v0.10 does not go to full speed about bluejay

[mathiasvr]

@koen352003 Thank you for the report!

I don't know what could have caused this issue other than the mentioned setting, so it's strange using v0.9 would work - maybe the settings were not the same for some reason.
Anyway, I think we can close this for now then.

[ericogr]

I'm using the same mamba f405 mk2 stack, and for me 0.12 (test1) has been working and flying perfectly fine on defaults.

Same here. Today, experimented 4x1 Mamba F40HV ESC with C-H-40, 0.12, 48 kHz, Bluejay (BETA) with 6S battery with success!
Params:

startups: 1010/1028
timing: mediumHigh
demag: high
rampup: 5x

[mathiasvr]

Hi, thanks for the report!

That sounds strange, having the rpm protection setting very low could cause this, are you sure it was at default of 9x?
If that's the case I will have to examine the C layout more closely.

[mathiasvr]

@KingKone Can you confirm this happens with the default settings?

[koen352003]

I'm using the same mamba f405 mk2 stack, and for me 0.12 (test1) has been working and flying perfectly fine on defaults.