Choosing ESP32 DevKit v4 (38 GPIOS) as board doesn't allow the user to set custom pins for display control about lv_port_esp32

[jeremyjh]

In my case i have a debugger connected so I can't use the "standard" pinout.

In that case the correct choice in the menu is "None", because you do not want to use predefined pins.

[jeremyjh]

If you have that board nothing prevents you from simply using custom pin settings (although then you won't be using HSPI). Why would you want to pick pre-defined pins and then also pick the pins?

[C47D]

Hi,

This issue was created to track this suggestion: #44 (comment)

I guess that in case of wanting custom pins the user should choose the None option on the Predefined board pinout?

Maybe @Mat-Alm wants to choose different pins for the non SPI signals?

[Mat-Alm]

If you have that board nothing prevents you from simply using custom pin settings (although then you won't be using HSPI). Why would you want to pick pre-defined pins and then also pick the pins?

You are wrong! Nothing prevent you to use any pins to "HSPI" or "VSPI". Yeah esp32 has many bugs one of then is related with MISO line on HSPI but in this case the display does not use MISO :) .

In my case i have a debugger connected so I can't use the "standard" pinout.

[C47D]

In my case i have a debugger connected so I can't use the "standard" pinout.

In that case the correct choice in the menu is "None", because you do not want to use predefined pins.

This is the solution