicator3-0.1
sudo apt-get install keybinder-3.0
from biyi.
The problem still exists after installation
from biyi.
# ls -l |grep appindicator
lrwxrwxrwx 1 root root 25 7月 3 2020 libappindicator3.so -> libappindicator3.so.1.0.0
lrwxrwxrwx 1 root root 25 7月 3 2020 libappindicator3.so.1 -> libappindicator3.so.1.0.0
-rwxr-xr-x 1 root root 67272 7月 3 2020 libappindicator3.so.1.0.0
# ls -l |grep keybinder
lrwxrwxrwx 1 root root 25 3月 8 2020 libkeybinder-3.0.so -> libkeybinder-3.0.so.0.0.0
lrwxrwxrwx 1 root root 25 3月 8 2020 libkeybinder-3.0.so.0 -> libkeybinder-3.0.so.0.0.0
-rwxr-xr-x 1 root root 18056 3月 8 2020 libkeybinder-3.0.so.0.0.0
from biyi.
try to install libuuid
?
sudo apt-get install uuid-dev
from biyi.
libuuid.so
exists,
lrwxrwxrwx 1 root root 16 8月 16 22:10 libuuid.so -> libuuid.so.1.3.0
lrwxrwxrwx 1 root root 16 8月 16 22:10 libuuid.so.1 -> libuuid.so.1.3.0
-rwxr-xr-x 1 root root 30616 8月 16 22:10 libuuid.so.1.3.0
# readelf -s libuuid.so
Symbol table '.dynsym' contains 72 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
2: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
3: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
4: 0000000000000000 0 NOTYPE WEAK DEFAULT UND _ITM_deregisterT[...]
5: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __[...]@GLIBC_2.7 (8)
6: 0000000000000000 0 FUNC GLOBAL DEFAULT UND fcntl@GLIBC_2.2.5 (7)
7: 0000000000000000 0 FUNC GLOBAL DEFAULT UND write@GLIBC_2.2.5 (7)
8: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
9: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
10: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
11: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
12: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __[...]@GLIBC_2.4 (9)
13: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
14: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
15: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
16: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
17: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
18: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
19: 0000000000000000 0 FUNC GLOBAL DEFAULT UND ioctl@GLIBC_2.2.5 (7)
20: 0000000000000000 0 FUNC GLOBAL DEFAULT UND close@GLIBC_2.2.5 (7)
21: 0000000000000000 0 FUNC GLOBAL DEFAULT UND read@GLIBC_2.2.5 (7)
22: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
23: 0000000000000000 0 FUNC GLOBAL DEFAULT UND _[...]@GLIBC_2.3 (10)
24: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
25: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
26: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
27: 0000000000000000 0 FUNC GLOBAL DEFAULT UND umask@GLIBC_2.2.5 (7)
28: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.14 (11)
29: 0000000000000000 0 FUNC GLOBAL DEFAULT UND time@GLIBC_2.2.5 (7)
30: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
31: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
32: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
33: 0000000000000000 0 FUNC GLOBAL DEFAULT UND open@GLIBC_2.2.5 (7)
34: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
35: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
36: 0000000000000000 0 FUNC GLOBAL DEFAULT UND flock@GLIBC_2.2.5 (7)
37: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
38: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
39: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
40: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.3.4 (12)
41: 0000000000000000 0 NOTYPE WEAK DEFAULT UND _ITM_registerTMC[...]
42: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.25 (13)
43: 0000000000000000 0 FUNC WEAK DEFAULT UND [...]@GLIBC_2.2.5 (7)
44: 0000000000000000 0 FUNC GLOBAL DEFAULT UND _[...]@GLIBC_2.3 (14)
45: 0000000000000000 0 FUNC GLOBAL DEFAULT UND [...]@GLIBC_2.2.5 (7)
46: 0000000000002f30 227 FUNC GLOBAL DEFAULT 11 uuid_[...]@@UUID_2.31
47: 0000000000003460 9 FUNC GLOBAL DEFAULT 11 uuid_u[...]@@UUID_1.0
48: 0000000000003110 68 FUNC GLOBAL DEFAULT 11 uuid_i[...]@@UUID_1.0
49: 0000000000003580 89 FUNC GLOBAL DEFAULT 11 uuid_v[...]@@UUID_1.0
50: 0000000000002e80 66 FUNC GLOBAL DEFAULT 11 uuid_g[...]@@UUID_1.0
51: 00000000000020f0 8 FUNC GLOBAL DEFAULT 11 uuid_clear@@UUID_1.0
52: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS UUID_1.0
53: 0000000000003020 227 FUNC GLOBAL DEFAULT 11 uuid_[...]@@UUID_2.31
54: 0000000000003450 9 FUNC GLOBAL DEFAULT 11 uuid_u[...]@@UUID_1.0
55: 0000000000003530 68 FUNC GLOBAL DEFAULT 11 uuid_type@@UUID_1.0
56: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS UUID_2.31
57: 0000000000002310 1571 FUNC GLOBAL DEFAULT 11 _[...]@@UUIDD_PRIVATE
58: 00000000000035e0 190 FUNC GLOBAL DEFAULT 11 uuid_[...]@@UUID_2.31
59: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS UUID_2.36
60: 00000000000031a0 459 FUNC GLOBAL DEFAULT 11 uuid_[...]@@UUID_2.36
61: 0000000000003480 173 FUNC GLOBAL DEFAULT 11 uuid_time@@UUID_1.0
62: 0000000000002d90 235 FUNC GLOBAL DEFAULT 11 _[...]@@UUIDD_PRIVATE
63: 00000000000021a0 26 FUNC GLOBAL DEFAULT 11 uuid_copy@@UUID_1.0
64: 0000000000002d80 5 FUNC GLOBAL DEFAULT 11 uuid_[...]@@UUID_2.20
65: 0000000000002d70 5 FUNC GLOBAL DEFAULT 11 uuid_g[...]@@UUID_1.0
66: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS UUID_2.20
67: 0000000000003370 61 FUNC GLOBAL DEFAULT 11 uuid_parse@@UUID_1.0
68: 0000000000002100 149 FUNC GLOBAL DEFAULT 11 uuid_c[...]@@UUID_1.0
69: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS UUIDD_PRIVATE
70: 0000000000003470 12 FUNC GLOBAL DEFAULT 11 uuid_u[...]@@UUID_1.0
71: 0000000000002ed0 89 FUNC GLOBAL DEFAULT 11 uuid_g[...]@@UUID_1.0
I can't find uuid_generate
in libuuid.so
version 1.3.0.
Could you share your uuid lib?
from biyi.
add this line
target_link_libraries(${PLUGIN_NAME} PRIVATE uuid)
from biyi.
Removed <uuid/uuid.h>
leanflutter/tray_manager@017633b
from biyi.
Related Issues (20)
- 支持自定义/切换openai的模型
- rise_ui这个依赖在哪下? HOT 1
- 快捷键bug
- m1 pro无法打开biyi0.4.0
- mac m1 monterey 打不开 0.4.0+11 HOT 2
- 请教 biyi 的 pin 功能是如何实现的
- 求支持deepL接口域名翻译 HOT 2
- 提交到aur里一份吧
- Add support to English and Spanish
- Mac M1 无法启动(v0.4.0) HOT 2
- How to build for linux HOT 1
- Can't install on Kali Linux
- 不能支持pdf取词翻译 HOT 1
- [Archlinux] 编译失败 HOT 1
- 有道ocr的API 的结果显示 ErrorCode: 0
- 翻译无结果,设置里面提示:无可用的引擎 HOT 3
- 桌面悬浮功能是如何实现的? HOT 1
- 源语言是否可以和google匹配以支持小语种
- 请问能否支持deeplx HOT 1
- debian12已经将状态栏依赖升级了,导致没法安装建议出一个flatpak或者appimage包 HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from biyi.