Comments (13)
Press and hold the BOOT/IOO (whichever your board has) as soon as you press the upload button. Release when it says the upload is done. That should do it
from lucidgloves.
it got closer but it said
esptool.py v3.0-dev
Serial port COM3
Connecting....
Chip is ESP32-D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 84:cc:a8:3f:6c:38
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Warning: Could not auto-detect Flash size (FlashID=0x0, SizeID=0x0), defaulting to 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 5461.4 kbit/s)...
A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet header
from lucidgloves.
Can you try holding the button down until it finishes uploading?
from lucidgloves.
I did
from lucidgloves.
it did the same thing
from lucidgloves.
What board do you have set in the IDE?
from lucidgloves.
where do you check
from lucidgloves.
It's under tools
from lucidgloves.
ESP32 Dev module
from lucidgloves.
Try switching that to Node32s
from lucidgloves.
same error
Sketch uses 949498 bytes (72%) of program storage space. Maximum is 1310720 bytes.
Global variables use 31172 bytes (9%) of dynamic memory, leaving 296508 bytes for local variables. Maximum is 327680 bytes.
esptool.py v3.0-dev
Serial port COM3
Connecting....
Chip is ESP32-D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 84:cc:a8:3f:6c:38
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Warning: Could not auto-detect Flash size (FlashID=0x0, SizeID=0x0), defaulting to 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 5957.9 kbit/s)...
A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet header
from lucidgloves.
Have you downloaded these drivers? Its 4th in list https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
from lucidgloves.
I'm assuming this issue is fixed. I'll close this issue now, but feel free to reopen if you're still running into problems.
from lucidgloves.
Related Issues (20)
- Buttons and Joysticks for Prototype 5? HOT 1
- Can't get lucidgloves to work with steamVR HOT 3
- Linux support? HOT 3
- gloves dont connect HOT 3
- CV1 controller tracking HOT 1
- Haptic feedback not working
- My computer doesn't see the glove in the bluetooth settings HOT 1
- When I connect with Bluetooth, I always disconnect, I can't connect, and I can't track my location in real time when I connect with USB. Is there a wiring problem? HOT 2
- Using only haptic feedback HOT 1
- Hello friends, I am a student from China. I made a one-handed glove, but I couldn't get feedback from ALEX. How can I solve it HOT 3
- Quest 3? HOT 3
- Serial mointer working on v4 but not v5 HOT 1
- Hall effect sensor (rotary encoder) for the V5 HOT 1
- Nothing In serial Monitor
- V4 middle pot is backward
- Adding IR LED's around wrist to provide quest tracking HOT 2
- lucid gloves
- What is pin32 being used for?
- Wiki - Prototype 5 build guide images no longer valid HOT 1
- commulation problesms HOT 7
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from lucidgloves.