ReoLink never loads about ha-fusion

[matt8707]

Can you post the yaml for each camera?

[versionDefect]

I was able to figure out what the issue is. The quality of these cameras are very high. I think 2k and 4k.

I changed the stream from the primary stream -> the substream which is significantly worse quality but it does load in HA-Fusion.

Config for these cameras are just regular RTSP streams into the camera- nothing special there.

[t0bse]

it's a problem with the resolution i think. did you try to setup the camera in lovelace dashboard, is it working?
maybe you could try to setup your camera as "generic camera" not reolink addon, that works for me.
but on my android tablet, i can only use the low res stream, it's a hardware problem.

[versionDefect]

it's a problem with the resolution i think. did you try to setup the camera in lovelace dashboard, is it working? maybe you could try to setup your camera as "generic camera" not reolink addon, that works for me. but on my android tablet, i can only use the low res stream, it's a hardware problem.

strange. Funny enough I already use the Generic camera option. ONVIF was giving me issues with scrypted so I just elected to use the generic camera option.

This is where it becomes strange. So I've got 3x cameras right now to debug
Camera A: Doorbell which is set to main stream aka best quality
Camera B: Set to substream.
Camera C: Set to main stream.

So here is something I noticed. I am an insane man so I use Firefox as my primary browser, it seems that camera A works normally and B requires it to be set to the substream but works. I assume the same would work for Camera C but I haven't tried yet.

The interesting this ALL cameras seem to load in a Chromium-based browser (I used Edge because like I've previously mentioned I'm a crazy man).
Even MORE interesting, is that I have all the cameras set to live view when I load into Fusion, on Edge AND Firefox only cam A and B come up as a live view, which are the only cameras that load in Firefox.